swampy

2 front 2 centre 2 rear Nah I'm only kidding though that's how the parts book describe them. It's 2 front and four rear

A torque wrench needs looking after 1. Dont leave the wrench set to a torque for any longer than required 2. Don't use it as an extra long bar to undo tight bolts 3. Don't drop it !!! 4. Speak to your local garage (large one) as they tend to have a companies come around to check and alter the calibration of the tools on a regular basis, see if they will get yours checked.

Good quality plain disks and pagid rs 4 2 blue pads They sent the cheapest pads but I've never had an issue with them on or off track Also look at the rest if your brake system,how old are the flexis?? They deteariate with age and start expand with use, ideal time to upgrade to braided lines (see suppliers forum) Fill with a good quality dot 4 or 5 fluid.

Tesco have all Christmas chocolate out!!!

Well you need the calipers aswell lol If you get second hand calipers ask them to send the bolts with them as my kit contains new washers but NOT bolts

And how much warranty does he give?? And how long will your average box last running said oil??

That's a few less sets of the rears left

I wouldnt wait too long to order one, As I have said above once this batch go then the price will be going up to be more online with goodridge I dropped very lucky with these to get them at this price!!!

http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=120981194668&ssPageName=STRK:MESE:IT 20v coil pack bolts http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=120982459787&ssPageName=STRK:MESE:IT rear brake conversion lines to suit the mk4 upgrade, these are selling very well, first batch is nearly all gone, once they are the price will have to go up as i will have to get new banjo ends made up http://www.ebay.co.uk/itm/330786628827?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1558.l2649 http://www.ebay.co.uk/itm/330786628828?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1558.l2649 if you want brake lines making or supplying to any other spec then just ask and ill see what i can do also the bolts, i can supply most including some suspension bolts

Thumper yours are in the post Dickie yours are on way to me alip, in trying to source you some bolts NEXT ORDER FOR ANY OF THESE GOES IN WEDNESDAY THE REAR CONVERSION HOSES TO MK4 calipers are selling well, must be a popular mod the amount of people on eBay who are buying them

If any wants it I could supply braided fuel hose with aero quip type clamps Would be more than the rubber hose but less than genuine

Yep two washers I have a nice supply of them here

Black hole and nattys blue is a good combo

You have a pm Quality is as good as good ridge Price is lower than them

Alip they got ousted a while back You have a tracking number via PayPal check the status AI188085111GB Please make sure you haven't got a WHIKST you were out card asking you to collect from the sorting office or that some other member of the house hasn't taken them in and Not told you

You would need to attach it to a v14 They will pay you out for any complete monthes left

Yes that could help, or something along those lines BUT I'd be looking at something made from plastic and then covered in that silver heat protection stuff to reduce the temps I prefer to use a standerd air box with a panel filter,y 406 v6 is running circa 220bhp with just a free flow exhaust and panel filter , now has a few more mods Cold air feed from front bumper, custom ground earthing kit Ptfe gasket on throttle body and inlet manifold Tb has being opened up and the majority of the step to the butterfly removed Tb and inlet manifolds all port matched Car certainly feels quicker , need to get it on the rollers and hope to see around the 230bhp mark

Price on the kit depends in what parts you want, battery cables, earth cables , junction box etc for a full set up your looking around £60 Im not that clued up on the car, the lower lights can you remove the inner passenger one and get a duct in there to scoop air up to the filter?? Once the battery is removed of course

I'd certainly be looking at getting more cold air to the filter, can you duct some in from the bumper?? As for battery relocation, it's not hard to do is there anything else fitted to the battery box to stop you moving it?? I have supplied a few kits for French cars and on e38 for doing it, new power cables, earth cables and a junction box. Then need a battery box for the boot to secure the battery in

Can now supply the bolts for mk4 banjo ends front or rear for £6.50 a pair And work is better than I thought so am taking orders

These end soon

To be fair the bolt will probably be ok just use a new nyloc

Hmm they arnt a standerd bolt, the shoulder has that extra thick section it which makes it a very special item

What's the spec of the parts?? Im sure I could supply them for less than that, I already supply a lot of suspension bolts for French cars via forums and ebay