eddy.h
-
Content Count
395 -
Joined
Everything posted by eddy.h
-
a picture of the flange2004294312398080_1.jpg[/attachment:8ztbge7x] :grin:
-
i have a throttle switch in good con £30 posted
-
have been looking for a g60 charger inlet flange there's one on ebay has neone seen these for sale elsewhere i did see one no ebay ( had no money at the time ) he sad he was doing them on e38 but can't find
-
× 4 for me please :grin:
-
thanks very much veedubbed & hope you feel better soon i was going to bi sum of the parts new so you have help me her :thumbleft: am i write in saying the mk3 golf vr6 wheel bearing housing + hub the same as the rado vr6 i can get them with 288mm brakes . i was thinking of beetle steel wheels for now 16" i think
-
anebody?
-
bar-tek do a 250kpa map sensor you will need a new chip for that
-
hi all i wood like to go 312mm ( may go 288mm first ) front brakes on my g60 but dont won't to do re-dilled disc or machined caliper carrier if i got the following parts wood they fit to the g60 subframe or wood i need the vr6 subframe aswill vr6 parts wishbones balljoints tie rods + ends arb links + arb wheel bearing housings + hubs driveshafts 5 × 100 wheels thanks inadvance eddy :D
-
i didn't check that
-
ive had no problems with my headlight loom i get 13.3 v ( engine runing ) at the bulbs the difference between before & after is very good think i will add the eath returns to the battery :salute:
-
yeah 1 relay for dipped & 1 for mian beam/spots i wood have a look no http://www.matey-matey.com/uprated_head ... ring.shtml
-
thanks very much 4 the link now i'm not sure what to do :scratch:
-
thanks buddy :D
-
The lower ball joint on the VR is offset forwards or backwards can't remember which way, the 4 studs are centrally placed. Sorry im not picking faults just curious, but cant you just fit vr lower ball joint with the vr knuckle? You would have to change the wishbones then you would need to change the ARB and drive shafts. if i got wishbones arb dive shafts wheel bearing housing bits & bobs of a vr wood it fit a g60 subfame & work say wave 312 tt brakes
-
vr6 plug lead removal tools for sale (metal type)
eddy.h replied to zerocool's topic in Suppliers Forum
can i order 1 ply ( i have paypal ) -
The Passat VR disc mounting face is offset from the Corrado VR by about 10mm. It has the same offset as the 4 studs (non-plus suspension set-up). This is the reason you can't use 288 discs on a 4 stud. thanks 4 that now i no i don't need to do this conversion
-
how is the corrado vr disc different to the passat vr ( 280 ) wood like to go 288mm or biger good work btw
-
had a look at my exhaust yesterday refitted the back box moor room between the pipe & rear beam no knocking :grin: :grin: :grin: happy new year :D
-
re-fitted the cover on top off the radiator clips ×2 v811 807 577c screws x2 vn 013 938 3 screws x1 vn 013 975 202.8l 24v Climatronic system.pdfPhoto0004.jpg[/attachment:2cr19mo6]Photo0005.jpg[/attachment:2cr19mo6] :D :D
-
have never had a problem weave my G60 have change a lot of part bout now my spoiler has stopped working go up bout not down then the fuse gos :(
-
very nice
-
Photo0104.jpg[/attachment:a6p62h2o] need moor black :grin:
-
i did all that the centre box is as close to the axle as i could get it had to weld the centre box to the de cat pipe to stop it twisting ( sh#t exhaust clips ) it was ok & then the coilovers want on now it knocks over every speed bump :censored:
-
www.jbsautodesigns.co.uk they do super-pro bushes www.venommotorsport.com www.vwspares.co.uk BTW hi :wave:
-
my magnex knocks over every speed bump :(