Dutch24V 0 Posted June 12, 2006 ...mine is in Dutch and doesn't have up-to-date prices. I've just had an email form my local stealer with the cost of some parts I need and I'd like to check them against UK prices if possible (considering a clutch over here is 407 euro compared to £150) ?? Dutch Quote Share this post Link to post Share on other sites
cymru-corrado 0 Posted June 12, 2006 post up part number and i can get up to date price for you. Quote Share this post Link to post Share on other sites
Tempest 0 Posted June 12, 2006 considering a clutch over here is 407 euro compared to £150 :shock: I normally have found that stealers in Germany (OK, that's Germany, not the Netherlands) are usually cheaper, not by far, but certainly cheaper. I'd therefore try the odd German parts dealer or so. Tempest Quote Share this post Link to post Share on other sites
Dutch24V 0 Posted June 13, 2006 cymru-corrado, Thanks mate, I will post the more expensive parts for comaprison if you don't mind? Tempest, The Netherlands is the new rip-off country in Europe!! Probably cheaper in Germny true, but I don't speak or understand any German :( The parts I'm interested in are: 24v (BDE) Charcoal Canister purge valve: 1j0 906 517 g 85,20 (Anyone got one second hand??) VR6 (ABV) thermostat housing+thermostaat +waterpipe+waterpipeseal: +/- 145.00 VR6 (ABV) Rear engine mount: 1h0 199 262 k 77,23 VR6 (ABV) Front engine mount 3a0199402 58,19 24v (BDE) Lambda's before CAT 2x 163.00 after CAT 2x 198,73 These prices are in Euro's btw. Dutch Quote Share this post Link to post Share on other sites
kongo127 0 Posted June 13, 2006 I cannot run etka on my notebook because of it´s display resolution... Is there a way to run etka on 1024x768 ??? Quote Share this post Link to post Share on other sites
dinkus 10 Posted June 13, 2006 kongo127 - nope :( Quote Share this post Link to post Share on other sites
Taggart 0 Posted June 13, 2006 I cannot run etka on my notebook because of it´s display resolution... Is there a way to run etka on 1024x768 ??? kongo127 - nope :( Bummer, I don't have a desktop no more :( Quote Share this post Link to post Share on other sites
Supercharged 2 Posted June 13, 2006 You can but you need to use a virtual screen res and scroll about or use an external display as long as your graphics card supports the res. Quote Share this post Link to post Share on other sites
cymru-corrado 0 Posted June 13, 2006 will get some prices on them tmrw for you.... Quote Share this post Link to post Share on other sites
Dutch24V 0 Posted June 13, 2006 cymru-corrado, thanks mate :) Dutch Quote Share this post Link to post Share on other sites
cymru-corrado 0 Posted June 14, 2006 rubber mount 1h0199262k £63.92 retail inc vat valve 1j0906517g £69.41 retail inc vat the others i managed to write the numbers wrong was in a rush so i'll dig them out tmrw Quote Share this post Link to post Share on other sites
Dutch24V 0 Posted June 14, 2006 Thanks mate. It is strange, as some prices are far more expensive here, and others less than the UK :? Dutch Quote Share this post Link to post Share on other sites
cymru-corrado 0 Posted June 14, 2006 they vary from uk dealer to uk dealer anyway so dosent suprise me that its the same with countries Quote Share this post Link to post Share on other sites
Stan 24v 0 Posted June 14, 2006 You can use etka, as said above. Just change the screen res, but you'll only see a portion of the screen, so will have to scroll about, or display it on your TV with a video lead. Quote Share this post Link to post Share on other sites
yalan 0 Posted June 14, 2006 Or alternatively, you can use ETKA's sister package ETOS which will happily run on 1024 x 768. Quote Share this post Link to post Share on other sites
