Jump to content
Sign in to follow this  
swginn

Steve's 94 Aqua Blue Pearl Valver

Recommended Posts

Hey lads, what's the craic??

 

Been a member here for a while now looking to buy my first Corrado. Picked her up last month so i said I'd better put a few posts up.

Very helpful forum, I've been able to find an answer to nearly all of my questions here.

So anyway here's the spec on the car and a few pics:

 

1994 Aqua Blue Pearl 2.0 16V

66k

Full VAG Service & MOT History

Cobra Alarm

Sony Head Unit

17" BBS RX/ BF Goodridge Profiler G

Aero Wiper Conversion

Engine is standard

 

FK Highsports are on the way to lose the ridiculous 4x4 ride height, along with clear repeaters. Then I'll attack the engine. :D

 

So.....what do ye think?? :wink:

 

161-6110_IMG.jpg

 

161-6109_IMG.jpg

 

161-6106_IMG.jpg

 

161-6104_IMG.jpg

 

Standard engine :(

160-6081_IMG.jpg

 

Aero wipers went on today

160-6089_IMG.jpg

 

160-6100_IMG.jpg

 

160-6098_IMG.jpg

Share this post


Link to post
Share on other sites

That looks gorgeous mate!! De Tango it with some clear side repeaters and some M3 style rears, lower it and your on to a awesome looking C!!! Just my opinion though!

Share this post


Link to post
Share on other sites

That looks like a great base for some choice mod's, good buy!

 

What are you going to do about the nasty scratches on the windscreen though? ;)

Share this post


Link to post
Share on other sites

Very clean! Looks just the job :)

 

Think it'll look terrific once its been lowered.

Share this post


Link to post
Share on other sites

Cheers Lads for all the comments.

 

Spent a while looking for a nice genuine low-mileage valver that hadn't been raped by the boy racers and finally this one came up. Owned by a Cop and then a Heli Pilot before me so she's been driven and maintained like a Corrado should be.

 

No scratches on the windscreen; overhead powerlines, although you had me worried!!

 

Will keep ye posted on the progress!!

Share this post


Link to post
Share on other sites

I normally hate those wheels on a c, but today, they seem just right.

 

Very clean looking rado, and with only 66k, i bet shes a minter!

Share this post


Link to post
Share on other sites

Certainly looks mint from the picture of the windscreen.. the paint on the bonnet looks factory fresh! Lovely!

Share this post


Link to post
Share on other sites

Bit of progress on the lowering front.

Ordered some KW Variant 1 coilovers from Darren at G-werks today. Hope to have them fitted by the end of the month. Not a lot of people on here running them I don't think but have heard great things about KW so hopefully they'll be sweet. They certainly look the business anyway.

 

Cheers Darren!

Share this post


Link to post
Share on other sites

Nearly there now lads, she'll be slammed on Monday. Gonna start by dropping her about 50mm. Can't afford a new spoiler just yet so want to hold onto my current one for a while!! :)

 

The KWs really look good!! They seem really well made and should last for a while too, being stainless. Can't wait to throw her around a bit after Autowerks (my local VW specialist) have sorted her!! Sweet :D

 

161-6171_IMG.jpg

 

161-6170_IMG.jpg

Share this post


Link to post
Share on other sites

Right Lads, Here ye go. Lowered, not too sure by how much yet.... must get out the tape! My local VAG specialist Autowerks have just levelled it and I'm gonna drive it as is for a couple of weeks until she has settled. Haven't caught anything yet so I reckon I'm safe to drop another 15mm at least :D. Completely transforms the look and feel of the car. She handles like a go-kart now and the ride is firm but not harsh. This is the way the Corrado should have rolled out of the factory.

 

The lads in Autowerks did a top-notch job of overhauling her and she drives much better now. Needed new engine mount and plugs (was running sh*te champions) and what a difference it makes. She drives so much smoother and the pick-up has improved too. Replaced the top mounts with VR6 mounts, replaced the ball joints and anti-roll bar linkages. Got a new rad and exhaust mount too. A costly service but the difference it made to the car was well worth it.

