Jump to content


  • Content Count

  • Joined

Everything posted by WONGA

  1. Ah I see, silly me I read it wrong I thought u were the seller lol
  2. Ok cool if he doesn't I will defo have it, can u post it?
  3. Can I have it please, I'm desperate for one exactly like this
  4. Can I have it please, I'm desperate for one exactly like this
  5. Great guys would u be willing to sell and post, what type of spoiler is it, I don't like the one that goes up in the middle
  6. Hi guys I'm after an eyebrow spoiler or one of the ones with a built in grill and also a bonnet cable by any chance Cheers steve
  7. Took my charger off for service Got my charger back Had to fit all of this
  8. Hi dave do you still sell the door handle repair kits?

  9. I'm looking for an eyebrow spoiler and debadged grill if anyone has them for sale
  10. This week I had to remove my Charger for a service and the only guide I could find online was the Matey Matey on, which was very informative but not enough pictures as I find it easier to to understand than a load of paragraphs So I thought why not make my own guide for future reference and for other people to benefit from Right so I started off Pop open the bonnet and remove the drivers side Headlight and front grill Next remove the airbox/airfilter inlet pipe by 2x hex boltstop and bottom Next remove the radiator cover Next remove the 4 hex bolts on the side of the charger, theyre what hold the charger in the bracket Next remove the black plastic cover that sits on top of the charger by these 2 bolts Then on the right hand side of the charger there is a black plastic box ( the silencer box ), undo the jubilee clips and pull off the intercooler pipe Just underneath the black box you will see an oil feed cable, should be a silver braided hose , undo this and place up by the oil cap so I doesn't drip oil anywhere, there is also another oil feed pipe on the bottom of the charger on the side where the airbox was Unfortunately I didn't take any pics when I undid these but you can clearly see them Next to do is loosen and remove the tensioner bolt, and I tapped it off with a rubber mallet Then slip the belt off the charger pulley Next remove this pipe from the charger, its quite stiff so give it a good wiggle and a pull, I slipped a very small flathead screwdriver in and lightly levered it out Next remove the oil dipstick and then the 4 bolts holding the black silencer box together, I found this quite difficult as the bottom 2 bolts wernt easy to get to, make sure you get a spanner on there good and firm and don't round the bolts off, just slowly crack the bolts Next split the black box Remove the one half of the black box out of the bay and then remove this bolt holding the other half in Then you can access the last 2 hex bolts holding the charger in on the bracket Then remove the last bolt on the charger support bracket, watch the metal 3 holed bracket doesn't fall down Then I used a crowbar to slowly loosen the charger from the bracket, then with a bit of a wiggle the charger should lift out Now theres a big empty gap where your charger used to be, get the Gunk out and start scrubbing Then send your charger off to Matt at OCD for an overhaul and service And there you have it, I hope this helps people out in the future...Good Luck Steve
  11. Plenty of Parts still available SOLD: 90mm splitter Headlights Grill Fogs and Indicators Front seat handles Lower airbox Pedal box, MC and SC Gearshifter interior door handle surrounds
  12. Hi did you get these made and how much is the kit?
  13. Lesta I have inboxed you Jamie I'm keeping the bonnet and front bumper for my own corrado, the wings have small rust bubbles
  14. Yes I can do that Easypops, inbox me
  15. Price list: 90mm Splitter, does have a small split in the corner £40 inc p&p Headlights £40 inc p&p Fogs and Indicators , there are a few hairline cracks in one indicator but still in good working order £40 inc p&p Front grill with badge and 16v badge £15 inc p&p "CORRADO" and 16v rear badge £12 inc p&p Boot load liner piece £10 inc p&p Various dash parts and switches available, dont know what to price them at just comment or inbox me what u need and i can sort out a deal for you Body parts and windows available to , basically everything u see is for sale All items will be sent via City Link and packaged well Thanks for looking Steve
  16. Hi guys here we have a Corrado 1.8 16v for breaking, plenty of parts available and at very good prices
  17. Thanks guys, yeah i plan on keeping it for a while, ive just bought another Corrado for spares and am going to break it to fund my G60, keeping it standard defo, just gonna change the wheels ive donated to the club, does anyone know when i can post in classifieds?
  18. Hi guys I have just purchased a Corrado G60, 112,000 miles, tax and tested till next April 2015, for the grand sum of £800 It does have a few minor problems that need addressing, llike bodywork as there is laquer peel on both doors and bonnet and bumper have stone chips and paint flaking off, but have a sprayer friend who can sort it, I have another set of wheels to go as tose horrid ones have to go I plan on sending the charger to OCD to get serviced as there is no history of it What u think
  19. WONGA

    1.8 16v

    Hi there I have a pair for sale for £30 plus postage if your interested?
  20. yeh which wire from the stereo goes to the red and which to the yellow.I want it to be on permanent and ignition.(i mean when the key goes in) I know that vw's are differnent to wire up than other cars but dont know how?
  • Create New...