ross k

gear knob still available guys

heres some pictures of the cracks this one is on the drivers door card this is the worst of the rear two but others to be honest they dont look to bad when fitted a picture of them fitted

update well the rado is pretty much done and should be on this week and brought it a leather interior for a bargain 160 pound with the centre console all window switches etc and only had to travel half an hour to get it what you reckon on it all in good nick only thing is the zip on the top of the centre armrest has gone and their early door cards so need to fill the window switch hole somehow

hi guys fitted a new interior today so have some old bits and bobs all prices exclude postage gear knob with gaitor and surround in brilliant condition looks almost new some wear on the gaitor but can supply a new black one with white stitching for an extra 5 pound after 25 pound for this top money but its in brilliant condition pair of late window switches 10 pound centre console for model without armrest in centre 20 pound good condition usual clips are a bit shot pair of inner door handles with working electric mirror switch 10 pound and lastly a full interior black cloth all in pretty good condition just been vaxed so looks good only problems is a fag burn in the passenger seat and some cracks in the usual places in the door cards other than that nice interior 100 pound collected open to offers on it all and will post most objects will get pictures later located near ashford kent ---------- Post added at 7:15 PM ---------- Previous post was at 7:00 PM ---------- right guys pictures window switches door handles centre console gear knob seats back seats

haha my working spare i might not need it fingers crossed as i found an old motor in the garage and pinched the brushes and filed them to fit so hopefully it should be fixed and on the plus side i learnt about electric motors

hi guys need a new spoiler motor broke the brushed putting mine back together anyone got one ?

got this parcel shelf for sale on ebay brought it recently but no longer need it thanks ross http://www.ebay.co.uk/itm/130930609967?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1555.l2649

hi guys need a backbox for my corrado anything considered just need to be rid of this stupid cherry bomb please thanks ross

well update the bumper wasnt fitted properly so took it of after much swearing at stuck bolts once id removed it all looked a bit ripe underneath but the structual parts looked ok so rubbed it all down and gave it a good cover of hammerite also got all the interior back in and really happy with how its turned out nice and clean so its very nearly their what do we all think

well i persevered today and finally victory thanks for the help guys i need a new bolt now though anyone know where i can get one or what size it is ?

cheers for the help guys will try a few might be worth taking to my friend with a garage to use an impact gun been a bit wary because the one ive removed has ruined thread on the bolt so need to get a new one cheers guys

hi guys ive been trying to remove my front bumper from my corrado however i cant get three of the four bolts to budge has anyone got any tips and i am supporting the centre of the bar with a jack is this common thanks ross

hi mate after a backbox for my valver aftermarket or standard can you help also need the piece of trim that goes around the air vent in footwell in black please thanks ross

still need both of these especially the air vent trim thanks ross

hi guys after either a standard or aftermarket backbox maybe a whole system but nothing to expensive also after the plastic vent surround that goes over the vent exit in the carpet thanks ross

hi guys after some advice ive got some 17x7 et35 rims on my valver the front rub on the suspension and ive been offered 4 15mm spacers cheap i have no doubt the front will be fine but im worried the rear will rub on the arches as it seems pretty close as it is now so would it look silly having to 15mm on the front two 5mm on the back or should 15mm be ok all round im lowered quite alot heres a picture thanks ross

update guys got the new wheels fitted and rather suprised i think they look quite good and at only 60 pound didnt cost alot so happy with them might paint them gun metal grey at a later date and got to space the fronts out because their just catching the suspension again also put the splitter on and back to blacked it this can be seen on the first picture wet sanded the rear spoiler and came up better than the paint on the car did a door membrane yesterday and fitted drivers door card got to do the other side today hope you like thanks ross ---------- Post added at 10:37 AM ---------- Previous post was at 10:36 AM ----------

soar a blue corrado today absolutely mint very low running cambered schmidt modernlines looked lovely on a personal plate something vrt i was in a silver van soar you going up marlow hill

im near ashford in kent but am always going between there and high wycombe thanks ross

hi guys i need a backbox for my 16v after something that makes reasonable noise but not to obnoctious car came with a cherry bomb and it has to go will also consider a standard item thanks ross also still need the the little trim that goes round the blower outlet in the carpet also need the trim that pushed round a stereo ideally for a sony stereo thanks ross

thanks nice to get a comment yeah would like to get all red rear lights but might get the spoiler sprayed white again when i get the bonnet done

got these 17 inch alloys on ebay http://www.ebay.co.uk/itm/130912932179?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1555.l2649

well update decided to buy some cheap rims with tyres to bung on for now as the grey ones needed new wheels bolts and spacers and to be honest couldnt justify the extra 100 pound didn't like them that much .so now i can save for some nice ones so brought these for 60 pound and pretty happy only ones curbed and they have nearly new federal tyres on and they bolt straight on also put the back seats back in and its starting to look like a car again finally painted the spoiler black not sure but can always re paint it comments welcome

bbs 16x9j et 15 and 16x8 et 20 on a valver any chance

Oo ooh that sounds good.im in kent but can travel and im also in high wycombe alot thanks ross