vw bobby

If g0ldf1ng3r does not want this, then I will take it off your hands mate?

Cheers guys, that is a big help, now I am thinking of selling the AUG and going for a BAM engine, as it more of a beneficial option for me

Cheers EJ, that is a big help mate

Will this work? Basically I am looking at a turbo manifold for a K04 conversion and seen this one: http://www.ebay.co.uk/itm/360738089273?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649 It states it can only be used on: Audi TT 1.8T turbo 2000-2006 models. VW Golf MK4 1.8T turbo 1999-2006 models. VW Jetta 1.8T turbo 2000-2005 models. VW Beetle 1.8T turbo 1999-2005 models. Seat Leon 1.8T turbo 1998-2004 models. So will this suit my AUG engine, which came out of a 1998 Audi A3?

That is a big help mate, I am only looking for about 250-260bhp and about 280lbft, as it will be a daily driver. Thanks again for all the help mate

haha :thumbleft:

Would it not be easier to upgrade the manifold to a transverse tubular manifold and the run a KO4 on the AUG engine?

Also this is a big help, cheers guys

I would love a vrT, but the insurance will be a nightmare, let alone what the 1.8T will be, but hopefully still cheaper. Also 1.8T will be cheaper on the fuel to a VrT

Hi All, I am looking to do a 1.8T AUG engine swap in my corrado soon and I already have the engine. I want to up rate the turbo, but which is the best turbo to use on my engine with standard internals? Also what is the maximum power output the standard internals can take? Cheers Bobby

Picture would help mate

I managed to find them second hand mate, but G23 do them, here is the website http://www.g23engineering.com/ Also there are a few guys on ebay that do them

I have managed to solve my problem now, I noticed it had adapters on the car initially, but the guy who I bought it off did not have the right ones. So now I have ordered the right ones, which are 4x100>5x120, so will sit as the original picture was. Thanks for all the input guys and girls. Cheers

That would be interesting to know

Hi all, I just want to find out will this be legal and not? I need to run these adapters, which will be 4x100>5x120 to suit my wheels and these are the slimmest I can get, which are 20mm. My wheels are 9.5 x 16 ET24 and maybe will be will 20mm adapters. Here is a pic of them without adapters: Here is a pic with them on: Any ideas what I can do? Or shall I just get my hubs drilled for a 5th hole and run 5 or 10mm spacers? Cheers Bobby

I'll be down to this, do I need to book tickets in advance for show and shine or can I pay on the day?

Nice looking Rado, welcome mate

cheers mate that is a big help

cheers mate

Hi all, I just would like to find out what is the best size tyre to run on my steels, the rim size is 5.5" x 15" it will be on a corrado, which is lowered? Cheers Bobby

Cheers Jim that is a big help

Hi all, I just want to find out I have a 1991 corrado with a 4 x 100 stud pattern and have a set of wheels which are 5 x 120 stud pattern. I have been searching everywhere for a set of adapters and are a nightmare to find and cheapest set I found is £300. So I was basically thinking if I was to swap my hubs to make the a 5 x 100 stud pattern from a vr6 corrado, what other parts would I need? As then I can just buy adapters for the 5 x 100 to 5 x 120, which are a lot cheaper Cheers Bobby

Hi All I am looking for wheels adapters from 4 x 100 to 5 x 120? Please give me a shout if some one has some knocking around with all bolts attached. Cash waiting Cheers Bobby

Hi all I just wanted to find out is there convoys traveling from West London Heathrow? Cheers Bobby

Hi Dave, Thanks for getting back to me. You have a PM Bobby