Suspension Parts Bundle [OPEN TO OFFERS!]

[UseOnceDestroy 0]

Unfortunately, I have come to the end of my journey with the Corrado :(

 

Among other bodywork issues, rust has taken over the rear arches and around the fuel cap. I have been looking for a rear quarter for as long as I remember and I'm not willing to pay £700 that VW Heritage are asking. I have looked into buying a shell and breakers that I could cut the rear quarter out of but none of these options are financially viable. Especially now I am looking into mortgages.

 

I have been collecting parts to restore the car and I am now looking at selling them. I am hoping to sell everything to the one buyer, someone who can take over from where I left off and make a Corrado out there VERY VERY happy :) I'm not keen on selling individual parts really.

 

 

I have included ETKA diagrams. For my own benefit, I colour coded each diagram and colour coded and numbered the corresponding part. Every part is either marked in this way, has its part number on it or both. I also researched the majority of torque settings which are all noted on the part too.

 

I have circled in red the parts that I have, they are all listed below.

 

All these parts are NEW and genuine VW unless specified.

 

FOR CORRADO VR6

 

BLUE

 

R32 REAR Wishbone Bushes - QTY: 2

(1) 1H0 407 151 A - QTY: 1 (USED, POWDER COATED)

(1) 1H0 407 152 - QTY: 1 (USED, POWDER COATED)

(2) N 019 538 2 - QTY: 2

(3) N 101 277 07 - QTY: 6

(4) N 102 078 03 - QTY: 4 (ONLY 2 REQUIRED)

(5) N 904 840 03 - QTY: 2

(6) 1J0 407 175 B - QTY: 2

(7) 191 407 181 D - QTY: 2 (FRONT WISHBONE BUSH)

(8 ) 1H0 407255 - QTY: 1 (USED, POWDER COATED)

(8 ) 1H0 407256 - QTY: 1 (USED, POWDER COATED)

(9) N 903 213 02 - QTY: 2

(11) 1H0 407 365 - QTY: 2 (BALL JOINT)

(12) N903 237 04 - QTY: 2

(14) 1H0 411 309 F - QTY: 1 (USED, POWDER COATED)

(15) 191 411 314 - QTY: 2

(16) 535 411 315 - QTY: 2 (DROP LINK)

(17) N 019 411 314 - QTY: 2

(18 ) N 902 264 04 - QTY: 2

(19) 191 411 334 - QTY: 2

(22) N 903 237 04 - QTY: 4

(NOT NUMBERED, BOLT FOR 22) - QTY: 4

 

RED

 

(8 ) 191 615 611 D - QTY: 1 (NEW, POWDER COATED)

(8 ) 191 615 612 B - QTY: 1 (NEW, POWDER COATED)

(9) N 903 698 01 - QTY: 8

(9A) 321 501 119 A - QTY: 8

(15) 1E0 609 745 - QTY: 2

 

YELLOW

 

(2) FRONT CROSS MEMBER - QTY: 1 (USED, POWDER COATED)

(3) SUPPLIED WITH POWERFLEX BUSHES.

(4) 191 199 187 - QTY: 2 (USED, POWDER COATED)

(5) N 903 059 01 - QTY: 4

(7) N 101 417 01 - QTY: 2

(9) RENSHAW POLYURETHANE ENGINE MOUNT (NEW)

(10) 1H0 199 635 - QTY: 1 (USED, POWDER COATED)

(11) N 900 744 01 - QTY: 3

(13) N 102 416 05 - QTY: 1

(14) N 100 704 03 - QTY: 1

(15) N 904 897 01 - QTY: 1

(16) SUBFRAME - QTY: 1 (USED, POWDER COATED)

(17) RENSHAW POLYURETHANE ENGINE MOUNT (NEW)

(18 ) N 019 533 10 - QTY: 4

(19) 3A0 199 402 - QTY: 1

(20) N 102 096 05 - QTY: 2

(21) N 102 575 01 - QTY: 2

(23) 357 199 354 J - QTY: 1 (USED, POWDER COATED)

(25) N 105 070 01 - QTY: 2

(26) N 905 532 02 - QTY: 1

(28 ) N 907 965 02 - QTY: 3

(32) N 102 416 05 - QTY: 1

(33) N 100 670 03 - QTY: 2

(34) N 019 504 2 - QTY: 1

(35) N 102 862 03 - QTY: 2

 

GREEN

 

(6) 333 501 117 - QTY: 1 (USED, POWDER COATED)

(6) 333 501 118 - QTY: 1 (USED, POWDER COATED)

(7) 321 501 119 A - QTY: 8

(8 ) N 908 773 01 - QTY: 8

(12) 1H0 501 541 A - QTY: 2 (REAR BEAM BUSH)

(15) N 903 544 01 - QTY: 2

(16) N 903 237 04 - QTY: 2

(17) N 101 417 01 - QTY: 6

(20) 871 511 423 - QTY: 1

(23) 191 598 625 - QTY: 2

 

 

Below are more parts that I don't have part numbers for.

