One very smart Corrado

[Kevin Bacon 5]

We bought 31 of them direct from Schrick at just over £1000 GBP each, including tax. That's £500 + TAX cheaper than RRP! Are there many VR6 (Golf and Corrado) drivers in Japan that would be interested in a Schrick Group buy?

 

£1000 is still a lot of money but all 31 of us have agreed it's worth money because it makes the car so much better to drive.

 

Only other source is eBay unfortunately.

 

Cheers

K

[Oichan 0]

The way that the wheels fill the arches looks great do you know the size and offsets? Or if they are running spacers. I love the five spokes, but havent seen them in the UK.

 

Probably.....

 

first one

OZ racing 7.5-17/ET35

 

next one

RAYS VOLK RACING CHALLENGE 8.0-17/ET??? that wheel is for the Japanese car. he modified PCD to 110/14mm and change colors.

[Storm 0]

Probably.....

 

first one

OZ racing 7.5-17/ET35

 

next one

RAYS VOLK RACING CHALLENGE 8.0-17/ET??? that wheel is for the Japanese car. he modified PCD to 110/14mm and change colors.

 

when it looks that good it was worth it.

[phaserno1 0]

sounds niccceeee oichan :D 8)

[Oichan 0]

We bought 31 of them direct from Schrick at just over £1000 GBP each, including tax. That's £500 + TAX cheaper than RRP! Are there many VR6 (Golf and Corrado) drivers in Japan that would be interested in a Schrick Group buy?

 

£1000 is still a lot of money but all 31 of us have agreed it's worth money because it makes the car so much better to drive.

 

Only other source is eBay unfortunately.

 

Cheers

K

 

Thanks!

about 203,000yen......... not bad! but, I don't have money now.

Because, I must repair an air conditioner. :lol:

Probably, only I am interested to that. Only I am the crazy guy in Japan. :lol:

[stel g60 0]

i bet it makes a nice change to a skyline or an evo 8)

[Oichan 0]

oops! 23:00 just now. thanks everyone.

Good night! ??? good afternoon? :lol:

c-ya

[Scott 0]

What paint did you use mate for that rocker cover / manifolds?

 

It looks seriously cool in black - I like that alot.

[Oichan 0]

What paint did you use mate for that rocker cover / manifolds?

 

It looks seriously cool in black - I like that alot.

 

I bought paints from the DIY shop. not special paints. It is a regular acrylic paints spray can. :lol:

[Scott 0]

But surely the manifold paint would burn off? :shock:

[Oichan 0]

But surely the manifold paint would burn off? :shock:

 

There is no problem in it at present. It will surely happen if I run the circuit.

I recommend using the heat resistant spray paint for muffler.

At that time, I was out of stock of the heat resistant spray paints. :lol:

[Scott 0]

Interesting ... did you need to 'key' the manifold at all for the paint to stick>?

[Jim 1]

Awesome Corrado is Oichans.. I think at some point or other every Corrado enthusiast ends up finding Oichans gallery and admiring the amount of work thats gone into it. Similar threads to this seem to come up every few months :)

 

And those Oz Superleggra's on that first picture of that Corrado look sweet... just a shame Oz wheels cost too darn much! :(

[Oichan 0]

Scott:

what's key? sanding? or ... I don't sanding or something. I wash it only with the detergent.

 

jimsG60:

:D

Yeah! Actually, first Corrado is beautiful.

OZ wheels is very expensive over there?

\51,450 in Japan.

[Kevin Bacon 5]

He means 'roughing up' the metal to give the paint a key to bond to. No need on the manifold since it's rough and will absorb paint nicely.

 

Oichan, you need to get a Schrick on that engine :lol: It's all about torque to show those Honda boys a thing or two 8)

 

Have a look at this:- http://www.mmm-five.net/Corrado/corrado.html

 

244lb/ft of torque!!!

 

K

[chubbybrown 0]

was there no oppotunity to get a Right hand drive Oichan

?

 

 

chubbzster

[vr6storm 0]

was there no oppotunity to get a Right hand drive Oichan

?

 

 

chubbzster

 

 

think someone mentioned on a previous post about how japanese enthusiasts try and get a car to the same spec as the country of manufacture.....so in this case it will be LHD :wink: and of course AFAIK Japan never saw the Corrado officially for sale there :wink:

[Jim 1]

Yeah! Actually, first Corrado is beautiful.

OZ wheels is very expensive over there?

\51,450 in Japan.

 

Everything is expensive over here Oichan ;)

 

Alloy wheels are no exception :(

[Majik 0]

Thats a shame vw didnt sell the corrado there or we could've been importing them back to britain and i think they would've been higher spec too :(

[ghee60 0]

beautiful engine bay (second pic)

Love the interior aswell, especially the dials

they reverse indiglow with led's lcd screens?

[Oichan 0]

kevhaywire:

Thanks I understand. yes no need 'roughing up' to the manifold.

How much is the total cost which is necessary to get Schrick? shipping to Japan?

and How do I pay its cost?

Sorry many question :wink:

 

chubbybrown:

yeah only left hand drive C in Japan.

 

vr6storm:

I think that Corrado which is right hand drive is very rare in the world.

 

jimsG60:

Everything is more expensive in Japan. :mad: :mad: :mad:

 

Majik:

what mean? low spec yours? not same J-spec C?

 

ghee60:

Thanks!

That dials is the DDI reverse indiglo gauges face and LCD with blue LED cluster lights.

The DDI has schedule to sell it again next month. I heard it from Anh(aka zarman) last month.

[ghee60 0]

thought the dials would be,

UK spec cars are generally lower specced than most other countries, and Jap spec is usualy much higher than our cars

[chubbybrown 0]

was it only the VR6 available in Japan or were the milder engine cars available as per model years ?

I.E G60 and 16 valvers ?

 

 

kora doshi 8)

 

chubbz

[Oichan 0]

UK spec cars are generally lower specced than most other countries, and Jap spec is usualy much higher than our cars

 

hummmm why??? but, The dealer of VW in Japan sold it at the very expensive price.

I dont need power windows, central locking system and dmun ABS ..etc. I need more power! :lol:

 

 

was it only the VR6 available in Japan or were the milder engine cars available as per model years ?

I.E G60 and 16 valvers ?

 

we have 90-92 G60, 92-95VR6 and 94-9516V.

http://www.oichan.org/gallery/shigs3.htm

His red 16V have Golf3's intake mani and full management computer.

[Kevin Bacon 5]

How much is the total cost which is necessary to get Schrick? shipping to Japan?

and How do I pay its cost?

Sorry many question :wink:

 

Keep an eye on here or http://www.vr6golf.co.uk as there may be another group buy. Schrick lower the cost to £1074 ( 217,736.35 Y) including tax if 20 are bought. Normal retail price in the UK is £1762 (357,217.36 Y) including tax. You would just add your name to the group buy list and pay by credit card.

 

I don't know how much it will cost to ship to Japan I'm afraid. About £40-£50?

 

It's worth the money :lol:

 

Kev