swampy
Banned Users-
Content Count
324 -
Joined
Content Type
Profiles
Forums
Blogs
Calendar
Articles
Gallery
Downloads
Store
Everything posted by swampy
-
Ending soon Also now have sets to suit the mk1 golf to mk4 rear conversion
-
Yes both payments recived and lines orderd Thanks
-
There used to be a company based just outside Manchester called FROST AUTOMOTIVE they did a kit for this at a reasonable price Not sure if they are still going, they also did anodising kits etc aswell
-
can you pm me your address chap. it comes out strange on the paypal and i dont want them to not arrive
-
Ends are back in stock So can make these when youvwant
-
Ends are now back in stock!!!
-
The correct ends are now in for the custom lines!!! So I can get them made up from now
-
But what thread do the banjo bolts have on them?? Also what's the dimension of the hole that the oil passes through
-
Just need to confirm if the company that supplies me has any banjo ends left to make them up with, if they have you will be looking at £27.50 the pair deliverd Can do any number of rears to suit the mk4 conversion as they have a box of ends attached to hoses long enough to make rears but not fronts
-
for which end of the car?? i can supply them and have supplied several sets to forum users ---------- Post added at 8:59 PM ---------- Previous post was at 7:19 PM ---------- Sorry re read that you want fronts?? I should be able to supply them , but know the company that make them for me are running low ends!
-
hi mate yes, i can do them for £28.50 the pair delivered ---------- Post added at 8:01 PM ---------- Previous post was at 7:59 PM ---------- yes mate can do you a pair for £26.50 delivered the paypal is [email protected] cand i can get them made up tuesday
-
still available if you want them with out the bolts i can do them for £28 including new washers as if you have the bolts in second hand calipers you will need the washers replacing
-
does it have a restrictor in it? if not if you can get the thrread types and length of hose i can get it made cheers
-
hmm thanks for that, i shall look in to it and get some shorter bolts ---------- Post added at 3:38 PM ---------- Previous post was at 3:36 PM ---------- can do them for forum members for £30, would prefer to do that via the forum to save on ebay fees etc yes mate i can do all the lines, see my full advert in the suppliers area
-
http://www.ebay.co.uk/itm/330717884408?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1558.l2649 think a few of you are watching these and one person from here has purchased them please look at my other items and just ask if you want me to develop somthing for the car
-
i can custom make you a set of lines for the conversion, would need you too mesaure the length of the metal pipe and the flexi. its not a avery common thing to do lines this way but its not un heard of, peugeot do it on the v6 coupe fitted with brembo brakes, they use a metal pipe to go from the caliper of around 13cm length and then go on to a flexi (i also make and supply these for the owners forum)
-
can get them mush cheaper than that!! http://www.ebay.co.uk/itm/330717884408?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1558.l2649 also if any one can tell me the length and unions on the metal pipes i can get those mase up aswell
-
a set of the rears to suit!!
-
288 Front Brakes and MkIV Rears -Part Number Thread
swampy replied to fendervg's topic in Drivetrain
is the brake lines you need, custom made and only available from that supplier via me http://www.ebay.co.uk/itm/330717884408?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1558.l2649 ON EBAY -
Overhauling 288mm calipers - what paste to use?
swampy replied to joebloggsVR69's topic in Drivetrain
realy copper slip shoundnt be used on moving parts like the sliders as it is mildly abrasive so over many many movements it can cause wear on items. far better off to get some of this http://www.eurocarparts.com/ecp/c/Saab_9-3_2.0_2001/p/Accessories/Car-Maintenance/Maintenance-Fluids-and-Greases/Grease/?526770250&0&cc5_150 -
Overhauling 288mm calipers - what paste to use?
swampy replied to joebloggsVR69's topic in Drivetrain
Pagid sell a tube of special grease for this purpose, i have had some in my tool box for years and still plenty left as you only need a smear i got my last tube from GSF and it was only a few quid -
yes they are mate, price would be the same as for the standerd set up THOUGH IF ANY ONE ALREADY HAS FRONTS AND IS JUST DOING THE MK4 CONVERSION I CAN SUPPLY JUST THE REARS AT £30 always available, if im not on the forum i can be contacted via email at [email protected] cheers
-
just to bring this back to life i am still able to offer these, can make them to any spec you want for fitting larger front or later rear combinations. part sets or full sets available ALSO CAN OFFER A FULL RANGE OF STAINLESS STEEL BOLTS