VR6 Lee 0 Posted May 21, 2011 (edited) If anyone has any of the following please pm me > BMC CDA induction kit for vr6 engine > Corrado gauges - oil and volts > BBS Solitude alloys x 4, got to be genuine - Can px against my BBS's but they must be minters > Full system exhaust - Miltek or jetex > Clifford Thatcham 1 alarm > Slimline radiator fans > 288mm discs > leather steering wheel - exchange plus cash for mint plastic one >Golf mk 4 rear calipers > VR6 DOHC Engine cover - All clips must be intact >Drivers side window >Drivers side window sill >Glovebox - late >288mm discs - New >ABS Pump (6 inline) Edited October 11, 2011 by VR6 Lee updating Quote Share this post Link to post Share on other sites
moneypit23 0 Posted May 21, 2011 Don't want much do you Lee? Quote Share this post Link to post Share on other sites
KADVR6 0 Posted May 21, 2011 got a full sigma m30 alarm with both fobs if you want mate. Quote Share this post Link to post Share on other sites
JayGT 0 Posted May 21, 2011 Got a BMC I might be temped to part with... if you have an original air box and cash my way.... Quote Share this post Link to post Share on other sites
Jon_vr6 1 Posted May 21, 2011 You also need a leather steering wheel Quote Share this post Link to post Share on other sites
VR6 Lee 0 Posted May 22, 2011 JayGT, KADVR6, please let me know prices etc Quote Share this post Link to post Share on other sites
lilfuzzer 1 Posted May 22, 2011 Think I have a full fuse box mate i'll take a look Chris Quote Share this post Link to post Share on other sites
hunty 10 Posted May 22, 2011 got a number plate with L33 VWS if you intrested its on one of my vr6s ideal for a lee with a volkswagon Quote Share this post Link to post Share on other sites
itsmeagain 0 Posted May 22, 2011 I have a VR6 fusebox with all the relays, its from a Golf but that shouldn't matter £30 delivered Quote Share this post Link to post Share on other sites
lilfuzzer 1 Posted May 22, 2011 I have a fusebox from a vr6 corrado I have the main board and all relays attached but the one on the top is seperate but can supply the 53 relay also £30 posted also Quote Share this post Link to post Share on other sites
emu 0 Posted May 22, 2011 would have a fully reconditioned leather steering wheel in a week or so. Quote Share this post Link to post Share on other sites
VR6 Lee 0 Posted May 22, 2011 got a number plate with L33 VWS if you intrested its on one of my vr6s ideal for a lee with a volkswagon What you after for it Quote Share this post Link to post Share on other sites
87 Jetta 16v 0 Posted May 22, 2011 I have the fusebox, from a late VR corrado. Yours with all fuses and relays for £25 posted if that helps? Thanks, N. Quote Share this post Link to post Share on other sites
VR6 Lee 0 Posted May 23, 2011 Fusebox now bought, list updated Quote Share this post Link to post Share on other sites
VR6 Lee 0 Posted May 26, 2011 anyone else got any bits Quote Share this post Link to post Share on other sites
BLCSO 0 Posted May 26, 2011 Just seen these on e-bay, and in your area. http://cgi.ebay.co.uk/VW-VR6-Engine-Plastics-Covers-Full-Set-/290569636826?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item43a74ccbda Quote Share this post Link to post Share on other sites
VR6 Lee 0 Posted May 26, 2011 Just seen these on e-bay, and in your area. http://cgi.ebay.co.uk/VW-VR6-Engine-Plastics-Covers-Full-Set-/290569636826?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item43a74ccbda Cheers bud, got my eyes on these now Quote Share this post Link to post Share on other sites
G60MAT 0 Posted May 27, 2011 I'll have a very good condition steering wheel off a late '94 car in a week or so if Emu's is too far away :) Quote Share this post Link to post Share on other sites
corozin 0 Posted May 27, 2011 (edited) I am about to break a car and can help you with : - The BMC Carbon Filter - A very special Gauge pod with Stack gauges for oil pressure and temp built into the Corrado pod (looks amazing) - A Clifford Eagle kit with remote start + fobs (but you'll need to help me remove it from the car) - Both a Momo race wheel (with boss) and a Nothelle wheel (both leather) - I will also have a Magnex stainless system available, plus a powerflow sports cat and a 6 branch manifold too if you want to do the whole system. In addition to the above I will have what may be one of the larger collections of quality parts coming off this car in the coming months as this car is (was) probably one of the most modified VR6s mechanically out there. PM me if you're interested in any of these bits, or want to ask about anything else you need as at this time I will probably have it. I havn't finalised pricing all the bits up (I did a list at the office but forgot to mail it home) but PM me and am happy to discuss requirements. The only bit not for sale is the bottom end of the engine which is knackered. Based in Bournemouth. Cheers John Edited May 27, 2011 by corozin Quote Share this post Link to post Share on other sites
VR6 Lee 0 Posted October 11, 2011 Updated on first page Quote Share this post Link to post Share on other sites
volksworld13 0 Posted October 14, 2011 hi mate ive got a drivers side window in great nick.pm me. alex Quote Share this post Link to post Share on other sites