Cressa 44 Posted February 8 10 hours ago, tonedef said: Good to see this back in the daylight again, well done for seizing the moment. We must meet up some time like we said we would about five years ago! Looking like possibly May at the earliest before mine’s out again though, too busy offshore trying to keep the gas flowing at the moment 🙄 👍 Keep that gas flowing as I had to clear snow from off my drive this evening. 5 years 🤣 we should sort that soon then. Quote Share this post Link to post Share on other sites
_Matt_ 26 Posted February 9 Yay well done on getting the Corrado out and good luck with the MOT and tracking jobs. I've had man flu and bug after bug all of 2024 so haven't achieved much aside from remove my rear axle for refurbishment. How's the Golf coming along? Corrado is the Daddy though. Quote Share this post Link to post Share on other sites
Cressa 44 Posted February 9 55 minutes ago, _Matt_ said: Yay well done on getting the Corrado out and good luck with the MOT and tracking jobs. I've had man flu and bug after bug all of 2024 so haven't achieved much aside from remove my rear axle for refurbishment. How's the Golf coming along? Corrado is the Daddy though. Corrado officially booked in for 1st March 🤞 That Man flu is definitely doing the rounds at the moment so get well soon The Golf is moveable now so thatvmakes my life easier. It was supposed to be tuned today, but he didn't turn up.... stripping and sorting the bodywork next Quote Share this post Link to post Share on other sites
Cressa 44 Posted February 9 On 2/8/2024 at 4:01 AM, 1xshaunx1 said: Well done matey. Just in time for the supposed incoming spring weather. 🤣 watch this space.... is yours out and about or tucked up keeping warm? Quote Share this post Link to post Share on other sites
1xshaunx1 27 Posted February 10 Mines been tucked up warm mostly. It’s on holiday at stealth at the mo having a couple of things looked at. Quote Share this post Link to post Share on other sites
Cressa 44 Posted February 10 On 2/7/2024 at 10:03 PM, Dox said: I love a MK2 (can't afford one these days), but there's no comparison between the Corrado and a more door? My Corrado is sulking (6 years standing) and won't start ATM What's the corrado doing/ not doing Dox? Quote Share this post Link to post Share on other sites
Cressa 44 Posted February 23 7 days and counting. Mot time... Been a while since I last drove her, getting on 2 years I think. Fingers crossed 🤞 she passes Friday then time to give her a blast Quote Share this post Link to post Share on other sites
ChrisL 15 Posted February 23 Looking nice there mate, I’m sure it will pass. bet it will be great to finally get out in her again. Quote Share this post Link to post Share on other sites
Cressa 44 Posted February 24 Looking forward to it 😀. Hopefully I have found a better garage to MOT it. The last one failed it on a loose nut!! I took it straight home, checked everywhere and Nothing loose.... straight back having a tantrum and then it passed.. An unnecessary Fail on the history 🤬 Quote Share this post Link to post Share on other sites
Cressa 44 Posted March 1 Pinch, punch 1st day of the Month. The Corraco has gone for her MOT and looks ridiculously small next to other cars. Interesting that as I pulled in the MOT centre, the mileage has just hit 123 456 miles. What's the chances of that 😀 Anyway🤞🤞for a miracle Quote Share this post Link to post Share on other sites
1xshaunx1 27 Posted March 1 123 456 miles. What's the chances of that 😀 pure madness must be a Devine sign. good luck 👍 But I don’t think you will need any of that, it looks great. Quote Share this post Link to post Share on other sites
Cressa 44 Posted March 1 Thanks mate. I'm still waiting for the phone call. I also asked then to do the tracking so I took the centre caps off. Hopefully see you when it's all legal Quote Share this post Link to post Share on other sites
Cressa 44 Posted March 1 (edited) Well, it's a PASS so happy days. Grateful that they sorted a few issues before, that were needed but it all comes at a price. They have struggled to sort the camber out..... as everyone seems to with this car. Does anyone else have issues getting their tracking set up correct. I believe most of us are slightly lowered, but that's all it has. And it does have a camber adjusting bolt either side of the struts. But the big win was filling the 70l tank up with Super Unleaded and using the Nectar points to pay. It only cost me £2.80 👌 Edited March 1 by Cressa Quote Share this post Link to post Share on other sites
