TrumpieVr
Members-
Content Count
45 -
Joined
-
Last visited
Content Type
Profiles
Forums
Blogs
Calendar
Articles
Gallery
Downloads
Store
Everything posted by TrumpieVr
-
Interested in bonnet cable does it come complete with trumpets etc?
-
Hi, I've got a intermittent problem where the engine will cut out while driving, no ignition lights come on etc but the engine just dies with no other signs before hand. It won't bump start(seems to have no spark)but will restart straight away so can be done while still on the move by dipping clutch. Doesn't have a problem starting any other time so have ruled out ignition switch only thing I can think is its either ecu relay or crank sensor but either way confused why turning key off and restarting again clears fault such that I can drive for an hour or so. Thoughts. Thanks
-
Mailed him this evening waiting for his thoughts.
-
Yes to Stealths instructions, first 500 miles no more than 3500rpm then oil and filter changed then 500-1000 miles no more than 3600rpm then increase 100 rpm for every 100 miles. At 2500 miles went back to stealth, another oil and filter change and check over, checked compression and all OK between 180 and 210 from memory.
-
Hi been trying to get to the bottom of high oil usage on my Corrado and have come to a dead end so thought I'd look for ideas of what it might be here. Basically it uses around 1ltr for 200 miles of hard driving using high revs (but sounds great:cool:) and about 100mlt for every 100 miles of normal motorway driving. It doesn't have a leak and doesn't seem to smoke (not that I've seen)however I can smell oil on occasions when waiting in traffic after a run and the engine is hot. So far I've had the stem seals changed twice, had the whole engine rebored and rebuilt,had a replacement rebuilt head fitted. All this has been done by Stealth so I have no issue with workmanship but it still uses oil. Any help would be appreciated Cheers
-
Just seen AD and noticed the Number plate. My C is M536GGJ in the same colour and similar spec and miles. Freaky.
-
Mystic Blue spotted just outside Stowmarket on the B1113 at 09.20. First spot while driving mine, sorry for not putting hand up you caught me by supprise.
-
Corrado Lower Front Grille - Late 16v / VR6 - 535853671J
TrumpieVr replied to StueyB's topic in Parts for Sale
Payment made along with delivery details Many thank -
Corrado Lower Front Grille - Late 16v / VR6 - 535853671J
TrumpieVr replied to StueyB's topic in Parts for Sale
Hi StueyB Is the lower grill still up for grabs, if so can I have it from you? Send over payment details and cost of delivery and I'll get it sorted thanks -
Payment sent over PayPal, thanks
-
Hi, Is the gear knob still available, if so can I have it? If you could send over payment details I'll get things under way thanks in advance. Craig
-
Hi What year VR6 did it come off?
-
Vr6 Bury St Edmunds Suffolk
-
Spotted red L plate parked at Whittlesford Parkway Cambridge this morning. Not seen before, wondered if it has come out of hibernation.
-
Pm'd Thanks Craig
-
Hi Dave Looking at fitting a short shifter to my VR in February have you got any in stock yet, and how much are they currently? If it is easier I maybe able to get the original removed and sent to you for the mod but how long would that take to get back to me. The car will probably be in bits most of February. Thanks
-
1995 (M Reg) Corrado VR6 Breaking - Updated with Pictures
TrumpieVr replied to P3rks's topic in Cars for Breaking
Hi Don't suppose you still have the plastic rear seat belt guides (the bit the belt runs through) If so how much? Thanks -
Cheers thanks for your help
-
Thanks I'd also checked Arz but wasn't sure if they had any RHD ones. I agree should have been standard fit. Hopefully I get luck if someone breaks a rado long shot I know. Is a fresh production a possibility? Do they do that sort of thing sorry for the questions new to corrado ownership.
-
Can any one help I'm after a amp/oil pressure gauge for a 94 VR hopefully with loom and pressure switch. Any ideas. Thanks