'The Original' Rear Cup Holder group buy feeler.

[bristolbaron 10]

Following on from my "Hate the lack of cupholder thread.." A few people suggested i look into getting these made up.

 

Current update: I have had a sample made and it's pretty good but not perfect, please see later in the thread for full details.

Here's a pic if you can't be bother to check through!

 

I am aware that another seller has copied the idea and is making home made versions for £10 + P&P, if you are looking for a grey or beige finish I am unable to produce that so that could be an option.. however if you want black, mine will be factory produed, with stepped sides to fit McDonalds cup/Coke can/Red bull cans perfectly.

 

Please have a read through the original thread above and if you are interested please add your name to this thread. I am expecting exact costings within the next couple of weeks and production within 4-8 weeks. Again, I am aware there is now a cheaper alternative, but you can't hurry perfection!

 

1 bristolbaron

2 Marshall936

3 Critical_Mass

4 Johnny H

5 dannyboy

6 Krishen

7 _Meth

8 BILLCOR

9 redborbet

10 derbik

11 V33DUB

12 Dude VR6

13 G60 CS

14 Jim

15 EnthusiastOwned

16 Stiezo

Edited May 30, 2012 by bristolbaron

[Marshall936 0]

Definately interested in an oem looking part, done things on the cheap with previous cars and its never the same.

 

1. bristolbaron.

2. Marshall936

[Critical_Mass 10]

Yup put me down for one in black Baz :D

[Johnny H 0]

Hi Baz, i'll be up for a gray 1 please,

 

OEM looking all the way mate.

 

Johnny

[dannyboy 0]

Hi baz,put me down for a black one plz.cheers man!

[krishen 2]

Hi, can you put me down for a black one.

 

Cheers.

[_Meth 0]

Black one dude for sure.

[BILLCOR 1]

Black please :thumbleft:

[bristolbaron 10]

Great stuff, cheers guys. I've been on the phone today to a couple of potential suppliers locally, as well as chasing the model in Indonesia.

Depending on the Bristol price, it could be worth staying local as it's easier to change/adapt etc rather than waiting for samples back and forth.

Also, the potential sting from customs could outway the savings!

 

I will update again tomorrow when I have more news.

 

Cheers,

 

Baz

[Johnny H 0]

Just to be a pain mate, can I change my gray 1 to a black 1 please??

Thanks Johnny

[bristolbaron 10]

Just to be a pain mate, can I change my gray 1 to a black 1 please??

Thanks Johnny

 

Not a pain at all bud - in fact it may make life easier!

Until I've been to the manufacturers tomorrow I wont know how easy it will be to do different colour runs once the moulds are made. They may have minimum order quantities for each colour, I'm not sure. Also, I Don't know yet how close a grey or beige colour match will be, whereas black is black!

[karmannski 0]

Hi can I order one in black please. Please send paypal detail to me. Please

[V33DUB 0]

I'll take a black one please

[Dude VR6 0]

I'd be up for a black one please

[G60 CS 0]

I'm up for one in Black

[bristolbaron 10]

All added! Cheers.

[Marshall936 0]

Can mine be a black one too mate, thanks.

[bristolbaron 10]

Can mine be a black one too mate, thanks.

 

No probs, hadn't realised that you wanted grey anyway :)

 

It may actually look as though these will only be available in black. Speaking with another manufacturer today they advised that to order a specific colour i would have to order half a tonne of material!! That's probably enough to do every corrado ever made!

They do have a grey available, but not in a leather effect and it's very very light grey so wouldnt match anyway.

 

By tomorrow evening I could have everything in place to get the ball rolling with this very quickly. I'll update as soon as i know more.

[Critical_Mass 10]

Good stuff Baz. Nice one :-)

[Jim 2]

Yes please Baz. In black for me.

 

Good work mate.

[P3rks 11]

Word up homeslice, put me down for a black one.

 

Peace x

[bristolbaron 10]

added!

[bristolbaron 10]

Okay, so a brief update..

 

I've got a company willing to make a run of 50 and costs will be discussed in detail on Friday.

They've taken my last sample to produce a model from and once I've said yes can turn this into a resin mould.

 

They will be available in black only and it will have a leathergrain effect to match the rest of the centre console.

 

My concern at the moment is that we don't have 50 people! Once I've established costs, I'll work out cost based on 20/30/40 people and then maybe it will encourage more to join!

 

So this is currently to say that it can happen and cost dependant will!

[Stiezo 10]

Jot me down for black as well please.

[bristolbaron 10]

So here's current state of play..

 

My original cupholder was used as a mould, for a plaster sample to be made up.

From that they've managed to make a rough first draft. I went and collected that and I'm impressed, but not 100% happy.

It does hold a can, but it wont drop quite to the base and the first ridge is slightly bigger, so a little bit rattly.

 

This is because I used guttering hose, not an actual cupholder as the original!

My options are to try and find another cup section, or to have one made in resin, but that could be big bucks. [£200-£300.]

Not a problem if i can sell a hundred, but too expensive for the numbers we're at currently.

 

I'm also struggling to find a supplier for 60mm rubber/foam circles for the bottoms of the cups. At the moment they're £1 each, or handcut.

 

I'm pleased with the leather look finish though - much better than the other supplier!

 

Excuse the Natch can, only cans in the house!