markcunningham

I think it could be either a leak in one of the lines or one of the actuators in that door is not working. I don’t remember if the boot uses one to lock the rear or not. Sent from my iPhone using Tapatalk Pro

Check your TPS as well. Your way better than mine. One day it just decided to hesitate majorly and still haven’t figured out what’s causing it. TPS is new and disconnected. Sent from my iPhone using Tapatalk Pro

I have an extra trans brace for anyone that wants to keep that dreaded wheel hop tamed. This one I reconditioned in double black enamel. No rusty parts here! I also have the rear mount(stick) with no cracks in the rubber. That will also get a once over. $45-brace $28 -mount

Ok I appreciate your input and will take this advise. Sent from my iPhone using Tapatalk Pro

Well there in limbo right now and not wired in just yet. I just them plug and play according to the Bentley wiring diagram. Make shift wired to factory connectors. Only one side was dim Front to rear. So you say I need a PWM?! What is that and where can I get it. The other issue was no stop lights while in on position but while off I had stop lights. Had no center or third light. Sent from my iPhone using Tapatalk Pro

90-96 VW CORRADO EURO LED TAILLIGHTS - CRYSTAL CLEAR/RED https://www.amazon.com/dp/B0711M46M5/ref=cm_sw_r_cp_api_aLeUzb0A23AV8 Sent from my iPhone using Tapatalk Pro

Amazon. Led crystal clears/red bottoms. Really nice but wiring diagram for the lights they didn't come with and yes asked seller to no avail. Most of these after market they tell you to have professionally installed of course to cover the A Sent from my iPhone using Tapatalk Pro

Just bought new tail led lights that seem to be integrated, meaning resistors on a pc board I believe. Has anyone bought this setup and how they installed them?! With lights off I have right turns normal and left are dim. Have stop leds when lights off but not while switched on. Same brightness off or on but no stops. Don't have center lights or third light. Thought maybe there an adaptor or something Sent from my iPhone using Tapatalk Pro Sent from my iPhone using Tapatalk Pro

Just bought new tail led lights that seem to be integrated, meaning resistors on a pic board I believe. Has anyone bought this setup and how they installed them?! With lights off I have right turns normal and left are dim. Have stop leds when lights off but not while switched on. Same brightness off or on but no stops. Don't have center lights or third light. Thought maybe there an adaptor or something Sent from my iPhone using Tapatalk Pro

I bought a Euro lighting harness for my ecodes and there is only one three pin OBD1 square plug for the turns. Has anyone wiring up from the one plug to both turns plugged in?! I have and extra pigtail I can use with a length of wire to go to the other side. Sent from my iPhone using Tapatalk Pro

No dash indicators and all turns are reversed. Push up to turn right and both front and rear are blinking on the left side and right side the same.

Well that's one way to look at it. I''l take the second option. Flash Red VR6T 600HP Schimmel Built

Ok so I bought a 92' VRT corrado and the turn signals are backwards?! You know, gonna turn right and flip the lever up and the signals are flashing left?! any help with that would be great.

Why not go VRT to the tune of 600hp? I would guess cheaper to do the 24V

There are 3 temperature senders in the thermostat housing. Looking from left to right: Yellow, 4-pin plug. VAG part number 701 919 369 D, O-ring N 903 168 02 Coolant gauge, fan control unit and aux water pump (always there) Switches on: 101-107 C (214-225 F) Switches off: 94-100 C (201-212 F) Blue, 2-pin plug. VAG part number 025 906 041 A, O-ring N 903 168 02 ECU (always there) Black or brown Black, 2-pin plug. VAG part number 357 919 369 F, O-ring N 903 168 02 For a late-spec 3 stage fan control or auto transmission. Switches on at around 112 C Brown, 4-pin plug. VAG part number 357 919 369 E, O-ring N 903 168 02 Only if you have AC. It is a 3-stage sender - VAG part number 357 919 369 E