ChrisL 15 Posted March 2 Congrats on the pass, bet it’s great to be out in it Quote Share this post Link to post Share on other sites
tonedef 8 Posted March 2 17 hours ago, Cressa said: Well, it's a PASS so happy days. Grateful that they sorted a few issues before, that were needed but it all comes at a price. They have struggled to sort the camber out..... as everyone seems to with this car. Does anyone else have issues getting their tracking set up correct. I believe most of us are slightly lowered, but that's all it has. And it does have a camber adjusting bolt either side of the struts. But the big win was filling the 70l tank up with Super Unleaded and using the Nectar points to pay. It only cost me £2.80 👌 Congratulations on the pass and the £2.80 tank of petrol! The camber adjustment on the Corrado is awful, designed to be set by trial and error it seems. When I did mine I measured the difference between camber on the ground then at full droop when on stands, I then set the camber allowing for the difference before putting it back on the ground to check. I don’t have camber bolts in it, only the standard bolts in the slotted holes in the Komi coil overs. I did the tracking with the car sat on 8 breeze blocks then set up straight edges down both sides of the car using a tape measure and lots of patience to get centralised and parallel. That way I could measure the exact toe with the car on its wheels but still get underneath to adjust it. Don’t think I’d make much money selling my services though as it took me a few days all in. It worked OK though as I then had the alignment checked using the laser set up at a local tyre place and it was spot on. Quote Share this post Link to post Share on other sites
_Matt_ 26 Posted March 3 Well done the pass, good news. Camber is like tonedef and a pain to set up. There is some movement on the knuckle to the two strut bolts bolts into. I do the same and measure on ground and full droop. Never get it perfect and it always messes the tracking up. I wish there was a way to maintain the tracking whilst adjusting the camber, if anyone knows let us know! Quote Share this post Link to post Share on other sites
Cressa 44 Posted March 3 Thank Matt. I may take it back to the Nottingham wheel alignment centre near my work. He did it last time and made it good. I need to stop messing with the front end and then i wont create this problem Quote Share this post Link to post Share on other sites
Cressa 44 Posted March 8 Managed to get the car out and brave a 30 mile motorway journey to work. The car never missed a beat, sitting at about 90° water and 106° oil. Mpg wasnt to bad as i took it steady. . At some point I added the one touch indicator relay which is a godsend for changing lanes. Also fitting the heated seat elements from Classic parts made my journey lovely and toasties. No knocking noises from all of the bloody pot holes either which is nice. The car seems to be behaving 1 Quote Share this post Link to post Share on other sites
Wild-Animal 0 Posted March 17 thats great! such a good build thread. Quote Share this post Link to post Share on other sites
Cressa 44 Posted April 2 Came off nights and the 1st decent day in a long time, so gave the interior a clean with a carpet spot cleaner machine. Dirty dirty water so it must have done something good. Dried stain free thankfully. I still need to sort the tracking and the tyre the garage flipped round keeps losing pressure!! As we all know these keep us busy, but it was a nice day and a couple of great C porn pictures topped it off Quote Share this post Link to post Share on other sites
Cressa 44 Posted April 4 Took her for a re-gas of the aircon today. Slowly chipping away at the little jobs that need doing. And still no strange knocks or bangs whilst driving thankfully. Quote Share this post Link to post Share on other sites
Cressa 44 Posted April 23 Took her out for the drive to work as I needed to get the wheel alignment set up properly . I had a steady plod down the motorway and she behaved very well Quote Share this post Link to post Share on other sites
tonedef 8 Posted April 23 Good to hear you’re out and about now, planning to get mine on the road at the start of May 🤞 Mine tells me it’s done 38mpg or so, but do the maths and it’s about 32mpg! Quote Share this post Link to post Share on other sites
Cressa 44 Posted April 23 Be good to see yours out. The MPG, is always off, and the spirited drive home never saw those figures 😁 Quote Share this post Link to post Share on other sites
