Southie

If you can get it higher than the sub-frame then i should hope that you wont be bashing it!, there is always the option of getting a short oil pick-up and shortening and strengthening you steel sump There is enough clearance to "puck" the front mount, although i think you will need to remove the OEM bonnet insulation

These are still available at VW if you have no luck on here

When did these become discontinued ? must have been very recent

Just to be clear, these are 4x100 ?

You could also try the screw type bolt extractors Like these

http://www.halfords.com/webapp/wcs/stores/servlet/product_storeId_10001_catalogId_10151_productId_565257_langId_-1_categoryId_165611 I have one of these, fits perfectly

Id like to get on and fit mine this weekend, any chance you send me a copy of the instructions ?

Welcome to the forum Link to the Buying Guide

Thanks, it was just out side lower froyle on my way home The wheel came from German eBay, i believe they are quite "rare" but can be had if you keep a look out Sent from my iPhone using Tapatalk

turbomagikz That looks very clean, gota love a white C :thumbleft: No Updates, but a nice pic from today Shame its only a phone pic

Ive just read a very worrying article... "Great Britain is facing a bacon and sausage shortage" http://www.huffingtonpost.com/2012/09/24/bacon-sausage-shortage_n_1909609.html Not good people!, The time for action is NOW!

What type are you looking for ? Think i have a spare 5 pin somewhere

Thanks All Yes, its a chiped key with light (think they all have that tho don't they ?) Just gave them my chassis number and it turned up within a week (cut obviously), it cost thirty something ponds with a small discount, not too bad IMO considering what VW charge for some Keys or Corrado items

another small update, fitted the Polyurethane engine mounts from Jays group buy the front one went really easily but it was too good to last and i snapped the top bolt inside the rear mount :bonk: so got a new cheap one from GSF as the mounts were going to be changed anyway, and i finally got rid of the old cheap air filter that was fitted when i got the car and replaced it with a nice BMC CDA Ohh and a new spare key :shades: which VW shorted out surprisingly quickly and at a reasonable price Steve

His company ebay account has an additional contact number 08446637578 http://www.ebay.co.uk/itm/Reliant-RIALTO-SALOON-HSE-ORANGE-/221119252894?_trksid=p5197.m1992&_trkparms=aid%3D111000%26algo%3DREC.CURRENT%26ao%3D1%26asc%3D14%26meid%3D2104266053911697514%26pid%3D100015%26prg%3D1017%26rk%3D1%26

Hi, Ill take it, will need it posting Thanks, Steve

There does seem to be some confusion on the seller part as the listing title says 6.5j ...

Little update, had a very annoying missfire over the last couple of months which turn out be be a wiring problem but its sorted now :cheers: ended up getting a few new bit to eliminate causes of the misfire, They needed replacing anyway, and together with some freshed up engine plastics have smartened up the engine a little Breu Coil pack OEM red HT leads OEM NKG Plugs New painted engine plastics OEM 3 Slat grill and silver badge Lupo wipers and aero blades New black scripted floor mats Oh and a Nothelle 350mm wheel Steve

As above, looking for a standard VR6 air box and ideally a filter Thanks, Steve Sent from my iPhone using Tapatalk

Yeah, i think its almost the same spec as yours it also has the CD auto-changer, audio controls on the steering wheel with cruise control, Climate control, Auto dimming rear view mirror, just doesn't have the leather Don't think you would have too much trouble selling yours privately if you wanted to go down that route, there were a couple that i wanted to view but had sold before i got there, so there must be a bit demand for them

Thanks for everyone’s comments After a stupid amount for driving around i finally have one! Ive done almost 400 miles in the last two days and enjoying it, Its also showing about 34mpg, so pretty happy with that so far aswell Two owners from new 68k miles with full service history from PSI Tuning New discs and pads all round New tyres all round Just been serviced Only thing that lets it down is the alloys, which have some quite noticeable lacquer peel in places, oh and no leather, but the cloth interior is still quite nice and its clean I might look into uprated ARB in the future but im happy with it for now

I think the pressed plates look great and have used them for the passed year (sold as UK legal) with out any hassle I had a set of German pressed plates (clearly not legal) on my old Corrado for about a year and they did attract some unwanted attention form the police on three occasions, but only once was made to change them back which cost £5 at the MOT station

Spotted a nugget C around hook a couple of times this week, anyone on here ?

I cant comment on its longevity, but ive recently purchased Beru one for £145 delivered, I believe VW still do them as they quoted me £344 for one when i was looking Oh and the Beru looked better made then the one it replaced (not sure if it was original or not)

Any details on that ?