Jump to content

lilfuzzer

Legacy Donators
  • Content Count

    5,967
  • Joined

  • Last visited

  • Days Won

    2

Everything posted by lilfuzzer

  1. Ah right Dan. Thing is if I cut it and you dont want it then its useless for me and have ruined the full sill. Give it a little while and if no one else sorts you I'll cut it and see what its like. ok?
  2. Defo good mod just done this on the blackberry took 20 mins max
  3. needs to be in the wanted area chief but may have one will have a look
  4. hi bud I have the sill bit you want would want the whole sill gone as no good if just that has gone would you pick up or is it defo cut out and send to you? pics for you
  5. Mate uif your still looking for an engine mine is coming out this weekend if you want it? obviously close for pick up
  6. Hi bud had a chance to have a look today I have found them you can have them for 20 posted if you want them 1 have some electrians tape on so may have been repaired have not took it off to have a look. I took them of the working fog i had to make air ducts
  7. So they different then just checked mine and its 1HO 907 379C so prob no good
  8. HI all sorry if this has been covered before but tried a search for almost an hour now and no results The blackberry went for its MOT on saturday failed on a few things so left at my mates garage. Picked it up this morning and driving home the rear lights and rear indicators arent working. Checked all the fuses all fine. Have started to unpick the dash, but thought check the reverse light to eliminate the wiring at the back of the car. That works fine. does the rear lights work on a relay that may be faulty? Also had some smoke coming from the space where the radio should be at first put that down to the headlight switch. But maybe be the blower motor as it had stud for quite sometime before I picked it up and thats the furthest its been to the garage and back 1.5miles each way. Going to continue to dismantle the dash to check the wiring out of precaution but any ideas would be helpful thanks as was to start driving this one instead of the sherry next week :(
  9. Actually thinking about it they should be avaiable from end of next week all going well. Then all you have to buy is pads and discs
  10. Will have a set of vr carriers and calipers soon if you can hang on a few weeks?
  11. HI bud its next to the left foot of the passenger is the easiest way to explain it just infront of the door behind the panel held on by 2 screws
  12. Yeah that was me in the sherry mate. Saw you from afar and thought I'd start flashing early enough for a change:) Newbridgejob has one the same colour as my bordeaux lives near me you maybe your mate seen him. Round mine there is a few very close as my mate has a green storm literally 100 yards away
  13. HI Pete I think I have a pair of what you are after can it wait till the weekend to get pics as will take a while to find them?
  14. Hi I have both sills cut outin north east if ny good Not trying to shark martin
  15. Its of another bordeaux rolling shell I had bought for the engine it was a 93 VR6 if remember correctly. I can get you the part number if you want it as its just in the loft. The list is the current list of cars as stupidly have 3 VR6s one will be going soon though and more tan likely the sherry as the blackberry is looking to good to break.
  16. Hi Martin you could be struggling for a cheaper one that is uncraked etc for less as sold one recently for £45 Male some air ducts instead with the knackered one
  17. Have a abs ecu thingy for sale if you want it bud
  18. Oh yeah forgot about the plastic cover too should have thought of that as tried to fit a coilpack one to the dizzy engine yesterday and didint fit. I think I'd forget me head if it wasnt screwed on.
  19. Hi Ben may have a coilpack engine complete coming very soon if you havent already got the block. I also have a 2.9 wiring loom freshly wrapped that I fiited by mistake to my dizzy engine till I realised and had to get hold of the right loom. People may correct me but you'll need the upper chain plate from a coilpack head, wiring loom, ecu (think the MAF is different someone will correct me if not) not sure what else but its something to start with
  20. Found that out on a golf when repairing the handle and the window ame down and nearly took my hand off!!!
  21. is pretty strange going from a vr to a 16v if chopping and changing
×
×
  • Create New...