The "Will these wheels and tyres fit" thread

[dragon green 4]

I have checked the whole thread, but can’t find the answer !
7 x 15 et 20 cars lowered on KW’s can I go to a 215 x 45
Or should I just stick with 195x 50’s ?
Original wheels are et35 (4stud car) so the extra 15mm will fill out the arches better, will they fit without rubbing

[dragon green 4]

I have checked the whole thread, but can’t find the answer !
7 x 15 et 20 cars lowered on KW’s can I go to a 215 x 45
Or should I just stick with 195x 50’s ?
Original wheels are et35 (4stud car) so the extra 15mm will fill out the arches better, will they fit without rubbing

[johnpmc22 1]

I will try again on this thread

Some advice all, i have just received a set of 16" B-star bbs ra style rims (https://www.b-star.co.uk/products/b-star-ra-wheel-silver-8-x-16) for my G60, any advice on what tyres would suit, so no rubbing on inners, with rubber RIM PROTECTORS, anyone running on these wheels or similar that can advice

maybe 195/45/16 tyres?

[_Matt_ 26]

I run 205/45/16 on 7J with no problems. It's a equivalent size to the 205/50/15 but that is over a 6.5J alloy

 

195/45/16 could work too depending on width of wheel, might look at bit stretched if a 7J 

[johnpmc22 1]

Thanks a million _Matt_ for this advise 

[g0ldf1ng3r 13]

similar to matt - ive put 205/45/16 on the 7J front modena's & then 215/45/16 on the rear 8J modena's

virtually no stretch on the 7's & just a little on the 8's

[johnpmc22 1]

Thanks @g0ldf1ng3r and  @_Matt_ , my rims are 8J '16X8 J FH2', what do u think 215/40 or 205/45 s … might get onto B star 🤷‍♂️

Edited November 30, 2023 by johnpmc22

[_Matt_ 26]

id probs go 215 with the 8J wheels. 205 are nice on the 7J

[johnpmc22 1]

Went for the 205/45/16s and I think worked out well , driving good no rubbing … thanks for the help guys 👍 including pic … it’s a bit dirty out there with the frost 

Edited December 4, 2023 by johnpmc22

[jannick 0]

can't go to page 10?

[easypops 8]

7 hours ago, jannick said:

can't go to page 10?

You need to be a paid member to access the forum fully