Riley
-
Content Count
4,578 -
Joined
Everything posted by Riley
-
nah,itll be fine m8. :lol:
-
...i reckon :lol:
-
ahh ive gone for the clear/red for mine. be good to see what the smokies will look like m8 :D
-
joebrent, is your c black? sorry my eyes are crap! what colour lights you gone for? :-) neil. :D
-
welcome :D
-
fitted the de-cat pipe today! :D sounds totally diffarent,more throaty! and theres a real difference mostly at the bottom end i reckon,but it seems to rev better all the way through the rev range. as per usual though it wasnt a straight fit,it wasnt long enough :? had to chop it in the middle and put a piece in but all went smoothly apart from that. 8) neil.
-
phew,not me neither? so the sets should hopefully be replaced for the other guys then? 8) neil.
-
id give some 5mm shims a try m8,although being et35 you shouldnt have any problems... maybe its just the height of the wheel thats causing the rubbing? neil. :D
-
here ya go m8,i think tempest means the male version of these... edit: how slow am i??????????? :lol:
-
ok thanks m8,ill have a look about :D richards (venom) not far away from me,can normally save on delivery so i may give him a shout. neil.
-
thanks for the fitting tip,had to do the same with the m3's on the sportline... well done m8 8)
-
cheers kevhaywire,do the likes of big boys toys sell the bonrath kit? heard anything bad about the storm kits? cheers,neil. :)
-
offse or et will be stamped on the inside of the wheel or where the center cap is. ideally you want 35 i think? you could safely use 10mm shims/spacers,but just watch for catching your wheel arches then. :)
-
what kits are you guys using? i tried fitting an xtreme kit off ebay,and well to be honest it was an absolute pile of shit :roll: it was catching everywhere (3 places) and the wiper spindle was bending and twisting. and yep everything was fitted correctly,the instructions advise that bending the linkage may be needed... what a load a bollocks that is! neil. :?
-
stevemac,suppose i can hope,but its just not my luck m8... :cry: cheers for the comments guys,and the p/shop shilakadaddy! so now i have to let the mods commence? just no more days like today! :lol:
-
nice spec so far m8! best to do it ya self,so ya know its done right 8) neil.
-
hope so,these could cheer me up after reversing into what looked like a pug of some description,well i dunno? it was hard to see with all the fibreglass in the way :mad: :cry:
-
cheers,had the mk1 nearly 6 years now... today has not been good :mad: spent hours trying to fit a single wiper which is absolute fuckin sh1te,so im sending it back. and then reversing out of my mates garage,i went right into a chavved/fibreglassed/piece a sh1t pug 106 thing?. smashed fibreglass everywhere. havent looked at the rear of the raddo,cant be ar$ed and dont wanna know...
-
nice one m8 8) ill keep that in mind... neil.
-
thanks m8,am i right in thinking the fuel filter is under the rear drivers side sill/arch? well under the floorpan? neil. :D
-
:lol: cheers m8,think a black centered wheel would look ok then? neil.
-
thanks a lot guys,much appreciated :!: h100vw,the charger was rebuilt to stage 2 at jabbasport 10k miles ago... seems to be pushing around 11psi,after the mfa type check. :) do you mean go for an original vw oil filter h100vw? cheers again people :D neil.
-
aye,note to self>> must sleep! :lol: funny you say,im used to mk1 golfs,just got my first raddo,a g60 :D catch ya later m8,neil.
-
sounds like its working fine then? unless its just missing the intermittent which im not sure on anyway??? the mfa stalk isnt supposed to click or anything,theres just a couple of brass contacts inside the stalk that make a connection. :D neil.
-
ok m8 total guess but yeah i reckon it should be an intermittent rear,being 1990 spec>>>... :D mk2's arent my strongest point as you can tell with the non 100% sure stylee answers :oops: neil.