anubis
-
Content Count
205 -
Joined
Everything posted by anubis
-
Just fitted the new wheels to the car, needed a 6mm spacer on the rear, and I think I'll be needing to fit some new suspension to the car due to the rubbing I heard. As you can see form the 4th pic, it's all pretty tight in there. Looks good though, worth the wait. 8)
-
No, they're "Weitech" springs and shocks, lowered 45 mm. The springs' actually nowhere near the tyre, it's this guard / cap thing that is. I'll hopefully be having a look in a bit. Did you use the spacers in the end?
-
Andy, I've got 215/40/17 on the wheels, and used a 6mm spacer on the front, and the tyres rubbed. When I took it off, they were able to go lock to lock with no rubbing. The problems here are 1) the tyre is a fingers' width from the arch, and 2) on the inside the tyre is about 4mm from the cap / guard at the bottom of the suspension spring [which you don't seem to have in your photo]. I'm getting a guy to come over later to check it out... :? ....will post the pics.
-
Have you got them as well too Hot ?
-
Andy, let me know how you get on with fitting? I tried them without the spacers and it's so tight it's untrue, can just about get my fingers between the tyre and the arch. Looks good though ! 8) Where did you get them from, RSD ?
-
Just spacers.......that pic in your avatar, they're the wheels I'm fitting! Great stuff. 8)
-
Cheers, I was thinking around 8 / 10 mm for the front. I could get them from Demon Tweeks, made by Eibach, but there's a 3 week wait involved.
-
Does anyone have the details of a company that sells spacers with locating rings for 5x100 ? I've tried Demon Tweeks, Elite Direct, Hyperformance...... Any other suggestions? Wanna get these wheels on, they're wasted on the living room! :cry:
-
I've met a few people with this spoiler, and seen as many different ways of securing it. Those that did it differently to the instructions: some have gone for actually bonding the sides to the top of the headlamp cases, and some for a massive overload on the velcro, allowing easy removal.
-
How'd he get those dials like that ?
-
I think it's the rear passat handles.............. http://the-corrado.net/.archive/forum/viewtopic.php?t=5631
-
What was the name of the Alfa Romeo [379 Bhp] shown at the start of the show ?
-
Also, what are the specs for the storm with a Supercharger ? bhp / torque / 0-60 etc......
-
Could try the seals around the hatchback window / boot. I had a problem like that in my old Golf, caused by the smallest of damage to the seal.
-
Ahh.......wise advice indeed. :wink:
-
If I buy this "roll on" upgrade, can I stick 7 assorted Max Power stickers to the paint, or will I need to take the Blue Tac holding the side skirts on? Also, can I then use Prit-Stick to add pink neons to the underside of the car? If so how would that add to the performance, I heard they give you an extra 500lb/ft torque, is this true? I'd basically be trying to beat Tippex-Man, tough I know, but you've gotta have goals !!
-
Christ, I'll get involved in some of that for £89 !!!
-
He's obviously forgot to have his name added to the blank space on the sun visor, so we all know who's "VR6" it really is! :roll:
-
I think what you saw may have been this. I read somewhere else that it was a hoax, and that kinda makes sense, especially when you see the picture, and read the fantasy engine specs. :roll: http://www.eurotuned.com/vw/new_corrado.htm
-
I've got the RAM Air kit from AMD. think it was about £125 fitted..........sounds absolutely superb :twisted: :D
-
Yeah....here you go....
-
Yeah, it's now between OZ Titans and Oxigin 2's. I think the Oxigin 2's are ahead at the mo, but the Titan's are a solid choice......
-
Cheers :) :) What do you think of them ?
-
Hey there, Has anyone seen what OZ Titans look like on a Corrado ? Any Pics ?
-
Red 16v M reg parked at Oakes Park Golf club today ??