B5VWC 0 Posted November 30, 2012 (edited) I am selling my high performance Engine & Gearbox + Uprated Parts perfect for Turbo or Supercharger setups. All parts have been replaced with high quality or genuine VAG parts I built this to cope with 400hp+ and can prove this with the results I have achieved consistently breaking 400bhp/18pi at Stealth Racing... SCHIMMEL BIG VALVE CYLINDER HEAD £500.00 OBD2 Cylinder Head (has oil opening for timing chain lubrication) JB Weld filled, Resurfaced, Hot Tanked, and Assembled New Phosphorous Bronze Guides & Seals 1mm Oversize Ferea Inconel Valves Multi Angle Valve Cuts Shortened Valve Stems Titanium Spring Caps & Retainers Heavy Duty 7500rpm Springs Port Matched Intake: Exhaust & Inlet ARP Uprated Exhaust Studs Includes SP 263 Camshafts & INA Lifters New Prices & Details: Price up this complete spec and it’s going to easily come to over £1000 and more http://www.spturbo.com/onlinestore/index.php/services/vr6-12v-cylinder-head.html http://www.spturbo.com/onlinestore/index.php/12v-vr6-camshaft-set-263-street.html http://www.spturbo.com/onlinestore/index.php/raceware-vr6-24v-2-8l-headstuds-579.html FORGED 2.9 LITRE VR6 LOW COMPRESSION SHORT BLOCK £1200.00 ABV Block cleaned & repainted using POR 15 products Original 2861cc 82.0mm Block rebored to 2891cc 82.5mm (True 2.9 Litre) by Stealth Racing Wossner Low Compression Forged Pistons Pistons give a compression ratio of 8.0:1 which goes up to 8.5:1 with a steel gasket Wossner H-Beam Connecting Rods ARP Uprated Rod Bolts New VAG Main & Big End Bearings + Caps installed *Will also include 5L Fuchs Titan Race Pro S 5w50 Oil New Prices & Details: Price up just the performance & vag parts alone – this is a bargain!!! http://forged-pistons.co.uk/webshop/wossner-automotive-forged-pistons/volkswagen-forged-pistons/corrado-golf-sharan-vr6-turbo-low-compression-wossner-forged-pistons-9093/ http://www.spturbo.com/onlinestore/index.php/volkswagen/mk3-94-98/vr6/engine/pistons-rods/vr6-h-beam-connecting-rods-5-16-bolt.html Engine has just over 4000 miles on it. Run in for 2000 miles below 3000rpm. Oil & Filter changed at 500 miles and then 2000 miles. Ran on Fuchs Titan Race Pro S 5w50 Oil and G12++ Coolant only. ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- 02A GEARBOX REBUILT WITH 3.68FD & PELOQUIN LSD £500.00 Original 02A Gearbox Rebuilt by Stealth Racing 3.68 Final Drive installed (snappy acceleration sits in torque rev range) Peloquin Limited Slip Differential with ARP fittings New Prices & Details: Bargain price considering the LSD will cost more than this alone http://www.peloquins.com/products_02A.html ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- UPRATED ENGINE & GEARBOX PARTS Cromoly Lightweight 9lb Flywheel £80.00 Helix Sports Clutch £150.00 http://www.helix-autosport.com/performance-clutches/volkswagen/ Schimmel Ignition Leads (8mm) £40.00 >>> SOLD http://www.spturbo.com/onlinestore/index.php/volkswagen/corrado/vr6-92-95/ignition-fuel/vr6-wire-set-short-runner.html Samco Black Coolant Hoses £120.00 >>> SOLD Vibratechnics Front Engine Mount Road - VAG950M £70.00 Vibratechnics Rear Engine Mount Road - VAG885M £40.00 Vibratechnics Gearbox Mount Road - VAG875M £40.00 ...OR TAKE ALL 3 FOR £130.00 http://www.vibra-technics.co.uk/vw/golf_jetta_vento_mk_iii ARP Head Stud Kit with ARP Lubricant £100 These has been advertised on other forums also --------------------------------------------------------------------------------------------------------------------------------------------------- FORUM BUILD GALLERY http://the-corrado.net/showthread.php?6946-Black-VR6-Rotrex-Mapping-Update-on-Pg-20/page23 --------------------------------------------------------------------------------------------------------------------------------------------------- RUNNING SETUP WITH NEW ENGINE RUNNING IN: ROLLING ROAD AT STEALTH WITH REBUILT ENGINE @ 28 DEGREES IN WORKSHOP: RECENT VIDEOS OF CAR AT IDLE & ON THE ROAD: Edited December 17, 2012 by B5VWC Share this post Link to post Share on other sites
P3rks 11 Posted November 30, 2012 (edited) Expressing interest in the cylinder head! Does it come with any proof of work such as receipts? Why are you selling it? Is the head good to go.. i.e. can it be fitted straight away with no other work? When can you get this removed, will you post and how you want payment? PM me. Edited November 30, 2012 by P3rks Share this post Link to post Share on other sites
