Knocking sound VR6

[Ostkakan 11]

Hello all

I have this wierd knocking sound coming from my left side wheel.

The sound comes when i turn left or right gear 1 and it stops when i press the clutch down.

I have replace the clutch and release bearing 2 years ago.

I have replace left driveshaft, wheel bearing left side and top mount

Today i check right side and i cant hear any bad from wheel bearing or dirveshaft.

I  used this Wheel bearing SKF VKBA 1491 - Driveshaft VKJC 1037 - Top mount Powerflex PFF85-239

Now i have no idea what the issue is  mabye some gearbox problem?  Here comes 2 videos this is from today.

 

 

 

[fla 9]

If you lift each side and spin the wheel by hand you might be able to identify the source. 

[Ostkakan 11]

28 minutes ago, fla said:

If you lift each side and spin the wheel by hand you might be able to identify the source. 

I have done it only on front, can't find anything wierd

[Dox 22]

Sounds like a knackered CV to me?

[Ostkakan 11]

13 hours ago, Dox said:

Sounds like a knackered CV to me?

Yeah, before I changed wheel bearing i only had sound tuning right now I have both sides abit wierd. Left cv is changed. 

[Dox 22]

Jack the car up, put the steering on full lock left / right and push / pull on the CVs.

 

Also look for signs of any interference marks where components could be touching

[Ostkakan 11]

1 hour ago, Dox said:

Jack the car up, put the steering on full lock left / right and push / pull on the CVs.

 

Also look for signs of any interference marks where components could be touching

Thanks i will check that

[Ostkakan 11]

Forgot to say i got alot of vibrations on steering wheel after 20km driving. 

[Ostkakan 11]

Update.

Changed right driveshaft today, the old one fall in to pieces when it got removed 🙈

I still have some knocking sound, I found out left driveshaft have some play when i push it out and in. The left shaft is new. Should that be any play?

 

[Dox 22]

Push in towards the gearbox, pull out towards the hub? Yes, the shaft has to lengthen and contract as the suspension elongates and compresses. The distance between the gearbox and hub varies in use

[Ostkakan 11]

Just now, Dox said:

Push in towards the gearbox, pull out towards the hub? Yes, the shaft has to lengthen and contract as the suspension elongates and compresses. The distance between the gearbox and hub varies in use

I dont see it pull out towards the hub, it feels more on the inner cv/gearbox moves. When i push it i have a play for like 5mm, i dont have any play on the right side.

I think to remove the shaft tomorrow and check it out.

[Dox 22]

Its the inner CV that has length adjustment, in out is fine, up / down /around is bad

[Ostkakan 11]

25 minutes ago, Dox said:

Its the inner CV that has length adjustment, in out is fine, up / down /around is bad

Okej, thats wired that it still have knocking/ticking... 

[Dox 22]

Just now, Ostkakan said:

Okej, thats wired that it still have knocking/ticking... 

It could still be faulty, just in / out is not a sign of a faulty joint

[Ostkakan 11]

1 hour ago, Dox said:

It could still be faulty, just in / out is not a sign of a faulty joint

Okej thanks. Would be super bad luck with new and faulty joint

[1xshaunx1 27]

13 hours ago, Ostkakan said:

Okej thanks. Would be super bad luck with new and faulty joint

It happens sometimes unfortunately and can’t be discounted 

[Ostkakan 11]

3 hours ago, 1xshaunx1 said:

It happens sometimes unfortunately and can’t be discounted 

Ahh really that suck. About abs light it came on after wheel bearing change, don't know what to do about it. The sensor have same gap compare to other side. 

[1xshaunx1 27]

Is the plug connection good, what make of sensor and is the abs ring ok

[Ostkakan 11]

13 minutes ago, 1xshaunx1 said:

Is the plug connection good, what make of sensor and is the abs ring ok

Abs ring is new, there is 2 different type of sensor. The right looks more older, this one is aluminum type

Edited July 25, 2021 by Ostkakan

[1xshaunx1 27]

I’d try a new sensors, I’m not sure of part numbers though, I’ve not had to do this. 
If you've hade a lot of vibrations something could of broke or come loose. 

[1xshaunx1 27]

The one in you hand doesn’t quite look right. 
Have a read of this thread it’s short but gives you an idea

 

[Ostkakan 11]

5 minutes ago, 1xshaunx1 said:

I’d try a new sensors, I’m not sure of part numbers though, I’ve not had to do this. 
If you've hade a lot of vibrations something could of broke or come loose. 

Okej will try find one. I don't have a reader for fault codes. Mabye it just work to clear the code. I need to buy a VCDS VAG-COM 

[Ostkakan 11]

1 minute ago, 1xshaunx1 said:

The one in you hand doesn’t quite look right. 
Have a read of this thread it’s short but gives you an idea

 

Thanks 

[1xshaunx1 27]

That sensor in your hand is for earlier Corrado’s and has the wire attached to it that goes through the wings. Later ones had the sensor that you show from ecs that has a separate wire from the sensor and you plug it in on the hub. Your car should be fitted with the same type though so I don’t know why you have both types. What year is your car

[Ostkakan 11]

17 minutes ago, 1xshaunx1 said:

That sensor in your hand is for earlier Corrado’s and has the wire attached to it that goes through the wings. Later ones had the sensor that you show from ecs that has a separate wire from the sensor and you plug it in on the hub. Your car should be fitted with the same type though so I don’t know why you have both types. What year is your car

Yeah I saw that on the other side. Its from 93. Then I need to find same as ecs type