Neil L.

Just wondered - whats the name of the e-bay seller - im still waiting for mine to arrive?

Keskins KT-1's better the ZX1's in my eyes - but the 17's width is 8.5 :( - would need arch mods to look right hence more money and time - anyway I dont want to mess the great lines of the C - rather find a wheel 7.5 or 8' wide with no arch mods. Could have had set of 17' KT-1's with Toyo's for £1000 :( :( :(

Got tobe so careful picking rims - best part of £1000 for decent set!

Anyone chop um' on for me??? Blackberry car!

Not to anybodys taste then i think!

Thanks for ALL your opinions! :D :D :D :D

"Angel eyes" - looks more like "Evil Eyes" - quite menaceing!

These suit a Blackberry VR6?

Does anyone know if these can still be bought new and where from?(How much?)NB 17's. Cheers!

I've got to admit the Keskins in the top pic look a little bigger than the ones in the second pic - I would suggest perhaps they are 17'? The reason for asking is that i might buy these wheels for my VR6 - but dont want too much trouble in fitting them as they are 8.5 by 17(8 by 17 not available) - 17 is my prefered size :) Well its either these or BBS RC's (if i can still get!) on my Blackberry car - your opinion please!

What do u think - are these 17' or 16's and what width tyres are they at a guess?

Just a quick ? - I want to do the same with my 94"m" VR6 - I already have Koni TA's but with standard springs - going to buy H&R's very soon with the old type top plates etc. How much will a garage charge me (approx.) to remove the standard springs and fit the H&R's and adjust etc?PS how can u tell if your car has/has'nt got the old type topplates?

But sometimes it works - then it does'nt? The fans are working more regularly now! They will run for a while then just cut out! Wait a few minutes then they operate again on speeds 1-3. Speed 4 always works by the way! Resistor pack or dodgy wires or motor?

Those wheels on subject car look very much like Keskin KT-1's - prob my fav wheels on a C!

When u say MK4, i assume u mean Golf MK4?

Is the fan motor & resistor for the interior fan controls the same for all models. I have a 94 "m" VR6!

Are these red Beru's supplied by VW? How much?

Anyone point me in the direction of a good quality set of HT leads for 94' VR6 - I'm after direct replacements - no changing connectors etc. Cheers!

Think the h/gasket is gone on my VR6 - tell tale signs today were slight creamey sludge in filler cap :( I checked engine faces and can see signs of small leakage. The most anoying thing is i don't hammer the car anyway! Think it was probably on its way out when bought from previous owner - had only for 3 months. Bit surprised really as the engine is only 2 years old (new head/block fitted 2003). Anyway is there any other way i can check to make sure the gasket is gone and what damage can occur if i drive the car for much longer? How much to repair?

Anyone out there who's fitted H&R's with Koni TA's? My car is 1994 "M" VR6 - I've been told i'll need the old type top mount plates to take the H&R's springs. Is this correct, and anything else i should replace(2 bump stops for rear) when changing to these springs? :|

Which make of rear lights would u recommend for my 1994 VR6 Corrado? I want a make that is a direct replacement from stock, and that actually fits well! I hear that some require modification and are not a good fit??? My car colour is Blackberry - I fancy the Red/crystal M3 style Lights - what do u think?

Can anyone tell me what wheels these are and where i could get them from? 8)

So lets get this straight. The fan controls with plastic knobs etc is £149? The plastic panel surround(includes vents?ashtray? or anything else?) is £97 - Correct? :?

Does anyone know if the centre dash panel is still available from VW - the one that includes the fan switches and ICE cutout etc - if so how much?

I'm experiencing strange fan control goings on' - the fan speed control was fixed by previous owner who replaced the fan thermal fuse before i bought the car - all was fine for first week or so! Then the speed control (fan) only worked on speed 4 on the dial - so i thought the fuse has blown again! I went on like this for a month or so knowing i would sort it out one day- just using speed 4 on dial for timebeing! Then tonight the ruddy fan starts working on all 4 speeds again! :roll: - cant have been the fuse! This was followed by again failing on 1-3 for a short time then regaining the full 4 speeds before i parked up tonight :? Could this just be the actual dial itself not making proper contact or is there something else???