Will.I.Dub 11 Posted April 17, 2015 Were all 2 litre valvers late type wider wings, center higher bonnets, bumper, fogs, indicators and all G60s type early like the 1.8 16v? If so are the 2 litre the same front as the VR?? Quote Share this post Link to post Share on other sites
Sean_Jaymo 0 Posted April 17, 2015 If it had 5 stud wheels it was a late car if not it was early. All G60's are early. There was a tiny overlap where the very first VR6 cars had early interiors and late bodies and running gear. Quote Share this post Link to post Share on other sites
bristolbaron 11 Posted April 18, 2015 If it had 5 stud wheels it was a late car if not it was early. All G60's are early. There was a tiny overlap where the very first VR6 cars had early interiors and late bodies and running gear. That's not very true! Only VR's are 5 stud and late G60's did have facelift exterior, early interior. Quote Share this post Link to post Share on other sites
dragon green 5 Posted April 18, 2015 Rule of thumb,four cylinder cars are four stud wheels Quote Share this post Link to post Share on other sites
Dox 23 Posted April 18, 2015 Henny's old g60 I broke had early bumpers and interior, late bonnet and wings. A 20 year old car could be fitted with any combination by now, id bet there's a few with one early and one late front wing? Quote Share this post Link to post Share on other sites
JMC 0 Posted April 18, 2015 My G60's J reg and had late front wings and bumpers. Was originally an early interior though (before I swapped in late door cards). Quote Share this post Link to post Share on other sites
clumpy1 11 Posted April 18, 2015 My originally G60 which is now 5 stud 305mm Cupra r there is a lot of options it could be. Quote Share this post Link to post Share on other sites
GreenRado 10 Posted April 19, 2015 Rule of thumb,four cylinder cars are four stud wheels My mk5 golf gti is a 4 cylinder and has 5 stud wheels ;) Quote Share this post Link to post Share on other sites
sankysvr6 0 Posted April 19, 2015 All G60's are early interior, but the exterior can be or early or late from the factory. Quote Share this post Link to post Share on other sites
GrahamU 6 Posted April 22, 2015 My old 91 J plate was all early Quote Share this post Link to post Share on other sites
Will.I.Dub 11 Posted April 22, 2015 So running gear aside would it be correct to say that '93 and later 2.0l valvers have the same front as VRs? Quote Share this post Link to post Share on other sites
diarmaid16 1 Posted April 22, 2015 Yes, apart from the grille badge Quote Share this post Link to post Share on other sites
Dox 23 Posted April 22, 2015 The front panel of the 4 cylinder cars isn't suitable for the VR6 and vise versa. Wouldn't it be easier if you say exactly what you want to do? Quote Share this post Link to post Share on other sites
Will.I.Dub 11 Posted April 22, 2015 The front panel of the 4 cylinder cars isn't suitable for the VR6 and vise versa. Wouldn't it be easier if you say exactly what you want to do? Thanks for all the replies, I have a late 2.0 valver that needs some front end work and just figuring out from what cars I can scavange body parts Quote Share this post Link to post Share on other sites