 

 

FRONT TOP MOUNT(MEYLE) - QTY: 2

REAR TOP MOUNT (TOP)(MEYLE) - QTY: 2

REAR TOP MOUNT (BOTTOM)(MEYLE) - QTY: 2

EICHER ABS SENSOR REAR - QTY: 2

EICHER ABS SENSOR FRONT - QTY: 2

REAR BEAM (USED, POWDER COATED)

FRONT BRAKE SHIELDS (NEW, POWDER COATED)

 

All of this.....

 

BILSTEIN B12 PRO KIT SUSPENSION. SOLD!!

 

 

I bought all of this last year and in total it cost me over £2000. I'd like to see as much of that back as possible but I am open to offers.

 

Any questions are welcome, I'll try to answer them :)

Edited February 27, 2014 by UseOnceDestroy

[clumpy1 11]

How much would you like for the B12 kit mate? PM me if you like.

Edited February 10, 2014 by clumpy1

[matasj89 10]

I'm after the rest of the stuff :) - might as well PM me.

[Jim Bowen 1]

Really interested in some of those bits. Mainly rear beam and bits.

[GlosterOx 0]

How much would you like for the B12 kit mate? PM me if you like.

 

Had this same kit fitted to my car at the weekend, has made a massive difference to the way it rides and handles in general.

 

Ian.

[clumpy1 11]

Had this same kit fitted to my car at the weekend, has made a massive difference to the way it rides and handles in general.

 

Ian.

Good to know Ian I have been looking at these for a while and researching..

[Dude VR6 0]

I'll take the front cross member please

[easypops 8]

Interested in the Front subframe and wishbones? They are for a VR6?

[UseOnceDestroy 0]

B12's provisionally sold to clumpy :)

 

Thanks for your interest lads but I would prefer to sell everything else together.

 

If there is no interest in that then I will look into selling separately but I'll give it a bit of time first.

 

Cheers

[mic_VR 3]

So how much do you want for all the rest?

[clumpy1 11]

Come on Mic it's easy enough to source the price for the B12 kit take that away from what it originally cost the guy (2k+) and there you go ;) I don't think a wee cheeky £400 bid is going to get it though :)

[mic_VR 3]

Haha! But I know what you're like mate, you probably got such a good deal he now needs more to break even!

[clumpy1 11]

You are the second person who has made allegation's of this sort I don't know where you guy's get this idea about me

[UseOnceDestroy 0]

So how much do you want for all the rest?

 

£1500 would put me close to being even, I'll listen to offers on that :D

[UseOnceDestroy 0]

Bilstein b12 pro kit suspension sold to clumpy.

[ChrisL 18]

If you decide to split, in the next week or so I will need to buy:

Ball Joints & lock plates,

Drop links,

bottom arm bushes

ARB bushes & metal plate,

Track rod ends,

All the bolts that hold the subframe in place,

Bolts that hold the bottom arm to subframe,

 

Chris

[clumpy1 11]

If you decide to split, in the next week or so I will need to buy:

Ball Joints & lock plates,

Drop links,

bottom arm bushes

ARB bushes & metal plate,

Track rod ends,

All the bolts that hold the subframe in place,

Bolts that hold the bottom arm to subframe,

 

Chris

Just buy the lot Chris you know it make's sense you are going to end up needing what you don't buy now and will end up paying silly money

[ChrisL 18]

I dont have £1500 James and I dont need anything for the back of the car. I do need everything in that first picture though. Am going to ring the TPS this week.

[clumpy1 11]

I dont have £1500 James and I dont need anything for the back of the car. I do need everything in that first picture though. Am going to ring the TPS this week.

Thing is but mate "everything in the first pic" is genuine part's TPS :censored:

[clumpy1 11]

Hi Lee arrived safe and sound mate thank you if anyone is looking to buy from this seller I couldn't recommend him highly enough excellent communication/updates courier details etc arrived very quickly and most importantly 100% trustworthy :salute:

[UseOnceDestroy 0]

Glad to hear it mate :D Cheers for the recommendation! Any offers for the rest?

[UseOnceDestroy 0]

£1350 anyone?! Collected!

[n3p 3]

This for a VR6?

[UseOnceDestroy 0]

It is yes :)

[n3p 3]

Too tempting. I am expecting a very large garage bill next week but if it's still around after that I'll see where I stand. That is unless you're interested in a VR6 supercharger kit minus an ECU? :norty: