iR6 0 Posted January 30, 2012 My one has turned up too, thanks very much! Though why do i just want to bite one?!! :shrug: Quote Share this post Link to post Share on other sites
OllieVR6 0 Posted January 30, 2012 (edited) Just a quick question....I'm sure I read somewhere that stainless shouldn't be used in load bearing applications. Are the included bolts stainless, and if they are, will they be ok for this job? I'm sure I have no reason to, but I did just want to double check. EDIT - NVM found the answer: UPDATE: I now have all the high tensile (12.9) securing bolts in my possession and the custom laser cut stainless support discs are en route to me now. The initial sample first off of the polyurethane inserts has been promised to me by Tuesday so it looks like I will have them installed for the rolling road day at the weekend. :). Quite excited :) Edited January 30, 2012 by OllieVR6 Quote Share this post Link to post Share on other sites
CazzaVR 0 Posted January 30, 2012 Thanks Jay- got mine today 8) Quote Share this post Link to post Share on other sites
sexybourbon 0 Posted January 30, 2012 Cheers j got mine today thanks for putting it all together you wouldnt get this anywer else Quote Share this post Link to post Share on other sites
winchbietch 0 Posted January 30, 2012 Got mine today thanks Jay - top man Paul Quote Share this post Link to post Share on other sites
Dan_Storm 0 Posted January 30, 2012 Mine arrived too. Thanks for organising! Quote Share this post Link to post Share on other sites
krishen 2 Posted January 30, 2012 Got mine today too. Thanks fella. Quote Share this post Link to post Share on other sites
24V Renshaw 0 Posted January 30, 2012 Excellent, they are all getting through! Yep all the bolts are high tensile 12.9 so are massively over specced! Jay Quote Share this post Link to post Share on other sites
stevef182 0 Posted January 30, 2012 Got mine today, thanks a lot dude! Quote Share this post Link to post Share on other sites
24V Renshaw 0 Posted January 31, 2012 Just a thought before people fit these, if you want it a little bit more "soft" and OEM, leave the lower rubber mount on the rear one in place and just replace the top one with the poly. But you can play around with what you like best :) Jay Quote Share this post Link to post Share on other sites
P3rks 11 Posted February 1, 2012 Fitted mine today! Well impressed with how stable the engine is, i could tell from rhe second i put it in gear.. I'm going to try the OE rubber on the bottom tomorrow and see how that fairs.. Thanks Jay.. I love them! Quote Share this post Link to post Share on other sites
24V Renshaw 0 Posted February 2, 2012 Great, glad you are happy. Like I say to eliminate a touch of the stiffness replace the lower rear part only. The front lower part will not make any noticeable difference, but you want the two top pieces to match. Not that I have done loads of experimenting LOL. Just as a note, you can use either the front or rear lower piece they are the same. Jay Quote Share this post Link to post Share on other sites
Jim Bowen 1 Posted February 3, 2012 Not got mine yet, When should i start to worry about the posty lost them? Quote Share this post Link to post Share on other sites
24V Renshaw 0 Posted February 3, 2012 Can't remember exactly what the post office quoted, think it was 4/5 days but if they are not with you by Monday I think we need to start asking questions... Quote Share this post Link to post Share on other sites
aide 0 Posted February 3, 2012 Got mine cheers Jay. You've sent me a complete set though when I only paid for the front, are you missing one, happy to return or send on to others? Quote Share this post Link to post Share on other sites
24V Renshaw 0 Posted February 4, 2012 Doh!! LOL. If you can send back what you don't use that would be great. No rush though. Cheers Jay Quote Share this post Link to post Share on other sites
tonedef 9 Posted February 4, 2012 If it turns out that this doesn't belong to anybody I could use a rear only......front is a pretty new VT already. Cheers Quote Share this post Link to post Share on other sites
24V Renshaw 0 Posted February 4, 2012 Aide, if you could post the rear parts to tonedef and I will pay your postage costs. Tonedef if you can PayPal me the cash we should all be sorted. Cheers Jay Quote Share this post Link to post Share on other sites
aide 0 Posted February 4, 2012 Yeh no problem, PM me your address tonedef and i'll sort it today. No worries over postage jay its only a few quid. Quote Share this post Link to post Share on other sites
tonedef 9 Posted February 4, 2012 Paypal payment sent to yourself Jay and a PM with postage address sent to aide. No big rush as I need a steering rack before I can get the front end put back in.......and I'm having trouble finding one at the moment. Cheers Tony Quote Share this post Link to post Share on other sites
24V Renshaw 0 Posted February 4, 2012 It all worked out in the end! Cheers guys :) Jay Quote Share this post Link to post Share on other sites
robo22sri 10 Posted February 5, 2012 Cheers Jay, I got mine was away on holiday Quote Share this post Link to post Share on other sites
Jim Bowen 1 Posted February 7, 2012 Mine haven't shown up :( I don't mind waiting a bit longer but just want to make sure i let you know in enough time that they are missing so far Quote Share this post Link to post Share on other sites
Jim Bowen 1 Posted February 8, 2012 Is anyone else missing their mounts? Or am i the only one? ---------- Post added at 10:31 AM ---------- Previous post was at 10:26 AM ---------- Is anyone else missing their mounts? Or am i the only one? Quote Share this post Link to post Share on other sites
24V Renshaw 0 Posted February 8, 2012 I will have a look at the postage details I got when I sent them and see what it says for this situation. Jay Quote Share this post Link to post Share on other sites
