VR6 Turbo block, 2.8 24V AUE block n Head, R32 pump/baffled sump, SP chargecooler

[Kevin Bacon 5]

Moving house soon, so time for a garage clear out!

 

VR6 turbo block. Stealth built 60K ago. 83mm Wossner 8.5:1 pistons. No wear lip at all in any of the bores. Suffered from pinking and piston 5 let go. Comes with a brand new replacement piston. Just needs fitting. I would fit it myself but I don't have an 83mm piston tool. Stealth have a custom made tool and wouldn't charge the earth to drop the piston in and hone the bore - £300.

 

 

AUE 2.8 24V block and head. In excellent shape. Engine split (was going to boost it) for easier transportation. Plus anything else related I have laying around, such as ECU, bits of loom etc etc. Maybe of use to someone - £200

R32 sump and pump combo (the PROPER baffled and shallow solution) - £100SOLD

 

 

Schimmel Chargecooler with specially made base to fit in Corrado boot. Comes with 2 different radiators. A genuine VW aircon rad and the original setrab cooler supplied in the kit - £250

 

Due to the size and weight of these items, they are Collection only please, or shipping at buyer's cost.

 

Edited March 21, 2012 by Kevin Bacon

[Anton Sobriquet 0]

I'm up for the R32 sump and pump. How about £75?

[science 0]

2nd dibs on the R32 sump and pump combo for £100.

[Anton Sobriquet 0]

OK, £100 then....

[robo22sri 10]

Kev tried ringing about the block and pistons

[fla 9]

what advantage would the turbo block have over the normal VR block? Quite interested...

[lilfuzzer 1]

Kev any chjance of the pics of the radiators for teh charge cooler set up?

 

Also would you consider selling one aof the rad seperately as need to go barrel charge cooler so making my own set up up.

 

Cheers

[emu 0]

what advantage would the turbo block have over the normal VR block? Quite interested...

 

lower compression for turbo and 3l instead of 2,9l, more strength as different material for rods and pistons. Bargain price anyway.

[Kevin Bacon 5]

Thread updated with pics. I'll take some more tomorrow as some of the stuff is buried in the corner of the garage.

 

In answer to Rob's question, yes a standard VR6 head is all that's needed to complete the engine. Plus obviously all the turbo stuff if you want forced induction, which is likely if interested in a 8.5:1 block!

 

Anton PM'd me a definite offer for the sump/pump but if it falls through, Science gets it.

[lilfuzzer 1]

Off topic but nice garage ;)

[black dub 0]

hi mate is the charge cooler set up the full kit ?

cheers

[Kevin Bacon 5]

Yep. You'll need some more hose, but it's just standard heater hose. 15mm ID IIRC. I'll check tonight.

[black dub 0]

so every thing shown here? http://www.spturbo.com/onlinestore/index.php/forced-induction/intercooler/sp-air-to-water-intercooler-system.html

if so ill take it

Edited March 22, 2012 by black dub

[black dub 0]

is that all good.