Tristan Carson 10 Posted December 4, 2013 Just taken my debadged grill out and replaced it with a second hand original. Only thing is the fit is really sloppy. I can take it in and out by hand....easily. Afraid it might drop out if i brake hard :eek: Its got one tag missing (l/h side) Any ideas to get a snug fit... Quote Share this post Link to post Share on other sites
seanl82 23 Posted December 4, 2013 There should be foam grommets where the tabs sit in at the bottom. The top clips should hold firm on their own, but if not a little bit of amalgamating tape round the clip when its sat in should hold it firm. Quote Share this post Link to post Share on other sites
dragon green 4 Posted December 4, 2013 Not foam,they are rubber ! I replaced mine a few years ago Quote Share this post Link to post Share on other sites
Tristan Carson 10 Posted December 4, 2013 Cheers for that. There may be some on the old Grill. Will have a look and use those if they are present. Quote Share this post Link to post Share on other sites
carrots 1 Posted December 4, 2013 mines loose and easy to take off when bonnets open.the bonnet holds it in place tho Quote Share this post Link to post Share on other sites
Jim Bowen 1 Posted December 5, 2013 Clips at the top should have a bit in the middle as well, have seen them broken off before. Quote Share this post Link to post Share on other sites
seanl82 23 Posted December 5, 2013 Not foam,they are rubber ! I replaced mine a few years ago Really! Mine look like foam 18 years later! Lol Quote Share this post Link to post Share on other sites
MarkFoster 0 Posted December 5, 2013 A strategically placed zip-tie will allay any fears of the grill dislodging at an inappropriate time... Quote Share this post Link to post Share on other sites
