George Lee

So I got the rear bumper all finished off and on the car. I worked on her most of Saturday night putting coilovers and wheels on hoping to drive her to ultimate dubs but I couldn't get it finished. Yesterday I got it all finished and this is how she's sitting now. Sent from my SM-G950F using Tapatalk

Rear bumper is nearly finished. Needs rubbing down and then laquer. Coilovers arrive tommorow, and picked these up tonight just g23 adaptors and new nankangs [emoji6] T5 banded steels. 7.5 front, and 8.5 rear Sent from my SM-G950F using Tapatalk

Removed the rear bumper tonight to remove all that flaking laquer and get a fresh coat or paint 🤙 Sent from my SM-G950F using Tapatalk

Couple of pictures from today's outing Sent from my SM-G950F using Tapatalk

Thanks dude [emoji106] first ever proper attempt of doing it myself. Just took my time and followed some videos Sent from my SM-G950F using Tapatalk

Cheers dude [emoji106] still needs some rubbing down yet. Also done that front corner of the bumper which has blended in nicely Sent from my SM-G950F using Tapatalk

Seeing as I was off today I thought I'd crack on with getting the corrado back together for it's MOT. And she passed with no advisories ! Absolutely made up and drives amazing [emoji3] Sent from my SM-G950F using Tapatalk

Cheers dude [emoji106] I was looking at them but wasn't sure whether you can take one off a car if it comes with one. I thought it might fail MOT if I took it off. If not then I may possible do it. Sent from my SM-G950F using Tapatalk

I'm a stainless steel pipe welder in the food and beverage industry. Wouldn't mind going into exhausts as a job on the side. Sent from my SM-G950F using Tapatalk

Managed to get the wing on this weekend and very happy with how it's turned out. Just needs to overspray taking off and the paint blending in. Next was the exhaust [emoji14] I had to get the grinder out to get the old one out as it wasn't coming apart. New one going on Also started on the painted, I used g3 scratch remover which removed the first layer and the difference was amazing. Picture doesn't really do it justice but the furthest part of the roof I had done and the closest wasn't done. It looks a lot better. Just needs a good polish now. Sent from my SM-G950F using Tapatalk

Havnt updated in while as work has been manic and has stopped me doing as much as I liked, would of liked it to be done now but she's getting there. So I got the wing of and bought a repair kit which had all the filler and ally mesh I need to do the repair. So I got cracking with the repair and have been doing little bits throughout the week. This is where it's at now. Looking a lot better, very happy with the result. All primered now ready to be flattend and then I can give it a top coat. And today this arrived ! Will be installing this and the new lambda sensor when the wing is finished and on. Sent from my SM-G950F using Tapatalk

Sent from my SM-G950F using Tapatalk

Bugger, I needed an late one but couldn't find anything so had to settle for an early one for now Sent from my SM-G950F using Tapatalk

Finally got round to finishing the inlet. I would love a polished one but I havnt got the patience to do all that sanding and polishing. So for now I painted it black with the red details. Nearly ready for mot. I'm working through the list to get it ready so then I can at least use it but also do bits to it at the same time. Next job was the rusty arch. The only really bad part on the car. Someyone had done a bad bodge job to pass the last mot so I wanted to take the wing off and do a decent repair. After a lot of shouting as the two 17mm bolts that hold the front bumper on wouldn't come out. I finally got it off I'm hoping I can do a decent repair and blend the paint in, if not I'll sand it all down and paint the entire panel. Sent from my SM-G950F using Tapatalk

I've just had problems with my abs. Check fuses are ok behind the glove box and test there getting power with s multimeter. Also test the relays. My problem was the ecu was water damaged so didn't work. But should be something minor if it was working before you took the dash out Sent from my SM-G950F using Tapatalk

After a new headlight or just the glass as mine has a hole in it. Noticed it yesterday, thought it was all ready for mot aswell [emoji58] Thanks Sent from my SM-G950F using Tapatalk

So tonight I cracked on with putting my new abs ecu in. I also got the relays, 79 and 179 just to make sure. After installing I started the car to see it had solved the problem. And..... the abs was fixed [emoji16] So I was onto the next job Looking back at the previous MOT's, the last 2 both had advisorys for a minor oil leak. After a quick look it was obvious it was just the rocker cover gasket. So started taking inlet off to get to it After removing the inlet i got the rocker off While there off I'm also going to give them a clean and possibly a lick of paint to tidy the engine up a little Sent from my SM-G950F using Tapatalk

How would I go about trying to blink test it ? Anyone done it before ? Sent from my SM-G950F using Tapatalk

Some pictures of the abs module I took out, deffinalty got water damage and looks bust to me. New one had arrived so install it tommorow and see what happens 🤞 hopefully fixed my problem. Sent from my SM-G950F using Tapatalk

Only thing which confuses me is if the abs is a certain teves, it says it's not compatible with data transfer only blink codes, so surely OBDeleven wouldn't work either ? So many different views and suggestions it's all confusing [emoji23] Sent from my SM-G950F using Tapatalk

Mines a 1992 2.0 16v Sent from my SM-G950F using Tapatalk

I've tried with an obd reader but apparently it won't read the corrados. As I have an obd reader and the app. Sent from my SM-G950F using Tapatalk

I've found that my ecu looks like it's had water damage so have a new one coming today. Ive read that vagcom will not read all corrados depending on what abs system you have. How can I found which system I have? Thanks Sent from my SM-G950F using Tapatalk

Will try that when the new module comes. Do you know anything about the relays ? They both have power and 79 was clicking on ignition. But 179 wasn't and that's power to the pump. Will it kick in over 15mph ? How do I test relays ? Thanks Sent from my SM-G950F using Tapatalk

Im not sure if the pump is at fault at the moment as the abs ecu has seen better days. This would cause it not to work surely Sent from my SM-G950F using Tapatalk