sean-ff 10 Posted August 30, 2015 Hi all im doing a bit of maintenance work over the next few weeks on my vr6, started off with a driveshaft and balljoint but with further inspection im now replacing both driveshafts, balljoints, polybushing the wishbones, track rod ends, inner tie rods, new pads, disks and service the calipers. im now at the stage where only thing thats remaining to be removed is the inner tie rods and im just wondering if its easier for me to drop the steering rack on the subframe to change these and at same time give the subframe a tidy up. Many thanks Sean Quote Share this post Link to post Share on other sites
Tjninny 10 Posted August 30, 2015 Well worth it - looks like it's only the rack and subframe you've not done so far. Quote Share this post Link to post Share on other sites
sean-ff 10 Posted August 30, 2015 well i took the plunge and dropped the subframe, alot easier than first thought and glad iv done it now, next is to get it cleaned up and powdercoated Quote Share this post Link to post Share on other sites
