Jump to content

rmn

Members
  • Content Count

    969
  • Joined

  • Last visited

Everything posted by rmn

  1. I am assuming that this has sold? Has it?
  2. Are these still there, or gone yet?
  3. Is this still available?
  4. rmn

    16v crank pulley

    Thanks Wullie, I had the exact same thing happen to my 9A a few years ago and its not a nice feeling. I will get onto the dealers tomorrow and see what they can give me.
  5. rmn

    16v crank pulley

    Hi Guys, Its a number of years sinnce i have been messinng with corrados. I still have my ones, but only getting back into them. On a 16v Motor what is the part number of the crank pully and what is the bolt to use with it? Its a KR bottom end i am talking about. Thanks
  6. Hi, there is mention of a bracket for the accelerator pedal to mount to in this thread. Anyone got a part number or pictures? What is it from? Thanks
  7. Hi, is this a once off, or will the parts be available form now on?
  8. Hi Pat, My car came with these but they were damaged as was the bumper when i got the car, so i took them off. How much for the parts without the washer bottle or pump? So that is the 2 washers, the piping and the coupling piece i think.
  9. Ah, thanks I will pop over and have a look
  10. I have been reading up on the web about rotex xhargers and their application, i know they are all over vr6's and r32's but what about the g60's? I saw a company in norway offering a kit, but no price, so anybody done it?
  11. Well done Karl and the lads Sounds awesome
  12. Thanks guys, i know the bigger the better withing reason. My car will see abit of track time so its got to be able to stop. I was thinking about the Seat kit, i have them on my g60 admittedly the ibiza 4x100 one but it is great. As for pads i was thinking pagid yellow pads or blues
  13. Also do mk5 brakes fit? I know the hub pattern is different, but will the disk offset be the same as mk4's?
  14. Hi guys, i am just wondering what is considered to be the best big brake setup for a corrado 5 stud. I know loads of kits are out there but whats the best value for money and performance. On my g60 i have ibiza cupra r brakes, i know they tend to be a bit grabby but you get used to that. The Corrado will be about 300 bhp for now that the brakes are going into. Suggestions and places to get them please :) Also i dont mind if somebody has some second hand ones for sale :norty:
  15. Great read! Some amount of work gone in I take it you stayed with the drive by cable and not drive by wire throtle?
  16. I read somewhere that the inner drive cups form a mk4 tdi gearbox are 100mm, so it will allow the use if standard corrado inner cv's is this the case? I want to try and put 100mm cv's on my r32 gearbox to simplify the driveshafts. Any input appreciated
  17. Re DTA, you can download the manual from here i am very interested in this as i am not far behind. I assume its P8pro thats being used but i would imagine that the pot setting will be the same for all DTA ecu's here is the link to download the DTA info http://www.dtafast.co.uk/
  18. Savage Project there Pete, where did you get the exhaust manifold done? Very impressive work
  19. rmn

    rmn's G60

    got some updates on this too, i will post some pics soon
  20. Hi guys, some of you will remember this, well i finally got back to it after moving house and job and all that now i am back in corrado mode so its a loom for my dta now and then the car should go back together
  21. not been on here in an age i will post up some more recent pics on tuesday. As GS said i have been really busy for the past while. Got monday and tuesday off so some good progress should be made on it @Phat, thanks for that
  22. Gearoid, i told ya to look under the carpet when you told me about the late boot floor. I got stung with one on here ages ago too, a 1992 G60, it was a total loss in 1994, t boned. It drove fine and was done ok, it got a second hand quartewr panel and was rusting where it was joined, the inner sill was in a state too so i scrapped it! There are lots of dodgy people out there! This was a low enough milage car too, with some you have to ask why such low milage, thats why i nearly prefer a highrt milage car. Best thing to happen the car is to be scrapped
  23. Not been on in a while, Ben, this sounds good and you know when you do that you definatly wont want to sell it!
  24. anyone used the sony one?
×
×
  • Create New...