Heardy

I'm pretty sure there's an adaptor ring that would make it fit,then again you might as well buy another boss kit instead .. I had a similar problem when trying to fit my snap off kit :roll:

These guy's are Bosch agent's,we use them at work http://www.andrewpage.com/products.asp give them a call and see how much a new MAF is from them

Give him a break VR6 , as he said at the begining he was only THINKING of selling his car so he was just after some advice ....

One of our customers at work has just got one co it's nice to know someone who work's at a Audi dealership ,looking forward to speaking to you soon Nelson Wilbury :roll: O buy then way up to to now i've had the creaking roll bar bush's :shock:

Cheers Storm :wink:

Can someone tell me how much a genuine Diavia condensor is , i'm sure someone on here know's :roll:

Yeah 350Z looks 8) Shame it's got a renault engine :(

I'm just replacing my flexible brake hose's and just about all the steel pipe's and fitting some Goodridge braided brake hose (bought from GSF) ,and i'm just wondering which is the best fluid to use ? I've seen some Castrol perfomance fuid but it's synthetic will that be okay or have you got any other sugestion's :roll:

Ther under the water tray as you said .You just need to have a really good look...

I've just done mine i think it took me about 2hrs to get it out (on and off) it's not difficult really just a bit time consuming . You'll find it easyier than the 306( horrible french crap). There are 2 nut's under scuttle panel (under the bonnet ) that you need to undo ,i'm glad i read the previous post's about removing a heater matrix otherwise i would never have found them :roll: .If you need any help let me know :wink:

I've priced some billstein's up at Euro Car Parts and they are about £24 +vat for the front's and £18 ish for the rear's . They do another type of billstein shocker but there about the same price as Koni's :shock:

The guy i bought my corrado off bought a brand new cooper S :shock:

Yeah so i noticed but that's what they said when i called them , i also got the same reply from everyone else i called about them (to much hassle)

As i said the ride was Excellent on the Golf VR6 i had so i just want some half decent shock's :) As Coullstar said what Bilsteins do i need ? I can give GSF a ring tommorow once i know

I called venom and they said they don't do them for the corrado because it's to much hassle because of the different size's..

Cheers Gavin 8)

I'm after the part number for the 2 counter sunk bolt's that secure the brake load sensing valve to the rear axle . Cheers

What shock absorbers are you using with them ? I cant really afford Koni's what other brand of shocker can i use instead,i'm sure there's someone on here who's using some virtually standard shocks with them :roll:. I used to have a Golf VR6 with Eibach's on and some shocker's that i bought from Volksbitz and the ride was excellent (even with 17's on) Also they were height adjustable on the rears . I've tried to order somemore from them but they keep saying they are waiting for another shipment.... What other brand can i use ?

As with any sound equipment - the manufacturer is far less important than the speaker "distortion" measurement. The best speakers/amps are the ones with the lowest distortion levels. :wink: As Kev says - speaker cabinet design & connecting cables are also just as important as your speaker choice. Where does it list the distorsion level's?

There not for me i'm just asking for a mate...Are Kenwood sub's any good?

O right i see.The other problem is i'm not sure if the min and Max button's are connected correctly as when i replaced the heater matrix the connection's on the back of the switch's came off and i'm not sure if i've mixed them up :roll:

What's the best 12" sub's you can get for around £40-£60 i've been looking at car audio direct and the prices don't seem to bad.What do you reccomend :roll:

Had it pressure tested today and regassed and it seem's to be working fine upto now :) I've just got a couple of questions to someone who's got a C with aircon The actual pump only opperate's when you press the max button is this correct ? What is the function of the min button i can hear something opperating inside the heater box jm just a bit curious really :roll: Also the cooling fan's don't opperate when the aircon is switched on, as far as i'm aware one of the relay's under the bonnet switch the fan on but which one :roll: Any other info about it would be appreciated Cheers Jason

I've just changed mine not difficult really just a bit time consuming (mine's got aircon as well not that it makes that much difference) .If youre going to do it you might as well take the dash out completley it will make life much easyier...I think it took about 2 hours on and off just to get the matrix out!! And I did mine at the side of the road :)

That was a beauty too!! Was wondering when this car would crop up. You beat me to it. I was down to view that car the following night. Was in Autotrader about 3 months or so ago. He didn't advertise the fact that it had an A/c either. Damn nice car, congratulations. Yeah i'm pretty pleased he didnt' mention the A/C in the advert as it does'nt work but i'm hopefully getting it gassed up this week .I think it's probably goin to need a new condensor to sort it out but it should'nt be a problem as i'm in the Trade..I've just fitted a new Heater matrix cost me £30 not a bad job to do :roll: .I can't bel ive how much he spent at the maindealer's :shock: