Stone0311

@Keyo PM Sent Sent using Tapatalk

Hi@Keyo, exactly what I'm after - shame I was up your way few weeks ago; I'll have a look at getting it collected if that's OK? [emoji106] Sent using Tapatalk

Hi All, Weighing up trying to restore mine or just source another early passenger front wing, if anyone has one around let me know. There's a few on flebay but would rather give money to someone here 👍

Reaching the end of the shopping list of parts, but still a few outstanding if anyone has any around: 357 711 188 A - Shifter Balance Weight 191 199 322 A - Body Balance Weight 037 133 231 D - G60 Inlet Manifold Support Bracket Thx

All fresh fluids for mine, feels like a milestone [emoji320] Sent using Tapatalk

@daves16v I think that's exactly what I need - as per pic below [emoji106] I'll drop you a pm Sent using Tapatalk

Thanks Dox, ive got the square nut - it's the rectangular bush in the end of the cable that I need. Although it's doesn't look like mine had the balance weight so will be looking for one of them also Sent using Tapatalk

Hi@Keyo, thanks - couldn't find any part numbers but I was using 7Zap Do you have any details? Sent using Tapatalk

The only pic I have is from thier website below (part also in diagram with green arrow) Also missing this bolt from the shifter tower if anyone has one - some odd pitch m7 thread from what I can tell (orange arrow) Sent using Tapatalk

Hi@Dox, i don't - they have suggested a fright forwarding company but not sure what cost this would attract? Sent using Tapatalk

Hi All, Looking at sourcing replacement bushes for my 02a gearbox selector arrangement - in particular I'm after the square bush for the cable end to selector. Struggling to find many sources if anyone has any suggestions? Used dieselgeek for these parts in the past but will no longer ship small orders to the UK due to the new vat rules, to justify the shipping could run a sort of group buy if anyone else wanted bushes or thier super slider for the shifter mech? https://dieselgeek.com/search?type=product&q=Corrado* Sent using Tapatalk

Thanks@VEEDUBBED [emoji106] Sent using Tapatalk

Hi@Cressa, Found pics of 861955245 which is number 32, can't find anything on 33 (part no. 037 145 290a) Sent using Tapatalk

Hi All, Hoping someone can assist - trying to track down the 2parts highlighted on the attached; I may have them but not sure what they look like? If anyone has a photo or could take one that would be appreciated [emoji106] Sent using Tapatalk

Hi All, Trying to clear some space so emptied some boxes, parts below to go - ive tried to gauge price but its not easy; let me know if im miles off. Thx Prices + P&P, can supply photos if required - just let me know Lowring Springs 35/40mm Circa 3k mi, paint peeling - can pcoat £25.00 G60 Air Box Top 535 129 607A £30.00 K&N Panel filter for G60/16v with recharge kit £30.00 16V Radiator, Cowl and Fan (2k mi, 5yrs old) OEM Equiv rad £125.00 16v / G60 Rear Engine Mount 357 199 354 £30.00 OEM Front Shocks (Monroe) £40.00 16V Inlet Manifold Lower Section £35.00 G60 Charger Belt Tensioner £40.00 Shifter Bracket 357 711 789 B £10.00 VR6 Front Engine Mount 1H0 199 273D £40.00 16V PSteering Reservoir with bracket 191 422 371 C, 535 422 845 £30.00 16V PSteering Reservoir Polished Stainless Cover Custom £20.00 Debadged 3Bar Grill £25.00 16V Caliper Carrier £25.00 Early Arch liner (Driver Side) £10.00

The one above is the same as my g60 one? Sent using Tapatalk

This one? Sent using Tapatalk

Thanks@Bauhaus , it's a good start - I'll take any more pics if people have them [emoji106] Sent using Tapatalk

Yeah, went with mocal rubber same diameter as stock all the way through. Most of the studs on the floor pan that take the fuel line clips were dying/dead so I swapped them out and welded 6mm stud; hose clips are for hydraulic hose but work lovely Sent using Tapatalk

Hi@Bauhaus, yes gone for a oem equivalent in tank pump to retain the original housing and used motorsport g60 filter and pre filter Sent using Tapatalk

Hi, looking for a few photos of pipework/wiring arrangement in the engine bay either side of the head if anyone has any, trying to follow stock layout where possible [emoji106] Thx Sent using Tapatalk

Hi all, update on progress over the last few mnths: Fuel pump assy mounted New fuel lines run New brake lines run incl new compensator Tunnel heat sheild fitted, exhaust installed Front discs changed for drilled/grooved to match rear with EBC red stuff pads Front subframe re-removed and pcoated due to issues with the finish, wish bones re-repainted also Battery relocated to boot Sent using Tapatalk

Sorted thanks to@VEEDUBBED [emoji106] Sent from my VOG-L29 using Tapatalk

Thanks Andrew, pm sent 👍

As above, in the market for a pair of late front indicators if anyone has some around 👍 Thanks