dickie

I'm happy that its caused a stir between people and by no means am i worried about the comments on a for sale thread. I know its a small market that i'm aiming at but thought i'd offer it to people that could appreciate it on here, next move is its going to be advertised in the u.s via dogger on here and see how that goes but would like someone in the uk to get the enjoyment out of it that i had! I'm also aware that its a lot of money but it is what it is and very hard to come by at any price. In answer to the question c5oem this is just a bolt on, maybe an extra plug to put into the loom(not sure) but will come with a vr6 loom from a mk3 aswell. It should have a vw motorport cover on the front but didnt have it when i bought the car and took a bit of research to find out what this manifold was as didnt know too much about it being my 1st vw vr6. This has great advantages over the scrick, oe modification, original vw motorsport part, no silly taking inlet off to do routine maintenance etc. I will consider close offersand don't mind posting worldwide.

any offers before i advertise this elsewhere?

Heres some pics i've found of these fitted to corrados, personally love the look of them but i would as i'm selling them! I'm going to put them on ebay at the end of the week if notsold by then.

Hi, wasn't really looking for px as trying to clear out but let me know what you have to offer and I'll think about it! There are a few pics of corrados with these wheels and specs about so definarely can be done, not sure if arch work is needed. Could courier if anyone wanted.

I'm not 100%, I'm sure there's some knowledgable person who may come along and enlighten us!

I'm in Northampton. Would be able to meet perhaps rather than send them if it helps anyone? Going from northampton to Norwich on Saturday morning.

They do go onto a corrado quite nicely, theres a dew running 9s. The mk3 is mystic blue i believe.

Willing to listen to close offers

Will listen to close offers

Hi, this has taken me over a year to decide to write this advert as loved how my old vr6 drove with this fitted! Where do i start, this is a very rare opportunity to own one of these manifolds. I bought my old vr6 just because it had this fitted, it was my 1st vr so didnt have another to compare it to but now having owned a normal vr I can now say how much of a difference this makes. Gives great low down pull through the gears, different sound to a normal vr also. This was fully working when removed, comes with manifold, ecu (mk3 obd1) I believe remapped to match by storm or stealth ill check the receipt, green bottle, inlet pipe, throttle body, ill also throw in the loom as I believe its had an extra plug put in for the controller on the green bottle(?) This was making 207bhp on the 2.8 vr6 in my old golf, this was without a 6 branch or decat so with those smaller mods could make considerably more! I was going to have it painted to be more like original as its been polished in the past and wasn't my thing really. It looks to have had a small repair on the top front at sometime but this in no way effects its performance in any way. Unfortunately it didnt have the vwmotorsport cover along the front. I'm looking to get £1400 for the set up. Heres some pics

hi, i only have a couple as my phone wiped loads of pictures on its last update :-( i hope they help

Hi, the time has come to sell my modernlines on that ive had on my mk3 vr6 golf for a little while. Selling due to getting my corrado back from the bodyshop and need to make room in my garage! Details- Schmidt modenlines 1 piece aloy wheels, 9" wide by 16", 5x100 stud pattern, et 23 (will check to be sure). I bought these wheels as they are now, they have had a refurb at pristine in milton keynes a couple of years ago cosisting of grey painted centres with diamond turned rim and into the dish 1/2 way. They look great when fitted very different from the normal silver finish. They do however have a few marks around the rims now as theyve been done for a while, this didnt really concern me as they're still very nice wheels. Tyres are 205-40-16 front 2 are falken and have wear on the inner edge due to camber, they were like this when i bought them. The rears are toyo and have some marks on the outside walls but lots of tread on them. They run nice and straight no wobbles and have lots of clearance for bigger brake set ups. I'm looking for £650 ono

I'm a big fan of the recaros in leather. Think the leather shows the shape of the bolsters a little better. Wouldn't be disappointed if I already had the cloth though.

hi, what did you do about frames for the front seats? made or bought?

Sold thank you.

Hi someone was just before you, if it doesn't happen I'll let you know. I'm in billing.

Hi, need to have a clear out of a few bits that im not going to use. Heres a swg scuttle tray, really good but used condition. Gave it a quick wipe for pics. £75 collected from northampton or may be able to sort a courier for a few £ extra Thanks rich

I want £80 delivered, lion has 1st refusal as its his wanted thread. If he's not interested I'll offer it to other interested people. Thanks rich

theres some pics for anyone thats interested in one. ive just given it a wipe with a damp cloth as it was dusty

I've got one, good condition maybe a few minor scratches. I've got a spoonfed carbon one on order so no longer needed. Let me know if your interested. Thanks rich

I'd be in for a set of these. Let me know details please.

Nice looking car! I've never seen those seats before but I like them. Good find!

This looks very very nice. I looked at the ad a few times on eBay I think it was on? I'd say they didn't do this car justice!

Is the carbon roof a full panel on the corrado in this topic? If so where are these sold? Thanks

Hi, I'm just undertaking a conversion into my corrado and was going to go aftermarket management, has anyone got a set up that they'd like to sell? Thanks rich