George Lee
Members-
Content Count
87 -
Joined
Content Type
Profiles
Forums
Blogs
Calendar
Articles
Gallery
Downloads
Store
Everything posted by George Lee
-
Cheers for all the replys, I will have a look around 👍
-
Where can I buy new ones from ?
-
I had the same problem when I got mine, the pedal kept sticking to the floor. I replaced the slave cyclinder and it didn't look the best. I bought a bleed kit that you attach to your spare wheel for pressure. I attatched the pipe on the slave bleed nipple ( obviously loosend ), also took the cap of the resivour and made sure the pedal was up. I then bled it till the fluid filled the resivour, took a little out but left it a little over the line. Screwed the nipple up and its good as new
-
[ATTACH]81540[/ATTACH]
-
Yeah there is 3, where can I get new ones from ?
-
[ATTACH]81539[/ATTACH]
-
[ATTACH]81538[/ATTACH]
-
I will have a look as it has a upgraded wiring loom in it. The relays were covered up but what was covering them was damp so it cound be corrosion and probably cound probably do with testing
-
I have checked the fused inside the car, I'm sure full beam runs of the same as main so I don't think its the fuses, there's no fuses on the wiring loom itself as far as I'm aware. Me and electrics don't go 😂
-
My headlights wont work, side lights work, fogs work and full beam works but main beams doesnt. Ive tried a different switch but still the same problem. Ive noticed someone has put a aftermarket headlight loom in and it has 3 relays next to the battery. is this something i can just unplug or is it worth trying new relays, and help but be appreciated
-
Finally got round to starting a build thread :dance: So i picked up this little gem for 750 and it was only down the road from me 154k but has had 2 engine rebuilds 40mm lowering springs Full 2 inch stainless miltek exhaust system Momo steering wheel [ATTACH=CONFIG]81533[/ATTACH] [ATTACH=CONFIG]81534[/ATTACH] [ATTACH=CONFIG]81535[/ATTACH] First job was to get of the horrid 5 spoke wheel, so i managed to pick up some 9j borbets 9j all round with brand new goodyear tyres on [ATTACH=CONFIG]81521[/ATTACH] [ATTACH=CONFIG]81522[/ATTACH] [ATTACH=CONFIG]81523[/ATTACH] [ATTACH=CONFIG]81524[/ATTACH] [ATTACH=CONFIG]81525[/ATTACH] [ATTACH=CONFIG]81526[/ATTACH] [ATTACH=CONFIG]81527[/ATTACH] [ATTACH=CONFIG]81528[/ATTACH] [ATTACH=CONFIG]81529[/ATTACH] [ATTACH=CONFIG]81530[/ATTACH] [ATTACH=CONFIG]81531[/ATTACH] [ATTACH=CONFIG]81532[/ATTACH] One day whilst driving i noticed me left foot was rather wet, after further investigation it was the heater matrix, so managed to replace it within 2 days. Ive also had to replace the slave cylinder as that went pop. Went out for a little drive this afternoon [ATTACH=CONFIG]81520[/ATTACH] [ATTACH=CONFIG]81536[/ATTACH]
-
Hi there im george from chester. Bought my first corrado a couple of weeks back and im in love with it. I currently have a mk4 golf as a daily, ive owned a number of vw's in the past which has mostly been mk3 golfs. so its about time to start my build thread for it Looking forward to being on the site and getting to know people