robrado974 1 Posted February 18, 2018 I just want to check with you chaps that H4 472’s are the correct bulbs to fit . A mate put these in for me last week as I damaged my thumb badly with a Stanley knife. I went karting yesterday and drove back in the dark , I put the full beam on and found out I don’t have it . It wasn’t a pleasant drive home . Sent from my iPhone using Tapatalk Quote Share this post Link to post Share on other sites
Mystic Rado 0 Posted February 18, 2018 Yep, the main bulbs are H4s, the spots are H3. Something like the Philips Xtreme Vision +whatever% work well for me. If the wiring loom's stock I'd start with the fuses. If you're running an uprated loom then check the fuses in the loom as well and the relays, quite often they're not very well weather proofed and fail after getting wet. Quote Share this post Link to post Share on other sites
robrado974 1 Posted February 18, 2018 Yep, the main bulbs are H4s, the spots are H3. Something like the Philips Xtreme Vision +whatever% work well for me. If the wiring loom's stock I'd start with the fuses. If you're running an uprated loom then check the fuses in the loom as well and the relays, quite often they're not very well weather proofed and fail after getting wet. Thanks mystic . I do have the up rated loom , I will do some checking . Sent from my iPhone using Tapatalk Quote Share this post Link to post Share on other sites
robrado974 1 Posted February 18, 2018 Thanks mystic . I do have the up rated loom , I will do some checking . Sent from my iPhone using Tapatalk The fuses are fine , not sure how to check the relays though?. Sent from my iPhone using Tapatalk Quote Share this post Link to post Share on other sites
Dox 23 Posted February 18, 2018 Swap them over, if you get main and no dip you have a relay problem. Fuse for NSF main beam in the fusebox OK Quote Share this post Link to post Share on other sites
robrado974 1 Posted February 18, 2018 Swap them over, if you get main and no dip you have a relay problem. Fuse for NSF main beam in the fusebox OK Thanks dox Sent from my iPhone using Tapatalk Quote Share this post Link to post Share on other sites
robrado974 1 Posted February 18, 2018 Thanks for the help chaps , I think this is the problem. . Where do I get a new one ?. Sent from my iPhone using Tapatalk Quote Share this post Link to post Share on other sites
1xshaunx1 27 Posted February 18, 2018 That’s annoying me and it’s not even mine Quote Share this post Link to post Share on other sites
robrado974 1 Posted February 18, 2018 That’s annoying me and it’s not even mine Sent from my iPhone using Tapatalk Quote Share this post Link to post Share on other sites
robrado974 1 Posted February 18, 2018 Now the fuse keeps blowing Sent from my iPhone using Tapatalk Quote Share this post Link to post Share on other sites
Cressa 44 Posted February 18, 2018 Pull all the knackered relay out and see if the fuse stays in. Then take the defective relay to any automotive supplier as the picture on the side will be the type of relay. Nothing fancy about them, just check the pin layout is the same Sent from my SM-G900F using Tapatalk Quote Share this post Link to post Share on other sites
robrado974 1 Posted February 18, 2018 Pull all the knackered relay out and see if the fuse stays in. Then take the defective relay to any automotive supplier as the picture on the side will be the type of relay. Nothing fancy about them, just check the pin layout is the same Sent from my SM-G900F using Tapatalk Yes . It’s basically what Rog told me to do . I think it’s water ingress . I’ve sprayed it with contact cleaner and left it for now as it’s dark . I may as well replace the other two relays as well . Thanks Cressa . Sent from my iPhone using Tapatalk Quote Share this post Link to post Share on other sites
Jon_vr6 1 Posted February 18, 2018 Yes . It’s basically what Rog told me to do . I think it’s water ingress . I’ve sprayed it with contact cleaner and left it for now as it’s dark . I may as well replace the other two relays as well . Thanks Cressa . Sent from my iPhone using Tapatalk Put in a box to stop this happening. Sent from my SM-G930F using Tapatalk Quote Share this post Link to post Share on other sites
robrado974 1 Posted February 18, 2018 I will do Jon Sent from my iPhone using Tapatalk Quote Share this post Link to post Share on other sites
