Will BMW Split Rims fit Corrado

[jma 0]

Hi Guys,

 

My mate has some beautifull bbs staggered splits rims, I was wondering would these fit my rado :scratch: or do I need adpaters.

 

Cheers

[swiftkid 1]

if they are 5 stud they will be wrong fitment, think they are something like 5x120 so will need adapters but there are plenty of adapters kicking around on ebay and edition at the moment. just find out what the pcd is first! and also make sure the width of the adapters don't make the et too unmanagable

[Leonard 0]

I doubt it very much.

 

Why? Cos I havent seen any corrados ever with BMW split rims :grin: Pretty sure the ET is too low on the BM's to make adaptors viable

[Graphite 0]

It depends on what BBS splits they are.

 

I have some BBS RC041's (two peice from the BMW M3) on my G60. Theyre 5x120 with adapters down to 5x100. I decided to go the expensive route and change all my hubs and disks to 5x100.

 

If theyre 17" like mine are then you'll probaby need to get the arches flared/rolled like I am having to. The rubber may get sliced by the arch when you go over a bump like mine do if you don't get them flared.