Jump to content

vagingit.co.uk

Members
  • Content Count

    204
  • Joined

Everything posted by vagingit.co.uk

  1. 90 mm or 50mm? I have an almost brand new 50 mm splitter for sale if interested?
  2. I have my Corrado for sale It is an early spec 1.8 16v model in a rare dark metallic green. Overall the car cleans up well, but is not without issues affecting most 25 year old cars. Rust has bubbled up along the leading edge of the passenger wing, but this is easily salvageable, A little bubbling around the filler cap, but again, still solid, and a few other rust bubbles and scratches. I ave fully detailed the car as its my hobby, and the paintwork has come up lovely. The engine although high mileage, runs fine. Uses no oil or water, and revs up nice and freely. I serviced it and fitted a new lift and under car fuel pump when they died. There is a full stainless exhaust mated to a stainless manifold which sounds lovely without being loud or boomy. Budget coilovers are fitted, and they are all greased up and adjust easily. The interior is in nice condition with no rips or damage, although the drvers footpad is a little worn. All electrics work, spoiler goes up on the button and at speed, and the sunroof tilts and slides The car come with 11 months MOT Bad bits: Afformentioned rust The front bumper could do with repainting The exhaust manifold vibrates when pulling away, it either needs adjusting, or maybe a solid engine mount fitting A boot strut has sheared off meaning that the boot doesnt stay up on its own Horn currently does not work I am based in South East Kent, andwould like £950 for the car, and am ofcoure open to negotiation. lease pm or text me as I work nights 07958542736
  3. Cheers for the comments Dan I wil listen to offers as I have removed it from the car now
  4. Pics as requested. I am in South East Kent, but am happy to wrap these up for a courier
  5. Pics up later today when the rain stops! Summer! They went straight on without the need for spacers
  6. I will get pics up tomorrow once removed from the car. Due to raising some funds for my up and coming holiday, the Borbets are up for sale. The front 2 are 7.5" wide with almost brand new budget tyres The rears are 9" wide with one toyo and one federal tyre. Both have a few mm of tread, but the federal has some chunks missing from some arch rubbing on the way back from Gti International They all had a home refurb and were painted in anthracite grey. This is far from perfect, but they look presentable. No kerbing on them, and they have the flat Borbe centre caps I would like £350 for them
  7. I have a few bits for sale A genuine 90mm splitter. Quite a large crack on one corner, but could be glued or tied together - £25 plus postage Main charger bracket for a G60 - £20 plus postage G60 Giro valve from Jabbasport. This is used to overcome lost boost as it vents back through the ISV (I think) Bought from Jabba years ago and never used - £20 plus postage Please pm or text as I work night Simon: 07958542736
  8. Any interest? I can have this couriered if that helps? I would also be interested in some 4x100 alloys and tyres in swaps
  9. Bump to the top guys £175. Good to know what they are from, thanks Kadvr6
  10. Open to offers guys. I have just realized that the drivers seat has adjustable back lumbar support too.
  11. I have no idea what they came out of originally
  12. Location: South East Kent Please pm or text as I work nights. Simon: 07958542736 I have for sale my red leather Recaro interior. They are non VW seats, but are genuine Recaros as the stamps under the seats show. I do not know what they are out of originally as I bought then from Twin45 on here. They are attached via cut down mk2 golf subframes, thus have no height adjustability. They do slide backwards and forwards fine, but have no tilt function. As you can see, there is wear to them, and they have obviously been dyed red, as could do with a re-dye in places. They are very comfy, and I have just driven the car to Gti International and back, a trip of 400 miles with no back ache etc Pictures: I would like £250 which is what I paid, but would consider a part exchange with a nice cloth interior. Any questions, or you would like to have a look, then please do. I would be willing to send them via a courier if you would like to organise that.
  13. A set of Borbet A's with tyres, two almost new Staggered fitment, two 7.5x16" and two 9x16" Home refurb in dark grey. Straight and true with all four centre caps £365 plus postage
  14. Ive just had a 4 branch stainless manifold fitted to my kr 16v Corrado The problem is, when I turn, its hitting something and sending horrendous vibrations through the whole car. I assume its the steeribg rsckis coming into contact with Any ideas for adjusting it guys? Can I raise the rear of the engine at all? Thanks
  15. Ok, I havent really kept this up to date. The car has changed a lot since the last pics were taken: New coilovers fitted as the old ones were seized. New wheels: Borbet A's in 7.5 and 9x16 New seats from Steve (twin45): Red leather Recaros And a brand new genuine 50mm front spoiler as I struggled with my driveway I have a full stainless exhaust and stainless manifold to fit now too
  16. Here are the close ups of each wheel and tyre
  17. I have just removed a wheel to look for the ET number. There is nothing on the back that says ET. but there is E, so i assume the ET is 21. On the wheel states E 21
  18. If you'll post them, I'll take all the switches please?
×
×
  • Create New...