billinjah

35's are gonna give a real crashy ride i want cool wheels but still be able to thrash it and not worry about denting a rim or rattling my teeth out i may just go back to the old skool and get some 15" splits then i can lower it till the handles touch the ground if the mood takes me!

speedo is as accurate as the sun newspaper anyway! am i still going to have to take an angle grinder to the arches???

the tyre place said the tyre would bow in the middle causing it to wear unevenly and get poor traction dont really want to be hacking lumps out of the arches its not stupid low really perhaps 60mm lower than std at the springs id rather have more profile to have a softer ride i like the stretched on look but you dont get much protection for the rims! ill have to think about this would i get worse rubbing with the 215's as they are wider but still not as wide as the wheel? i suppose i can raise it then lower till i get problems then raise it til i dont!

g-man may be a help here im going to get a set of borbet a's in the above size my tyre supplier said that 40x205's would be too stretched and 215's would be better or possibly 205x45's any thoughts the car is lowered on coilovers and the arches are rolled having said that my 17" azevs catch occaisionally with 205 40's

swap the switches too??

same goes for porsches though eh rodders??

nice i like? do they fit early door cards as well need to get some measurements as the muppet who had mine before me cut the leather to put his horrible pods on :mad: some people really have no sense!!

has anyone put a leather handbrake gaitor on their c mines missing the plastic bit n top of the handbrake and ive just seen the momo handbrake handle and gaitor looks well bling just wondered if any one had any tips on putting one on how to attach it securely etc?

Does any one do door pods for the early door cards? mine has some really horrible home made efforts :(

i think most of us would :D

cheers guys it was the speaker cable shorting out nice one

do powerflex do a cross member kit? cheers 16vg60 forgot this was rubber mounted anyway ill wait till payday and send you a pm.

are there any common causes for misfire on g60's im pretty sure its the ht leads as ive done the plugs dizzy cap and rotor arm the leads are in a right state im just waiting for them to arrive its real intermittent perhaps once every few weeks it will mis for a few minutes fuel filter worth doing?

yeah i can see that working its very stiff to turn by hand.

since i brought my g60 the heater hasnt worked spent the best part of a day replacing a perfectly good thermostat!! but i found tonight it was the bowden cables they werent broken just been crimped too tight buy whoever had replaced them their held on by little metal clamps and mine were too tight so i wouldnt move over to the hot setting just need to replace them now!!

are there any dangers of using a solid mount? could you get stress fractures over time if not and all is safe sod the VT mount ill take one of yours mate how do i go about doing this??

id contact pvw see if they have any back issues they featured his car a lot late 90's early 00's maybe the golf too Bill

that aint bad then do you use the same sandwich plate when you remove the oe cooler thingy?

Cheers Henny im gonna get those bad boys now some for sale polished near me who make the best adapters?? also what size tyres woulod be best to run i see scruffydubber uses 195/4/16 would 205/40/16 be ok or would they rub ive got rolled arches already

ive been scouring the forum for ideas as to what should be my next move ive got a stage 4 charger and 68mm pulley with a jabba chip im pretty sure my injectors need a refurb but it seems cheaper to replace them i have read that redtops are an overkill but g-werks seem to favour them. also im sure my fpr hasnt been upgraded to a 3.5bar item is this a must?? also oil coolers some people seem to have them others dont i did the filter the other day there doesnt seem to be any room to put the oil cooler sanwich plate in as well the filter is very close to the cross member (proper g60 filter with a nut on the top) any thoughts any price ideas would be very helpful i just want to make sure everything is how it should be before i go for a front mounted intercooler.

Hi anybody got a pic of a corrado with these wheels on polished on a dark car if poss i know some say they dont suit the corrado but im just curious i like old skool wheels i think they might work

bit too involved do you need to buy new sealing strips any idea where i would get the rims from?

another mountainbiker!!!!! what do you ride??

MI5 VW Top seller sent more than i asked for!! brilliant

leon top seller great grill bargain cheers mate!!