Having a clear out - some parts free

[Stonejag 10]

To be honest I've forgotten which one is which so I'll let you decide :lol: One has a higher gloss to it than the other (i.e. it's more shiny), but both obviously 'work'.

 

Sump pictures - apologies they're not great, it's hard to take pictures of dark satin things!

 

 

 

Stone

[Grum21 10]

Hi could you put pic of spoonfed scuttle cover on please??

[Stonejag 10]

Typical, another hard-to-photograph dark thing :lol: Let me know if these are OK.

 

 

[Ruggy 10]

The passenger side is the duller one, I'll need to have a look at mine and see if yours is any brighter. The reason I need one is because mine is quite dull and I have a feeling it'll fail it's MOT because of no beam pattern.

 

How do you remove the reflectors? Can it be done through the front of the headlight after removing the glass. Or do you need to remove the whole headlight and take it out from the back?

Reason I ask is because I can't get the full headlight out because the middle, low down screw is completely rusted through.

 

Cheers

[Ruggy 10]

The passenger side is the duller one, I'll need to have a look at mine and see if yours is any brighter. The reason I need one is because mine is quite dull and I have a feeling it'll fail it's MOT because of no beam pattern.

 

How do you remove the reflectors? Can it be done through the front of the headlight after removing the glass. Or do you need to remove the whole headlight and take it out from the back?

Reason I ask is because I can't get the full headlight out because the middle, low down screw is completely rusted through.

 

Cheers

[MrtinRP 10]

Sump looks good.. I'll take it, I was gonna buy a new one because it looks as if some chimp jacked me car up by the engine, but thicker is a bonus. I shall pm

[Stonejag 10]

They do come out of the front, but you most likely won't be able to do it with the headlights fitted - just getting the glass off would be horrific and you're likely to break the top adjuster getting the reflector out. Mine were rusted too - I ended up pounding a really long screwdriver into the dead screw and just going really gently - then replacing the screw and plastic insert afterwards.

 

Not saying it's impossible but it'd be a truly awful job. Personally I'd snap off the middle mount from the slam panel before doing it that way.

 

Stone

[Ruggy 10]

I'll figure it out, somehow!

 

I'll take the passenger side reflector (the duller one).

 

PM me your PayPal details and I'll get £15 over to you mate.

Cheers.

[mrginge 0]

Money sent for dipstick,engine cover,rear upper brace and bmc hose. Cheers.

[Ruggy 10]

Reflector received, excellently packed and in 1 piece!

Cheers mate

[Stonejag 10]

Awesome, glad I could help :)

[Stone0311 0]

I'll take the chrome strut brace, cheers. Pm sent

[Stone0311 0]

Received with thanks. Cheers

[ProdigalSon 1]

Hi Stonejag,

 

Do you have the left (passenger) side headlight reflector, and is it in reasonable condition (shiny and not dull/yellowed)? If so, I'm interested.

 

Cheers!

[pauly2850 0]

Do you still have the blackberry rear bumper?

[Cacokicksass 10]

Don't suppose you have any front and rear suspension parts?

[Bs6VR6 10]

I'll take the mocal and associated gubbins, would you take £90, money sat here, ready to go?

[M15 VW 0]

Hi, has the scuttle cover gone?

[Stonejag 10]

No, the scuttle cover's still here.

[geoffersmaher 10]

Hi there. Do you still have the right hand headlight. If so please pm me. Many thanks. Geoff

[Stonejag 10]

Still available, PM sent.