will 2
-
Content Count
209 -
Joined
-
Last visited
Everything posted by will 2
-
Hi Si the ones i bought are the 1613mm ones , not got under the car to check exactly but they look ok, so far
-
coming along slowly
-
Feels very strong as I had to file it flat and drill out the hole to make it round
-
hi all , just in case any of you need to do a repair on your swirl pot or any plastic part that needs fixing before after this is what i used
-
going to put a post up in a bit of the repair i done on the swirl pot in the drivetrain section
-
hi Si just to say i recived all the parts thanks, managed to buy a length of pipe same dimensions from b&q just got to cut it down to the size of the OE ones.
-
Thanks again.
-
PM sent mate
-
hi thanks for finding them, yes i'll have all those off you, shame about the sleeves though. pm me your paypal details and i will sort that out for you
-
hi , if you have the speed clips i mite be able to salvage my rubbers, thanks
-
looking for a set of these if any one has any , must be good condition thanks
-
got koni's on with h&r 40mm lower springs but one spring snapped so thought i would give coilovers a go
-
i need to buy a set but i dont want the cheap ebay stuff and cant afford the high end ones, i have seen 2 sets that are in my price range the first are https://www.venommotorsport.com/partcode/GF80-005/ 2nd are https://gazcoilovers.com/vw-corrado-gaz-coilover-suspension-kit---gha-1494-p.asp which ones would you recommend ,also im not looking for a hard ride but a comfortable one that will handle the odd abuse
-
hi , yes lift pump in the tank, with the main underneath, whats your thought on the accumulator
-
looking for a fuel pump to fit my 2.0 16v and the price ranges are vast, from about £35 upto way over £200 for a bosch , what make would you guys recommend or actually use. and also the same question for the accumulator, part numbers if poss if you can. thanks
-
no, thought it mite have been an easy fix as the car has been stood for 6 years with the back end up on stands , was hoping it was just stuck,
-
hi all, got a bit of a problem with my in tank sender / pump unit , basically i think its shot!! , question is can i get a replacement or parts to fix it , i cant find a part number anywhere on it and have searched the web but not getting much joy, any info would be great or if someone has one for sale. my car is a 94 16v 2.0 here as some photos of the offending part
-
cheers mate , found it after i wrote the post out
-
going have to give them a call as mine on the car are looking a bit crusty, and i know if i start to rub them down im going to end up with pin holes every where.
-
thanks for that , did you have to send yours in for them to copy
-
hi mate got to get a set of these , can i be cheeky and as you what they cost thanks
-
my cables are nearly off the car so when these turn up i will see how they match up to the OE ones
-
subscribed to the forum now as not been on for a while , and i still cant open/see photos
-
https://www.gsfcarparts.com/731vg0290 i just ordered these hope they the right ones
-
think the length i need is 1613mm