B5VWC 0 Posted November 30, 2012 Expressing interest in the cylinder head! I'll have it. Does it come with any proof of work such as receipts? When can you get this removed, will you post and how you want payment? PM me. All work was done by Schimmel I have detailed Invoice with all the work completed on the head and Receipt for the SP 263 Cams. Its Cash on Collection only Im in Coventry. I can remove anytime - I will pm you my contact number. Share this post Link to post Share on other sites
P3rks 11 Posted November 30, 2012 Got the Pm, I'll drop you a call over the weekend. Rich Share this post Link to post Share on other sites
lilfuzzer 1 Posted December 1, 2012 If only this head had came up before I built mine. Defo good price Share this post Link to post Share on other sites
captainredeye 0 Posted December 1, 2012 (edited) Very good price with you including the cams, similar to my own build but I don't have the oversize valves. Do you know what the compression ratio is on the block? Ok its the link doh! Can the obd2 head be put into a obd1 car? Edited December 1, 2012 by captainredeye Share this post Link to post Share on other sites
B5VWC 0 Posted December 1, 2012 (edited) The whole engine was running in my Corrado, OBD2 Head + OBD1 2.9 ABV Bottom End, the OBD2 head just has oil opening to lubricate the chains thats all the difference really. My Build Thread is here: http://the-corrado.net/showthread.php?6946-Black-VR6-Rotrex-Mapping-Update-on-Pg-20/page23 Price is good its even better if the whole block is taken as you get the extras and ready to drop in engine will save someone a fortune especially those who have don turbo or supercharged but not uprated their engine: the overall cost saving is huge. Pistons give a compression ratio of 8.0:1 which goes up to 8.5:1 with a steel gasket. Edited December 1, 2012 by B5VWC Share this post Link to post Share on other sites
Anton Sobriquet 0 Posted December 1, 2012 Price is good its even better if the whole block is taken as you get the extras and ready to drop in Why are you selling? Where is it, and if not at Stealth, can you get it there? What's your price for the full setup? Share this post Link to post Share on other sites
B5VWC 0 Posted December 1, 2012 Why are you selling? Where is it, and if not at Stealth, can you get it there? What's your price for the full setup? Just moving on mate not using much as you can see the mileage is very low but then its difficult to sell/value a performance car so shifting the performance parts then hopefully put back to standard £2000 for the whole setup at the moment I feel that is good value for what you get I am 20 minutes from stealth and, this is how it looks to today ready to lift out and take away Share this post Link to post Share on other sites
vr6turbo 10 Posted December 2, 2012 I will take the head Share this post Link to post Share on other sites
B5VWC 0 Posted December 10, 2012 Just have the following performance parts leftover now see page 1 for more details... 02A GEARBOX REBUILT WITH 3.68FD & PELOQUIN LSD £500.00 Original 02A Gearbox Rebuilt by Stealth Racing 3.68 Final Drive installed (snappy acceleration sits in torque rev range) Peloquin Limited Slip Differential with ARP fittings Vibratechnics Front Engine Mount Road - VAG950M £70.00 Vibratechnics Rear Engine Mount Road - VAG885M £40.00 Vibratechnics Gearbox Mount Road - VAG875M £40.00 ...OR TAKE ALL 3 FOR £130.00 Share this post Link to post Share on other sites
jscVR6 0 Posted December 10, 2012 pm sent about the gearbox Share this post Link to post Share on other sites
coullstar 0 Posted December 10, 2012 Would you courier the gerabox? Share this post Link to post Share on other sites
jscVR6 0 Posted December 10, 2012 I'll take the gearbox and collect tomorrow as per pm. Cheers, J Share this post Link to post Share on other sites
B5VWC 0 Posted December 10, 2012 Would you courier the gerabox? Sorry mate would have been collection only I'll take the gearbox and collect tomorrow as per pm. Cheers, J Thanks J See you tomorrow Share this post Link to post Share on other sites
Dox 22 Posted December 10, 2012 I'll take the gearbox and collect tomorrow as per pm. Cheers, J If the sale of the gearbox falls through I'll take it and collect at the weekend? Share this post Link to post Share on other sites
science 0 Posted December 10, 2012 2nd dibs on the head please. Share this post Link to post Share on other sites
B5VWC 0 Posted December 11, 2012 I'll take the gearbox and collect tomorrow as per pm. Cheers, J If the sale of the gearbox falls through I'll take it and collect at the weekend? Gearbox sold tonight thanks JSC999 2nd dibs on the head please. Sorry mate Head sold last week ~ Just have Vibratechnics Mounts left now Share this post Link to post Share on other sites
B5VWC 0 Posted December 26, 2012 All Parts now sold thanks Share this post Link to post Share on other sites
