Swompy

Just a quick quetion. Are the little plastic plate type things ( sorry cant think of a better way to describe them) that go in the corners of the splitter needed. Mainly due to my new ride hight ( will be raising it a bit to get into my garage when I move out 8) )they have broken and keep hanging loose and scrapping on the floor, so was wondering if there will be any ill effects if I remove them? Ta

Got to love to Rota cups :luvlove:

Looking good, got to love the deep dish :luvlove: Are the ATS or Rota cups?

Haha I do love raining blood tho 8) Ya Pantera are good also I love Sepultura

WHA?!! I've seen them 3 times and every time they were AMAZING!! Mastodon/Mammoth ... Although Mastodon have done a piss take metal songs, its brilliant ... Cut You Up With a Linoleum Knife ... http://www.youtube.com/watch?v=9Vf3VzVbrXU Dont get me wrong they were good but nothing special, bit to old school for my liking

I spotted yours, The_dudes, OSV, crazydave'd daily, nemesis360 and -=Kris=-s wow yellow is all I can say to that :grin: 8) I'm sure they've found a way to breed them! :tongue: Well he isnt called crazydave for no reason :lol:

I spotted yours, The_dudes, OSV, crazydave'd daily, nemesis360 and -=Kris=-s wow yellow is all I can say to that :grin: 8)

Masterdon are good saw them with hatebreed, slayer and slipknot which was an amazing night., slayer were nothing special tho

*I've removed the imagaes as I dont want people copying it ( as non-forum members could see it) 8) :lol: *

I havnt done anything yet but will get somthing drawn up tomorow once I've had a good look at where i want it and how i will fix it to the car

I have the bench rear seat so no hump or bit inbetween the head rests to put it in. It has got a bracket on it but Im looking to get something made which will attach to the brack then to the bottom of the seat so i dont have to drill any holes in the floor and easy to get to. Ok but i think It might consist of a flat bars bolted together. I will draw somthing up and see if you can help me out.

Is there any one on the forum who can make me a bracket for me to fix a fire extinguishers to the passengers foot well. If I was to draw something up for you ( measurements and all) would there be any one able to make it for me? Thanks

So what clay bar would people reconmend Im thinking of getting the auto glym one but would any one sudjest any other kits

These cars are worst than women with taking your money. I'm all ready looking for a P+P head and 4 branch manifold :ignore: 8)

All the belts are about a year old so cant be due to that. Will have to investigate it at some point

No it wont, all ready looking at a flowed head 8) after being burned by a vauxhall vectra on the way home :( :epicfail: Got him off the lights and all the way up and till I got to the end of 3rd gear :( ( he did have loads of blue/black smoke coming out the back tho :twisted: :lol: ) I need more POWER No I dont want a VR just yet 8)

i found that the bottom wheels had eaten away at the cam cover and it was making some awful noises when i put them back on again, had to get a new one! i thought the noises where coming from a pulley wheel or tentioner but after greasing and fiddling i figured it had to be the chain, its hard to tell over the engine noise but it gets louder with increased rpm, kinda sounds like a super charger ( not that im proud of it 8) ) Must be a different whinning then as the noise I get you can only hear it at really low revs or at idle. and is deffo the belts, might try the talcum powder technique to see if that helps tomorow

No not from the chains But I have got a whining coming from one of the belts cant seam to work out which one or how to stop it

I've just had a KR inlet cam put in mine along with a few degrees of ignition timing and feuling adjustments and tbh it doesnt fill that different. But it does pull through the revs alot smoother and even more so at the top end. The only big thing I have noticed is it picks up alot quicker whilst in gear. Price wise I paid £211 for the above plus new chains and fitting a new inlet manifold. (at DG Autotech) And Dave Could I have a ride in your valver too please 8)

Ooops forgot to say it had new chains as well 8)

Well the KR and 9a exhuast cams are preaty much the same and I have a KR inlet cam in now so that shouldnt be a problem.

Thanks guys Some how I dont think I will ever get it as clean as yours but there is no harm in trying :D

That sounds cheaper than what I was thinking about 8) :lol:

Thanks Andy :D I might have to do that at some point but the rest of the block is looking really dirty now :(

*sorry if this is a wrong place to post, mods feel ree to move if not* http://cgi.ebay.co.uk/Vw-16v-Gas-flowed-Cylinder-head-golf-mk2-mk3-Kr-ABF_W0QQitemZ250601046827QQcmdZViewItemQQptZUK_CarsParts_Vehicles_CarParts_SM?hash=item3a58fc832b just wondering what you think of this and would it fit a 9a. Also would the head work fine if I swaped everything els over from my head into this one? (as it doent have anything but the valves)