spanneredmonkey

lol i looked at it on my phone and didnt enlarge the pictures...maybe a bit of a basket case

there is another one on the bay at the moment looks pretty standard but needs some body work

That would be me on my way back from lidl! i seen you giving it some beans off the roundabout! no wonder you didnt have time to wave ;-)

I need a drivers side head light and a pasenger side reflector or a damaged headlight unit so I can refurb the reflector as mine has just failed the mot on NO light pattern, I could also do with a set of front fogs? lenses? driving lights? the ones in the bumper, as mine have a couple of cracks afte rthat she is running smooth and ready for the on going, argument with the wife wanting me to sell it!!

I really really like them!

I have had to work late but I think that it's either 45 or 28

Mine was a short at the main fuse board, it sounds like the wiring to the rad stat is backwards or the replacement has a different configuration from the one you replaced, try and have a play with the way it's wired

I have a 16v with a VR6 transplant and my fan is controlled by a relay, on the main relay board, i cant remember which one but i will have a look tonight. I dont have a 3 stage fan its only 2 stage, and the radiator stat controls the stage it runs at. The relay clicks when the fan comes on and the relay clicks when the fan goes off after over run again its not always 10 mins it seems to go on the temp. Just read your post again.... I had the same thing the fan ran all the time until I turned the ignition on and then it went off..with the ignition on and running all ran as advertised.. after a lot of cable chasing it was a short between to wires on the relay that was initiating the fan when the ignition was off, some quick insulating later and we were sorted,

I would do if I hadn't just replaced all the brakes and bearings!

Pm me some PayPal details and I can do that as well! Cheers may as well have a spare incace I screw up the fitment of it :-)

Its the front that dont think will fit, the thinnest adaptors that I can find are 20mm thick that would cause too much poke

cool can you pm my your paypal and i will get it sent over :-)

Cool how much you looking for it posted?

Is it grey? Rekon the marks will clean off?

Would the adapter/ offset combo not mean rolling arches and the like?

Yeah I know it sucks I don't even think that with a set of adapters they will fit :-(

I know they are rare like chicken lips, but I am looking for a set of the above 16" 4x100 compomotive th monos or similar style wheels for my nugget, any leads or suggestions to similar would be mucho appreciated

This is what I have, and the bit missing, think it's just the fabric but may as well replace the lot

Cheers Chris what you looking at for it?

sweet gents thank you, i take it all head liners were the same colour?

The previous inside sun roof cover has gone, and I need another one for my nugget any one got a spare sun roof sitting around when they replaced theirs?

I will take the coilies if you still have them,

there is allsorts on that list that make the mind boggle who would scrap them, there is more than 50 landrover defenders..... a lancia delta intergrale HF turbo...... who are these morons? and can have the car they have now for a marsbar and a 1500 quid promise!!

Welli have fixed it, so for those that search similar and want an answer, here goes My over run circuit is from a 16v so on finding relay 31 as I don't have an FCM I found that the connection to the pump relay was cut, the second red white cable ( the other goes to the rad temp switch) I re attached it, and tested and it worked, it appeared that the relay didn't switch as there was no switch from the ignition to let it know that it had been turned on or off so ran all the time

Ah nice cheers will see what steath say first as like you say that looks like a bit Heath Robinson and my fuse box is already like a snakes wedding