iceviolet 0 Posted June 21, 2015 Job Lot Vr6 Engine Parts - Garage Clearout Job lot of VR6 parts ? Garage Clear Out! Right, had to clear out my parents garage and get rid of all my spares. I had planned to build another vr6 but that aint happening now. There are some good parts here and could be helpful if doing a rebuild yourself or thinking of building a spare vr6. Here?s a list of what?s there: ABV Block - Good crankshaft and lower timing gear still installed. Bores are worn on this block so would be ok for a re-bore. I left the crank in place on this to prevent it from getting damaged and It has been oiled periodically to prevent any rust from building up on it. Oil pump had only done a few thousand miles. AAA Bare Block ? Ideal to have cleaned up and machine, bored out to take the Corrado pistons. Corrado 2.9 Pistons and Rods ? All were measured a while back and are all good and within tolerance. Cylinder Head ? Complete with camshafts. Was rebuilt and fitted for a few thousand miles on my old engine. Would benefit from a strip down and clean or full re-furb. Spare Crankshaft ? Needs refurb. 3 Flywheels - Surface rust Engine Wiring Loom ? Complete Loads of HT leads. Coolant hoses. 12 injectors ? ideal for re-furbing CCM Code gearbox from mkiii golf Golf Intake Manifold 2 Aux Belt Tensioners 2 dipsticks, water pump, timing chain engine covers, crank pulley, sprockets, lower intake manifolds, a few engine sensors, starter motor, brackets and lots of bolts and clips etc. What you see in the photos is what you get! and more! The two blue boxes are very sturdy and very handy are included in the sale ? probably worth ?20 on their own! There will be some more Corrado parts added too which are not in the photos, these are at my house, I cant remember exactly whats there but I know there is a vr6 master cylinder, and servo, maybe an alternator and some engine sensors. 3 brand new genuine sets of piston rings. Will update when I dig them out. Need all this gone sharpish, Don?t know what to price this lot at so let?s say ?100 OR Best Offer! Buyer must collect ALL parts, not just the best ones! Thanks, Sam List Date: 6/21/2015 Location: West Yorkshire, United Kingdom For more info, click here to view the original listing: Job Lot Vr6 Engine Parts - Garage Clearout -------------------------------------- On Sale For: ?100.00 (Local Pickup Only) -------------------------------------- Mobile friendly version: Job Lot Vr6 Engine Parts - Garage Clearout Go Mobile: Download the free Panjo iOS app now! Quote Share this post Link to post Share on other sites
lilfuzzer 1 Posted June 21, 2015 Ah sam will take if can get down mate Quote Share this post Link to post Share on other sites
iceviolet 0 Posted June 21, 2015 Ah sam will take if can get down mate Hi Chris , Can you get down before Tuesday at all???? I'm going away for 2 weeks on wednesday that's all. Cheers, Sam Quote Share this post Link to post Share on other sites
lilfuzzer 1 Posted June 21, 2015 not a chance before tuesday mate unfortunately will speak to a friend! Quote Share this post Link to post Share on other sites
VAG-hag 0 Posted June 21, 2015 sharp!! Man has to be quick to beat fuzz!! :) Quote Share this post Link to post Share on other sites
VAG-hag 0 Posted June 22, 2015 Sam can we arrange collection after you return? I'm not too far from you but struggling to arrange collection prior to Tuesday mate. Quote Share this post Link to post Share on other sites
iceviolet 0 Posted June 22, 2015 If nobody can come collect by tomorrow then we can arrange collection when I get back no problem. Quote Share this post Link to post Share on other sites
VAG-hag 0 Posted June 22, 2015 Happy days. Consider it sold. I'm away from tomorrow too mate.... Will pick up with you later .Cheers Quote Share this post Link to post Share on other sites
Timbo 0 Posted June 22, 2015 (edited) Maybe I can buy the cylinder head off you lilfuzzer? ;) (Or whoever ends up buying it.) Edited June 22, 2015 by Timbo Quote Share this post Link to post Share on other sites
lilfuzzer 1 Posted June 22, 2015 Sam can we arrange collection after you return? I'm not too far from you but struggling to arrange collection prior to Tuesday mate. What he said! Quote Share this post Link to post Share on other sites
iceviolet 0 Posted June 22, 2015 I will let you know when I'm back. Lilfuzzer Chris did say he would take it first so I think he will get first dibs??? If not you will have to fight it out between yourselves! First come first served! Quote Share this post Link to post Share on other sites
lilfuzzer 1 Posted June 22, 2015 no problem mate Timbo I am sure Chris will pass the head to you. Quote Share this post Link to post Share on other sites
VAG-hag 0 Posted June 22, 2015 No problem Sam cheers. Timbo pm redborbet he has a head fs ;) Quote Share this post Link to post Share on other sites
Timbo 0 Posted June 26, 2015 Got one off StoneJag; thanks though! Quote Share this post Link to post Share on other sites
Ryebeck 10 Posted July 1, 2015 do have a set of leads for a 16v ? there the 90 degree ones ? Quote Share this post Link to post Share on other sites
iceviolet 0 Posted July 1, 2015 do have a set of leads for a 16v ? there the 90 degree ones ? No these are all from a vr6 unfortunately Quote Share this post Link to post Share on other sites
VAG-hag 0 Posted July 1, 2015 Sam give me a shout when you are home from holiday and I'll come collect mate Quote Share this post Link to post Share on other sites
unclean 10 Posted July 5, 2015 Any chance I could nab the head from you VAG-hag? Quote Share this post Link to post Share on other sites
iceviolet 0 Posted July 26, 2015 Sorry these are gone now! Sold! Thanks Quote Share this post Link to post Share on other sites
VAG-hag 0 Posted July 26, 2015 Any chance I could nab the head from you VAG-hag? No mate sorry. Quote Share this post Link to post Share on other sites
unclean 10 Posted July 27, 2015 No problem, got mine rebuilt in the mean time :smug: Quote Share this post Link to post Share on other sites
