
Dude VR6
Legacy Donators-
Content Count
1,081 -
Joined
Everything posted by Dude VR6
-
http://www.lamin-x.co.uk/ Check this place out
-
Wendy Your not thinking of turning to the dark side ?
-
Sweet Glad you had a good time and your RADDA looks fantastic. Wish I could have gone and done this but I had to work(start to rebuild Sutil`s car after his off on Sunday) :( Oh well HO HUM and lifes a Bitch
-
I want that power in my RADDA :grin:
-
I like this very much, the yellow lights and bib finish it off nicey :D
-
Its not the first time these 2 copanys have been linked together, Porsche have only been an independant company for 50 odd years, before that Porsche used to work for VW.
-
Who sells and ships (overseas) KW's in the UK?
Dude VR6 replied to Mawrick's topic in Suppliers Forum
He`s flying over to here then taking his bike back over to Norway -
Who sells and ships (overseas) KW's in the UK?
Dude VR6 replied to Mawrick's topic in Suppliers Forum
Hi I have a mate that also lives in Norway(Drammen) Who is coming over at the end of May. I could have a word with him if you want to save yourself the hassle of oversea`s postage, and get him to bring them back to Norway for you. -
Buy another cheap car for this purpose, Corrado`s SHOULD NOT have towbar`s.
-
Changed the rear number plate surround, and fitted new pressed plates :D
-
I like it, you get to race the Police and not get busted for it. Where do I sign up ? :lol:
-
Nice car and colour, and the wheels look good tooooooooooooo :)
-
I had this problem on my old ROCKET, and again put a new wheel bearing on it. And again the hub nut came loose again. So IO took it in to a local garage, and they said that the hub had worn dew to the wheel bearing problem. So had a new outer hub and wheel bearing, all sorted and it never happened again :)
-
What are your plans for this bank holiday weekend
Dude VR6 replied to WigsVR6's topic in General Car Chat
I`ve been shafted, got to work Saturday & Monday :mad2: :censored: -
Yeti don`t give up yet, if you need a hand, or anything give me a shout
-
I would stick with the Sony myself, but thats me :)
-
Very nice RADDA mate :D The wheels look like something that I had on the car before I brought it, which were Fox Racing wheels. Wish I still had them on mine as they look nice on a dark car. :(
-
I fitted a Pipercross induction kit that I brought for £20, Just come back from giving it a thrash. Sounds GREAT, still need to tidy up the bracket/fittings but its made me SMILE :D
-
As I found out with mine, the stat was jammed shut, so it did pressurise the system as it would boil up creating bubbles, pressurising the system.
-
I never had a problem bleeding mine, probably because I only changed the stat & housing and didn`t lose to much fluid
-
just filled the system, and run it up, kept topping it up till it was to the level
-
I did the same mate, the cooling system is a self bleeding system and you shouldn`t have problems purging it, but if it pressuring the system, I would check the stat before you go any further. You may get it to hot and warp the head.
-
I`d check your thermosat as well, I had this problem with a burst matrix and it was down to a jammed closed thermosat. Which resulted in the engine getting to hot and pressurising the cooling system, and finding the weakest point to blow.
-
Iheard the scrap yards a good place to look :epicfail:
-
You don`t have to remove your front bumper, there are 2 screws/bolts on the the top of the slam panal & a screw on the back of the headlight unit which you can access through a hole on the slam panal.Take these out and pull the light unit out, easy