 

Here are the pics anyway, went a bit mad!!

(she's crying out for a new splitter, I know!)

 

IMG_6362.jpg

 

IMG_6364.jpg

 

IMG_6368.jpg

 

IMG_6371.jpg

 

IMG_6377.jpg

 

IMG_6386.jpg

 

IMG_6389.jpg

 

 

 

 

....And more!

 

IMG_6406.jpg

 

IMG_6403.jpg

 

IMG_6375.jpg

 

IMG_6387.jpg

 

IMG_6372.jpg

 

IMG_6388.jpg

 

IMG_6369.jpg

 

All I need now is my corrado-forum stickers!!

Share this post


Link to post
Share on other sites

Looks Bang On mate!!!!

 

Did you use spacers on your alloys?

 

Also what suspension did yoo go for?

Share this post


Link to post
Share on other sites

Cheers lads,

 

Went for KW Variant 1 from Darren. Couldn't really justify the extra for Variant 2 when I'm never really likely to adjust the damping. It proved to be worth it in the end as I really like the damping as it is. Great price on the KWs too at the moment.

 

Had to run a 5mm spacer on the rears just for that extra bit of clearance.

Share this post


Link to post
Share on other sites

I had use 5mm spacers on my front as well after I dropped the suspension.

 

Tyre was catching the coilovers

Share this post


Link to post
Share on other sites
I had use 5mm spacers on my front as well after I dropped the suspension.

 

Tyre was catching the coilovers

 

Mine seem fine anyway. Didn't need the spacers on the fronts. It's probably down to the Coilovers being different I suppose.

 

Gonna order some clear repeaters and FK smoked/red rears there in a bit too. Just looking on the venom website, which are the better repeaters to go for: clear or crystal?

 

Also what size chrome top bulbs do i need for the FKs and repeaters?

Share this post


Link to post
Share on other sites

Yep my fronts seemed to catch worse than the rears.

 

I went for clear indicators and M3 stlye lights on the back, as the front is all clear, guess it is just personal pref.

 

I did look on memebers gallery as well just to check out my options.

 

As for bulbs think they only come in one size.

 

Also for my side indicators I found the new seals were crap (leaked) and ended up using a set of new geniune ones

Share this post


Link to post
Share on other sites

Been a while since I've posted up any photos, so after a quick wax today I said I'd take a few snaps. Murphy's Law no doubt.... it would have to get dark before I got the camera out!

 

Anyway, I've been quite busy since my last update:

 

New Splitter

New Plates

Debadged Grill

Smoked/ Red tailights

Clear Repeaters

Coilovers wound down even more

5mm spacers on front now as well

Uprated wiring loom

Headlights 'detailed'

 

I stripped back the horrible chrome on the tailight surrounds to black using autosol(Cheers Bally!!) so they'd look a little more 'factory'... but of course forgot to take any pics of this!

 

As for the grill, I reckon once I track down a nice chrome 16V badge for the corner it'll finish it off nicely.

 

It actually sits a lot lower than in the pics but I had her jacked up to take the wheels off for a clean and the coilovers hadn't settled back down yet.

 

Here ye go anyway, no fancy locations, ye'll have to make do with the driveway I'm afraid.

 

IMG_6490.jpg

 

IMG_6488.jpg

 

IMG_6457.jpg

 

IMG_6459.jpg

 

IMG_6456.jpg

 

FK Smoked/Red

IMG_6480.jpg

 

IMG_6475.jpg

 

Interior (needs leather!!)

IMG_6485.jpg

 

Detailed Headlights

IMG_6495.jpg

 

IMG_6516.jpg

 

IMG_6507.jpg

 

Uprated Headlight Loom..... I can see!! :D

IMG_6505.jpg

 

IMG_6499.jpg

 

IMG_6457.jpg

 

IMG_6472.jpg

 

One more...

 

IMG_6503.jpg

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

×
×
  • Create New...