-
Content Count
435 -
Joined
-
Last visited
Posts posted by Stone0311
-
-
Thanks for help folks
Now sourced a near mint wing but had to buy the os as well
Now have 3 early wings for sale that are good but need a little attention
Sent from my SM-S901B using Tapatalk -
Sounds good, pm sentI've got a straight black one with some light surface rust on the inside of the arch but it's soild enough and straight.
Sent from my SM-S901B using Tapatalk
-
I've got 2 with light damage but hoped to find a really clean one rather than fix one
Thanks anyway
Sent from my SM-S901B using Tapatalk -
Looking for a clean NS early wing if anyone has one tucked away
Sent from my SM-S901B using Tapatalk
-
Hi@fendervg,
Yeah tried that and it seemed to shift most/all of the air, I'll give it another go and see if it'll push it around
Sent from my SM-S901B using Tapatalk
-
Hi all, having an odd issue with the PS on my G60 if anyone has any ideas?
Just finished a rebuild and all running sweet but PS failed to come back to life, not sure of the pump condition as I had never run the engine before now.
Replaced the pump and fluid and when I started it all looked good, pump was making the familiar sound and steering felt good - ran it for about 10mins and looked to have got all the air out, pump seemed to settle and then nothing... no PS again
Anyone have any ideas?
Using Febi 06161 PS fluid, noted as G002 000 compatible; steering rack was original to the car and working prior to transplant
Sent from my SM-S901B using Tapatalk
-
Looks great m8, I've got this on my to-do list once the engine is done.
What does a good late interior go for these days?
Sent from my SM-S901B using Tapatalk -
Feels appropriate to drop the movie quote...."ITS ALLIIIIVVVEEE"
Few odd leaks, 2nd turn of the key and it runs and idles
Another G60 back to life
Sent from my SM-S901B using Tapatalk
-
Thanks @James. Just the earlies then
Sent from my SM-S901B using Tapatalk -
Looking nice m8
Sent from my SM-S901B using Tapatalk -
Fingers crossed
Finishing some electrics this weekend, fluids next week and then turn the key for real
Sent from my SM-S901B using Tapatalk -
No worries
Has anyone got access to an early and late dash and can confirm they are the same or different?
Sent from my SM-S901B using Tapatalk -
Hi all,
Looking at some options for remanufacture of the support bar that directs the fins on the rotary insert for air, all of mine seem to be deteriorating faster than anything else and considered the part could be 3D printed.
Is this issue common or is it only mine? The original material looks to be a very soft plastic, on mine the retaining holes have collapsed - see photo
Thinking to do a set and replace all of them with a new part, not sure if later ones are the same but could probably do a set for them if different.
Any thoughts? Just a feeler at the moment
Thx
Sent from my SM-S901B using Tapatalk
-
Just finishing a G60 transplant and got a few quick Qs if anyone can assist:
I've got no carbon canister so can the by-pass valve be left disconnected from the vacuum system? (See pic)
With no carbon canister does the spare port on the back of the TB need blanking? Or could I use it for the gauge MAP vacuum?
What should connect to the spare port on the brake servo check valve? (See pic)
For note boost return deleted
Thanks
Sent from my SM-S901B using Tapatalk
-
Thanks for the heads up
Sent from my SM-S901B using Tapatalk -
Fuse on the factory ground?Good tip
I would advise to put a fuse on that brown wire. Cars have caught fire in and the past as when the switch packs in it can send heavy amps through that wire and it fry’s the back of the dash unless you can kill the power. I have experienced this almost disaster on 2 previous Corrado’s. It won’t happen to my current one though.
What size did you put in?
Sent from my SM-S901B using Tapatalk
-
Sure plenty have done this before but if not details attached for a simple 'lights on' alarm using 58e (Grey) and x (black/yellow) from the back of the headlamp switch.
I used a 12v intermittent beeper for the alarm
Sent from my SM-S901B using Tapatalk
-
Thought I'd share the milestone
14.5yrs (how time flies) since the running 16v was removed, this morning the G60 was turned over for the first time, feels like a step closer to running/driving after so long collecting parts and assembly.
Few bits and pieces to do and then it'll be fuel in too see if she'll idle, then it's off to JMR at the end of July for setup
Sent from my SM-S901B using Tapatalk -
This is the other end if it helps
Sent from my SM-S901B using Tapatalk -
Hi all,
Can anyone with a G60 check the nearside front corner of their engine bay for this plug - need to know what it connects to?
On mine it's not part of the main loom but has 2 external plugs above the fuse box. Thx
Sent from my SM-S901B using Tapatalk
-
Done... 2 bits of 3x2 on the counterweights of number 2 and 3
Once I'd got over taking the oil out I'd just put in it was done in 20mins
Sent from my SM-S901B using Tapatalk -
Thanks@Cressa, was starting to wonder if that was the next option
Did you wedge between the crank and the casing?
Sent from my SM-S901B using Tapatalk -
Morning all,
Has anyone got any suggestions on getting the half turn on a G60 crank bolt? Assume valvers etc must be similar
I've tried most logical options from across forums/web but am just under 90degs with a 1m 3/4 bar and get fet anymore - car is particularly jacked up with someone sat in with a foot on the brakes and in gear but now it's just turning the small amout of slack across the drivetrain
Read about dropping the sump and timber wedging the crank or using impact but not resorted to these yet
Any suggestions or tricks I've missed??
Thx
Sent from my SM-S901B using Tapatalk
-
In need of a G60 gauge cluster, needs to be '91 onwards - easily identified by arrows for indicators
Ideally need the loom also
Thx
Sent from my SM-S901B using Tapatalk
Forum Discount
in Other Discounts
Posted
Hi All,
If anyone is looking for a caliper rebuild and powdercoat I can't recommend these guys enough, had both mine done on separate occasions and the finish is excellent .
They've agreed 10% discount and priority turnaround for forum members .
Use code NOTSA10
https://m.facebook.com/story.php?story_fbid=696787472473558&id=100064269332025
Sent from my SM-S901B using Tapatalk