corradlo

Gents i have a set of 4 bbs rm/rs dishes, these came from a set of 15's i have split, so no longer needed, in great condition with no kerbing. All they need is a good clean and polish, i will do this before somebody buys them Im looking for £175 ono located 10mins from Heathrow collection is preferred if you need any more info or are interested, give me a call on 07900911190 Thanks ( hope ive done the add right this time lol!)

This can be done fairly easily. you could get some 4 x 100 to 5 x 100 pcd hub adaptors from ebay/g23 etc.... then use wobble bolts. or you could get g23 to make you custom adaptors that go from 4 x 100 to 5 x 98. either way it can be done!!

Hello gents, i know its a long shot, but im after a 7 slat badgeless spoonfed tuning grill, if anybody has one they would like to sell, im interested!! also looking for a 70mm spliter from spoonfed too. Ive had great luck with corrado forum and parts so far so hope somebody can help. Thanks

all sorted, thank you clumpy1 received the items, all bolts brackets etc....!!

Do you have any pics of these? do they look any better..

Ive only just discovered this, its such a cool idea...

its the actual hinges im interested in refinishing....

Gents Does anybody know if the bonnet hinges themselves can be stripped down, i would like to polish or powder coat mine and im not sure how to dismantle them. Thanks

As per title gents, I need 2 complete seatbelts including the mech etc..... Just the front 2. Thanks

Guys, what's the actual difference between scirocco bases and the stock corrado ones. My current ones are already height adjustabke , but do the scirocco ones go lower? If the Rocco ones go lower I want to use them to fit some aftermarket seats. Thanks in advance.

I'm in for a top tinted one of these.

Gents im still interested in this too, my screen is now out and i really would like to put one of these back in!

Thanks for the pics, the tank number one is very helpful, will definitely help with tracking one down...

sorry to hijack this thread, but im in the middle of rebuilding my rear calipers, I have them stripped etc... with new seals ready to go in after powder coating, however im a little stuck. How do you remove the handbrake mech bracket? its the one attached with a 13mm nut. I have managed to remove the other bracket, but this spring loaded one does not come off, even with the bolt removed. It does move and the handbrake assembly does work though. Thanks again

I checked with a dealer today and it looks like to tank is not available anymore :(, does anybody have one that is off a car already, with or with out the pump? or could somebody post any pics of what the large fuel pump looks like inside the boot floor, to help with my search!! Thanks gents

So there were some g60's which had a 55ltr tank with a single pump?! that would be perfect, i will call my local vw dealer to check and see. failing that i guess i will have to source one second hand! some great info there david.

Will a 2.0 8v tank and pump fit? i will fit whichever tank mates up to one of the single pumps. The car is a bare shell at the moment, with only my existing tank on there, so access to change is easy, hoping i can come up with a solution before i start to re assemble the rest of the car!

Thanks for the quick replies guys, so just to clarify, a vr6 tank will not fit the early body. I was under the assumption that the single pump tanks had a larger opening for the pump itself. Anyone know if it's possible to use any mk3 bits to convert my car to a single pump?

Gents, I know this has been asked a few times and i have looked at some posts in relation to this, but im not clear on the answer. Basically im building a throttle bodied abf, and im on a mission to clean and rebuild the fuel system, so i would like to use just the in tank pump from a vr. This is so it is a simpler system, and i can easily access it from within the car if need be. will a vr6 tank actually fit my early 16v body. I would like to get a complete setup from a vr, so just need to know if the tank will physically fit. Thanks in advance.

Gents i'm inviting all Corrado owners to our annual VAG car event at chalfont st peter cricket club. Its our 6th year now, we always have a great turn out, however being a corrado owner, im always outnumbered by tons of mk1's, mk2's etc....lol Our show is titled westside treffen this year, because we want to bring the euro show vibe we experience at worthesee & mivw to name a few back over to the uk... Its a great family day out so im hoping loads of you can join us this year and represent the corrado!! (details below)

Now sold

As the description gents, I'm after a good non adjustable column, and I am converting to a manual rack so also looking for a universal joint from a manual rack mk2 !!!! Column not needed, i managed to find a new one! still looking for a mk2 u joint please Thanks again

Gents, I'm after a lower subframe brace, the one that attaches to the 2 wishbone bolts, however I can only find ones listed for corrado from 91 onwards. I have a 1990 early car with early subframe , does nobody know if these will fit. Awesome have one listed Thanks in advance

Bump for this, i dont need a g60 box for the moment, so looking for a straight sale. thanks

Sold!