corradlo

Thanks for the Part Numbers, very useful! I'm still trying to work out which ones to use, i now have the 2 pressure switches fitted into the oil filter housing. I now need to find a suitable temp sensor, i need one that takes a single spade connector as per the other 2... the part number you mentioned shows a sensor with a different type of fitting and i believe is to go on the head? To clarify this has only become an issue because i am building a cleaned bay 16v abf on Jenvey ITB's and i build it up from a bare block without the old one for reference ( big mistake lol ) also i have a bespoke wiring loom to add to the mix. Part of the build includes ensuring the loom doesn't have to travel all over the bay so im trying to keep sensors close to each other (within reason). Also coming back to this build after are few years has not helped lol.... The help and knowledge on here has proved super useful. Much appreciated

Hi mate, thanks for this ... i ended up ordering one of those from a different listing! Much appreciated

Wow, I forgot how responsive you guys are on this forum, I always get some good advice quickly on here! Keyo, im replacing the ones on the oil cooler housing , the beru looks good , do you have a link for the correct ones for the front of the block? FenderVg, I did have a quick look on parts cat but when trying to order there are lots of variations now , I will try again, thanks for the link.

Gents, I know this has been asked before but i cant seem to find a decent answer.... Does anybody know parts number or have links to the oil sensors that go into the housing on a abf or 9a? I have 3 spaces for sensors and i would like to buy new parts. I dont have the old sensors for reference anymore. Thanks in advance!

Hi All Im after the speedo drive sender that fits onto the gearbox to give a reading on the clocks. If you have one drop me a msg on 07900911190. Thanks

Hi , how much for the gearbox speed sensor? Thanks

Hi , im interested in the loom for the clocks , could you pm with a contact number? Thanks

Gents Im after a loom for a set of clocks from a late 16v/9a or G60. Please give me a call on 07900911190 if you have anything, or drop me a msg on here. Thank you

Thanks for the info! I have managed to find a set. :)

Hi all I am after a set of clocks either maybe g60 or late 16v , they must be the type that use a sensor for the speedo not a cable! Drop me a msg or call on 07900911190 if you have anything suitable. Thank you

Mods can you close this thread pls. Big thanks to troy for sorting me out. Cheers

As per title gents I'm after a complete early headlight loom. From the fuse box to the lights/indicators etc..... I know it's a long shot but if anybody has one give me a shout on 07900911190 or msg cheers!

Any chance you could send me over a pic , so i can make sure its the same one? also is posted to reading , or if you are not to far i can pop over

Can't find a part number , but will call vw, how much are you after forthe whole thing ?

That's the one!

As per title gents, I only really need the plastic pipe that goes into the cylinder so condition of actual cylinder doesn't matter I'm based in reading , call or txt on 07900911190 if you have one , cheers

Looking for an early 16v gearbox, not worried about internals , need housing only, so anybody has a damaged box (with good housing) or housing only, please let me know. 07900911190

As per title gents, if anybody has all of the parts needed to swap out my early valver O2A shifter with mk4 setup, please give me a shout. 07900911190

fair enough, must just be me!!! cant think why it would do it, maybe have to investigate further. What exhaust manifold did you use for your conversion?

Gents I have managed to get an abf into my early 16v raddo bay, howvere when looking at from the front, it looks as thought the gearbox side of the engine is sitting a little low??? All of the mount and brackets are from a 16v kr. i will machine up a spacer if needed, just wanted to know if anybody else has this problem!

As per title gents, after a suitable 4 branch for an abf into a corrado/mk2. If anybody has one, drop me a line on 07900911190 cheers!

spacer sounds interesting, that seems a good way to do it, when the engine goes back in i will do some mock ups to see what works.

ive just come across this thread, i thought it was only my car. Had the screen replaced, and it was a horrible task for the guy, he couldnt get the screen to sit properly, anyway after a few hours of messing it up, he finally got it in and the fit is horrible. The seal doesnt fit correctly etc... it bothers the hell out of me, so im gonna either get them to remove it, or get my bodyshop to do it correctly. Be careful with these co called professionals. i could probably do a better job myself!