Bluxie

It looks good :) you can reserve me a demo ride once it's done ;)

i hope you can understand the german a bit?? i'm going to make a translation.. and a pictorial on my site. For the tacho signal you can also use your hallsender signal. or pin 24 on the digifant likr the document say's.

i found it :D only not in english :), maybe i'll make an english version with pics once i do our G60 ;) Document

I've done this conversion on my 16v corrado.. had a german document with all the steps that where needed, can't seem to find it anymore though :(

Just mail him about it, i bought on the german ebay twice already, most of the time they are supprised when i ask them about it. Seems like the only to germany is standard ebay... good luck finding a good charger :)

you have to be faster if you want to be the first! A dutch corrado driver just put those wheels on his car ;)

The engine has been taken out for a full rebuild! the belts are new, and also the internals of that engine, the valve cover has been sanded down and painted again. The alternator has been taken apart and painted... check my website for the pics on that project: http://users.pandora.be/blux/G60/G60.htm edit: added URL

before after

Here is what is use to check what would be ok... it's beter to see for yourself thant to listen to what others tell you to do ;) http://www.miata.net/garage/tirecalc.html

215/35 17" will be pretty close too, but not much brands and models in 35 series tyres i got TT wheels to, nee to put them on and do a 5x100 conversion teaser pic: http://users.pandora.be/blux/temp/imm017.JPG

You need both parts, i payed something around 100 euro for it in germany.

I have tried to order a blank on from my VW dealer here in belgium but they where not allowed to sell it to me, so i went to germany an bought one there, a blank key brand new. I ordered a Transporter one (T4) they have a AH key profile like the corrado does, all the other mk4's have lasercut key's The part #'s for the T4 one: 7D0 837 246 D 01C key and switchmechanisme 7D0 959 753 C the button part The link shown on top here is real easy, you don't need it new, a 2nd hand will do, lasercut or AH profile key's are not an issue with this aproach! For putting your alarm remote internals into the switchblade key, you will have to look for a system that is small enough to fit in there, the 12v batt someone said here will never fit in there ;)

I don't think that is Zarman his corrado, since the properties of the pic show a filename "JERRY4.jpg" ;)

@stormseeker: http://metku.net/index.html?sect=view&n ... /index_eng Usefull page to calculate what resistor you need to use

Real nice one, i was looking for A 3rd brake light mod like that, but i couldn't find a 3rd brake light that would be small enough to fit... Does it say a type? only hella 3rd brake light i've seen out here is real big and nasty looking :?