Jump to content

Adam Darby

Members
  • Content Count

    291
  • Joined

Everything posted by Adam Darby

  1. yeh its easy like flusted say about 30 40 mins
  2. are you 100% sure before you start taking the head off. whats gone wrong
  3. Adam Darby

    50mm inlet

    i would get both might be a little better but the holes wont line up and it will disturb air flow
  4. ok ill have a look can you describe it i little bit more if you can cheers
  5. ive got the clocks out but cant see any obvious looking buzzers any one know what it looks like
  6. hi does any body know where the buzzer is located cheers
  7. ive taken my speedo cable out once before and it came out without a problem. but this time i cannot get it out to save my life the car is a 16v any advise would be great cheers.
  8. does that mean i will need to fit the lambda probe in the exhaust somewhere, does it matter that my car does not have a cat
  9. hopelfully got a Loom now off Rob_B (next week) what sensors do i need to get ( part numbers please) will they be cheap enough to buy new. cheers
  10. do you have to madifi the loom at all or is it a straight fit
  11. lol what do you mean then injector harness? and by the way if anybody has any of the parts i need please PM me with details cheers
  12. so am i right in saying that the G60 ECU plugs into the dizzy on the 16v do the extra sensors that i will have to put in wire up to the ECU as well
  13. the only bit i am gonna struggle with is the wireing but should be able to get enough info to get me through it.
  14. sopke to some one a min ago i need to swap the water temp housing but he is not sure what car its off anybody know. so know its BBM fuel rail ($139) G60 throttle body G60 ECU, LOOM 504cc injectors or standard ones SNS chip (dont no what stage yet) Sensors? (Water temp housing and an air temp or presuure) blue temp switch, co-pot, o2 probe. throttle switches full and idle. knock sensor he didnt say out about these Ill look into it and look for prices yeh ill have to have a look at your car if you dont mind
  15. just got a small wiring diagram of VW vortex. any body got a good one for me cheers
  16. well sofar my list is mk3 16v inlet manifold G60 throttle body G60 ECU, LOOM 504cc injectors SNS chip (dont no what stage yet) Sensors? (dont know what sensors yet) anything else lol Cheers for the help by the way
  17. if i Got a MK3 16v inlet manifold would the 504cc injector's you mentioned fit. and is DIGI 1 from a G60
  18. ok wel DIGI 1 sound's the best option for me what would a need to source for that.
  19. i get lost on that site everything is too technical lol. Basically i am trying to find out all the parts i would need to get hold of and all the parts i would have to order from mega squirt. im trying to post on the mega squirt form but ive not been activated yet
  20. well i want to know what injector's to use ive read that you can use a 16v mk3 golf inletmanifold then use G60 injector's (i think it said grey top) is that right. I would like to keep the dizzy so how would i do that.
  21. Adam Darby

    megasquirt

    hi all if was to change me corrado 16vT over to megasuirt EFI what exactly would i need to order from them, and what would i need to get myslef. any info's great cheers
  22. when the car overheated first time how long did you run it for how if you no what i mean. If its got too hot then the head is has probably warped and needs skimming
×
×
  • Create New...