Waz

hi all there is only one side of my spoiler that works the other side i am able to lift by hand :? any one any got any suggestions cheers!!!

yes bobby borbet A sport thay are 7.5 front and rear on mine i got them in et35 front and et20 rear he sayes the et35 wont go on the front of valver or the g60 but they do fit a valver with standard size discs and pads but the et35 wont go on a g60 but i wish i got the 35s all round.the delivery only look a couple of days very very fast delivery and the wheels are stunning they will really compliment the car once i get it slammed on coilovers :D

i got a brand new set of 16" A's from the german ebay for 415 quid delivered

if got borbet A sports on my valver they are 16"x 8" the front is et35 and the rears are et20 there is loads of room at the front but i cant increase my break size as the valver ones are so close to the inside of the wheel and the rears touch the arches but only slightly and only on one side i could have done with a slightly higher et on the rear i thought about getting about 5mm skimmed from the locating face but dont know if this can be done or just get coilovers:-)

does it have a cat on it my m8 had a mk5 rs2000 and his car just lost all its power and ran crap he couldnt even pull away was very confusing then all this black smoke ( well it was more like suit ) exploded from his exhaust then the car run great on later inspection it turned out the cat had started breaking away inside and blocked its self.it could be an other thing to check good lick any way

i just think they look better than the stock valver one m8

does any body have a 3 spoke vr6 steering wheel they can sell me thats if it will fit on my valver cheers

mines is currantly doing the same the are 50 quid from vag give or take a few quid. so if any body has one going spare give me a shout cheers

could it not be a recircutating pressure valve ( i think thats what you call them ) its the same sort of thing as a dunp valve but for super chargers its just a guess though

i had the same problem with mine when i replaced the matrix i done the same as you and put two copper pipes in place of the valves iv had my corrado for about 5-6 years now and havent had any problems with this and the heaters are great

hi all my 1.8 16v is starting to get a little past it 247.000 miles give or take and was wondering if it would be worth my while putting in a 2.0 16v with the 1.8 valver cams all coments welcome.CHEERS :D

thanks for the replys guys the info is very much appreciated :cheers:

i thought about getting some coilovers but imnot sure i might see if some metal can be skimmed from the back of the wheel perhaps 5-10mm.there is only a little lip left on the arch a couple of mm at most but its just the one side that is catching :bad-words:

et15 :shocked!: that must be a tight squeez iv got et20s on the back i even thought of getting a little skimmed of the back to make them sit in a wee bit more but i dont know if that would be possible what do you think :)

hi i just fitted my new wheels to my raddo yesterday and have noticed that the passabger side rear sticks out further than the drivers side :? cousing it to rub the arch when hitting a dip in the road or when some one is in the back of the car.i was wondering if the rear axle is adjustable from side to side if not is there any thing i can do any help would be great CHEERS :roll:

Hi i recently asked for your opinion about a set of borbet A sports size 7.5 x 16 et35 i currantly have 7.5 x 17 et35 and they seem to fit without any real problems they just rub the chassie legs a little on full lock. the borbets i am after are also available with an offset 20. theseller recomended the et20 wheels as the et35s wouldnt fit his corrado g60 because the breaks are to big and sayes they would be the same for my 16v corrado.i thought that the et20s would have sat out to far for the arches! would the et35s not be better and perhaps use some spacers.PLEASE HELP I REALLY NEED NEW WHEELS I MISS DRIVING MY CORRADO.ANY HELP WOULD BE VERY VERY MUCH APPRECIATED! THANKS :?

they would be going on a valver i thought about putting 195/45/16 tyres on would this help in the fitting department eg reduce the chance of rubbing. cheers for all the feedback i appreciate all the help thanks to all

hi all im sonsidering a set of 7.5x16" borbet A sport wheels et 35 and was wondering it they would fit the corrado with out any problems.can any one tell me the offset for a corrado thanks. :)

NJK plugs are what vw sell for the rados but go to a motor factor save your self some cash

hi all just wondered iv any 1 could help the battery light on my 1.8 16v rado is constantly on. when the engine revs to 3000rpm the light is almost completly off until abt 3500rpm then it gets bright again.i have changed the brushes for new ones but still no change any help would be great thanks :)

just wondered if they fit corrados ok or are they the wrong offset cheers

cheers jay i will have a go and see how i get on, by the your c' is stunning m8 :notworthy:

to me it looks like its got a swollen forehaed

thats the same damage that was done to mine when it went for its mot FOOKERS!!!!! :bad-words: :bad-words: :bad-words: :bad-words: :bad-words: now i have the later style bonnet :cry: :cry: :cry:

Waz, if it doesn't fit properly along the tops of the wings, it's not been lined up properly when it was fitted. i had a good look at it yesterday and have noticed that the bonnet as lower than the wings at the back but ok at the front could it be that the late style wings are slightly lower at the back compared to the earlyer 1s when i phoned the body shop that fitted it they told me it couldnt be adjusted in hight :?